Fabrication Enterprises Inc 12-2100 24 Hour Combination Stop Watch Instruction Manual
- June 14, 2024
- Fabrication Enterprises Inc
Table of Contents
Fabrication Enterprises Inc 12-2100 24 Hour Combination Stop Watch
Key Features
- Stopwatch displays hours, minutes, and seconds up to 23H 59M and 59S
- 1/100 second precision (for first 30 minutes)
- Clock mode with automatic calendar
- Programmable alarm beeps with a chime
- Dimensions : 2.5 in x 3 in (6.4 cm x 7.6 cm)
- Battery included : LR44/G-13 button cell|
Using Stopwatch Mode **
**
Press “B” once while in “Clock” mode to enter “Stopwatch” mode. 0:00 should be displayed and the top bar (——-) should blink. Push “C” to start the time”C” to start the timer. Push “A” to display the lap time without stopping the timer. Press “A” again to display the real-time timer. Push “C” to stop timer, then press “A” to reset timer to 0:00.
Replacing the Battery
When display becomes dim or shows no numbers at all, it is time to replace
the battery. Remove the back cover by loosening the back screws with a
screwdriver. Replace the battery with LR44/G-13 button cell battery.
Using Clock Mode **
**
Hold down button “A” to show the A preset alarm time. Pushing button “B” changes the display “Mode”. Hold down button “C” to show the month, date, and day of week.
Setting the Time and Date **
**
- While in “Clock” mode, press “B” three times to go into the Time and Date setting mode. The “seconds” numbers will blink. Press “A” to get the “minute” numbers to blink, then press repeatedly “C” to adjust.
- Press “A” to get the “hour” numbers to blink. Then press “C” repeatedly to adjust. (A and P sets AM /PM clock, H sets 24-hour clock).
- Press “A” to get the “day of the month” to blink, then press “C” repeatedly to adjust.
- Press “A” to get the “month of the year” to blink, then press “C” repeatedly to adjust.
- Press “A” to get the “day of the week” icon to blink (-). Press “C” until the icon (-) is under the correct day of the week printed on the stopwatch. Press “A” again and then press “C” to confirm the time and date.
Setting the Alarm **
**
While in “Clock” mode, press “B” twice to go into the alarm setting mode. The “hour” number will start to blink. Press “C” to adjust the hour A and P sets AM /PM clock, H sets 24-hour clock). Press “A” to set the hour, then the “minute” number will start to blink. Press “C” to adjust the minutes (Note: Holding onto “C” will adjust the numbers faster). Press “A” then “B” to set the alarm.
Turning On / Off the Alarm
- In “Clock” mode, hold “A” and press “C”. The alarm icon (E) will appear when the alarm is set. Hold “A” and press “C” again to turn off the alarm. The alarm icon (e) will disappear.
- When the alarm is turned on, and the preset alarm starts to sound, you can turn it off by pressing “A”. Or you can snooze the alarm by pressing “C”. The alarm will sound again in 5 minutes.
Turning On / Off the Hourly Chime
- While in “Clock” mode, hold “A” and press “B”. The chime icon will appear (——) when the chime is turned on. The chime will beep once an hour when this is on.
- Hold “A” and press “C” again to turn off the chime. The chime icon (——) will disappear.
Fabrication Enterprises Inc. 250 Clearbrook Rd, Suite 240
Elmsford, NY 10523 (USA)|
fax: +1-914-345-9800 •
800-634-5370
FabEnt.com
Breite strassey Consuling GmbH
Breite Strasse 3
40213 Düsseldorf (Germany)
©2022 FEI, all rights reserved.
Baseline is a trademark of Goldberg.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>