Govee H6078 RGBICWW Cylinder Floor Lamp User Manual
- June 8, 2024
- Govee
Table of Contents
Govee H6078 RGBICWW Cylinder Floor Lamp User Manual
Safety Instructions
Read and follow the safety instructions below:
- Use the product with the provided power adapter only.
- Use it indoors. The product is not waterproof. Do not expose it to areas susceptible to water splashes or water drops.
- The internal light sources cannot be replaced. If the light sources sustain damage, the product should be replaced.
- Do not leave children unattended with the device. Children must be supervised by an adult while using the device.
- Do not disassemble or modify the device and its accessories.
- Avoid installing the device near potentially dangerous sources or heat sources (e.g., candles, liquid-filled objects.)
- The working temperature should be between 14 to 104°F (-1 Oto 40°().
- Store the product in places where the temperature is within -4 to 140°F (-20 to 60°() if you do not plan to use it for a long time.
Introduction
Thanks for choosing Govee RGBICWW Cylinder Floor Lamp! This product is
suitable for the living room, bedroom, working room, etc, which plays a role
as your helpful
“ambiance assistant”. The device can be controlled via buttons, app and voice
assistants. Through Govee Home App, you can adjust the brightness, color
temperature, change the colors and set multiple timers. With various scenes
and music modes preset in the app, you can easily switch effects to your
liking. In addition, you can bring your creativity to the lighting with the
DIV Mode.
What You Get
At a Glance
Installing Your Device
-
Connecting the Lamp Poles: Connecting the three lamp poles in order.
-
Connecting the Lamp Pole and the Lamp Base: Put the cable through the lamp base. Then, turn the screw to tighten the lamp pole and the base.
-
Connecting the Lamp Head with the Control Box: Before connecting, please take off the silicone cap from the connector. After connecting the lamp head and the
control box with the connector, turn the screw to tighten them. -
Connect the Lamp Head with the Lamp Pole: Turn the screw to tighten them.
-
Connect to Power: Connect the adapter to the lamp via the DC charging port and plug the adapter into power.
Pairing Your Device with Govee Home App
What You Need:
- A Wi-Fi router supporting the 2.4GHz and 802.11 b/g/n bands. 5GHz is not supported.
- Download Govee Home App from the App Store (iOS) or Google Play (Android). Log in with your account (new users need to create an account).
- Turn on the Bluetooth on your smartphone.
- Open the app, tap the”+” icon in the top right corner and search for “H6078”.
- Tap the device icon and follow the on-screen instructions to complete pairing.
Specifications
Troubleshooting
-
Cannot connect to Govee Home App.
a. Check if the lamp has been powered on.
b. Check if your smartphone’s Bluetooth has been turned on or try connecting the lamp to another smartphone.
c. Ensure that your smartphone is near the lamp when connecting for the first time.
d. If the problem persists, go to “My Devices” page to delete the device and follow the previous instruction to reconnect. -
Cannot connect to Wi-Fi.
a. Check if the lamp has been powered on.
b. Do not skip connecting to Wi-Fi during the pairing process.
c. Ensure that your Wi-Fi router is 2.4GHz capable (5GHz is not supported).
d. Ensure that you entered the correct Wi-Fi password during the Wi-Fi connection process.
e. Shorten the distance between the device and the Wi-Fi router to less than 50ft, then try reconnecting.
f. Use another smartphone to pair with the device to check if your Wi-Fi network is working. -
Cannot pair or connect with Alexa or Google Assistant.
a. Ensure that the Wi-Fi connection is stable.
b. Go to the app Settings page and follow the instructions under “User Guide” to pair the device again.
FCC and ISED Canada Statement
This device complies with Part 15 of the FCC Rules and Industry Canada
licence-exempt RSS standard(s). Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can
radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian ICES-005.
FCC and IC Radiation Exposure Statement
This equipment complies with FCC and IC radiation exposure limits set forth
for an uncontrolled environment. This equipment should be installed and
operated with minimum distance 20cm between the radiator & your body.
This device uses a non-replaceable light source. When the light source reaches
the end of its life cycle, this device should be replaced. Not intended for
illumination. Only used for creating ambiance.
- Do not connect the rope light to the supply while it is in the packing or wound onto a reel;
- Do not use the rope light when covered or recessed into a surface;
- Do not open or cut the rope light;
Responsible party:
Name: GOVEE MOMENTS(US) TRADING LIMITED
Address: 13013 WESTERN AVE STE 5 BLUE ISLAND IL 60406-2448
Email: support@govee.com
Contact information: https://www.govee.com/support
FOR INDOOR USE ONLY
POUR UNE UTILISATION EN INTERIEUR UNIQUEMENT
Govee is a trademark of Shenzhen lntellirocks Tech. Co., Ltd.
Copyright ©2021 Shenzhen lntellirocks Tech. Co., Ltd. All Rights Reserved.
YouTube
Instagram
Tiktok
Twitter
Facebook
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>