Allison QSG-USBT3.0 USB Translator Instruction Manual

Allison QSG-USBT3.0 USB Translator Instruction Manual

NOTE:
Adapter is powered by the vehicle and must be connected to operate.

*Ensure that the USB cable is firmly seated into the adapter’s USB port

INSTALL DRIVERS

1. Close running applications.

2. Users can download adapter drivers online by visiting www.noregon.com/adapter-drivers and clicking the “Instructions and Driver Download” button from the “USB Translator 3.0” section of the adapter driver landing page.

3. Once the download is complete, launch the installer and follow the prompts.
   CONNECT:

4. Connect the D89 end of the USB cable to the port labeled Computer on the USB Translator 3.0 Adapter.

5. Plug the other end of the USB cable into the USB port on the PC.

6. Connect the diagnostic cable to the 26-pin connector on the USB Translator 3.0 Adapter.

7. Attach the diagnostic cable’s connector to the diagnostic port on the vehicle.
   

To order additional cables or replacement parts, visit:

allisonstore.noregon.com

QSG-USBT3.0-2023-02-072823

References

• Allison Transmission
• Adapter Drivers - Noregon

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>