rizoma PT315 Fox Plate Holder Kit User Manual

Welcome to Rizoma

User Manual    Rev.: 04

– Before you start

We are pleased to welcome you into the world of RIZOMA, and we congratulate you for your excellent choice. Please carefully follow the instructions in this guide, which will allow you to mount and use the product correctly and enjoy all the features it has.
For your protection and safety, RIZOMA expressly recommends that you have the installation of the product performed by skilled personnel. Improper installation, repair or maintenance, can cause accidents. Keep this user guide as a reference for the future.

© 2021 RIZOMA

General conditions

– Attention: This component comes assembled for shipping purposes only. Tighten all fasteners to appropriate torque specifications before riding.

Descriptions preceded by this symbol contain information, instructions, or procedures, which, if not followed, may result in death or serious injury.

1. Carefully read, understand and follow these instructions, they are an essential part of the product. If you have any doubt whatsoever regarding the installation or use of your RIZOMA product, please see your authorized RIZOMA dealer for assistance (on www.rizoma.com).

2- For correct installation, all tightening has to be done after the correct positioning of the accessories without restricting the moving parts, to not compromise the correct functioning of the product.

3-After installing any Rizoma product, please check that all related components of the motorbike function e.g. brakes, throttle, clutch, lights and steering. We strongly suggest to repeat these checks periodically, especially after long trips or prolonged periods of not using the bike.

Your RIZOMA products require regular inspection and maintenance. The more you ride the more often you must inspect your RIZOMA products. If your products are leaking, bent, deformed, cracked, chipped or worn, no matter how slight, immediately have a RIZOMA dealer inspect the products before you ride again. In any case never try to repair or modify the Rizoma products or their components, always replace with Rizoma original components.

Rizoma products may not be compatible with your motorcycle or with other aftermarket equipment installed before. For your safety Rizoma suggests to always contact your RIZOMA dealer.

O.E.M.: original equipment manufacturer.

License plate

PART NUMBER
PT315

– To comply with the TÜV and European Norm in force, the installation of the license plate must be carried out as the enclosed instructions.
Consult the website www.rizoma.com, in FOX license plate support section click “DOWNLOAD” to download the PDF document approval ABE.

1

| 2

---|---
R301                     2| EE062-01               1

– Before you start mounting the product please check the completeness of the kit on the part list. The difficulty level and the time of assemblage shown do not include the removal of OEM components. Warning:Make sure that your motorbike is standing firmly before you start work, as a fall may lead to damage to the motorbike or injury to you or others, also make sure that the temperature of the exhausts and the engine are similar to the ambient temperature. WARNING: TO CLEAN YOUR LICENSE PLATE DON’T USE DETERGENT, AGGRESSIVE PRODUCTS OR ABRASIVE SPONGE THAT CAN DAMAGE OR SCRATCH YOUR LICENSE PLATE, BUT USE ONLY NEUTRAL DETERGENT WITH COLD WATER.

– Improper installation could damage the electrical system of the motorcycle and cause a fire, resulting in personal injury or death. Electrical shock hazard. Disconnect the battery before starting to install turn license plate bracket or rear light or the turn signals. The pins must always be isolated and respect the polarity in the connections. The warrantee is not valid for any electric wires cutting or any product modify or tampering.

  8-10 mm|
---|---
2-3-4 mm| 8-10 mm
DIFFICULTY LEVEL                Simple
TIME OF ASSEMBLAGE           20-25 min

INSTALL SUPPORT

Step 1

1. OEM BRACKET TO INSERT THE ELECTRIC WIRINGS
2. SUPPORT

INSTALL PLATE FOR MEDIUM/LARGE LICENSE PLATE

Step 2

1. Warning: cut the support of reflector according to dimensions of license plate.
2. H= 3mm
3. H= 5mm

INSTALL PLATE FOR SMALL LICENSE PLATE

Step 3

1. Warning: cut the support of reflector according to dimensions of license plate.
2. H= 3mm

INSTALL UNIVERSAL LICENSE PLATE

Step 4

1. SCREW M6
2. GREASE
3.   WARNING: the pin of positioning must always be inside.
4. ELECTRIC WIRINGS
5. ADHESIVE CLIP
6. WARNING: INSERT THE PIN OF POSITIONING THE LICENSE PLATE FOLLOW THE EUROPEAN NORM IN FORCE.

INSTALL LICENSE PLATE ON OEM UNDER SEAT

– Before to fixing the complete license plate to chassis insert the electric wirings. (Fixing the license plate avoid to damage the electric wiring). To facilitate the adjustment of the license plate (STEP 13) do not complete tighten the nuts.

Step 5

1. ORIGINAL UNDERSEAT
2. SUPPORT
3. NYLON WASHERS
4. WASHERS
5. BRACKET FOR WIRINGS

INSERT ELECTRIC WIRINGS IN THE LICENSE PLATE

Step 6

1. HOUSING THE ELECTRIC WIRINGS
2. FIX THE WIRINGS TO THE BRACKET WITH THE TY-RAP
3.   TAKE CARE NOT TO PINCH THE WIRES

INSERT ELECTRIC WIRINGS IN OEM UNDER SEAT

Step 7

1. PLASTIC SUPPORT TO INSERT THE ELECTRIC WIRINGS
2. ELECTRIC WIRINGS HOLE
3. OEM UNDERSEAT

TAKE CARE NOT TO PINCH THE WIRES

INSTALL PIN OF POSITIONING

Step 8

1. WARNING: the pin of positioning must always be inside.

WARNING: INSERT THE PIN OF POSITIONING THE LICENSE PLATE FOLLOW THE EUROPEAN NORM IN FORCE.

INSTALL LICENSE PLATE

Step 9

ANGLE OF GEOMETRIC VISIBILITY (DIHEDRAL WITH HORIZONTAL EDGE)

ANGLE OF GEOMETRIC VISIBILITY (DIHEDRAL WITH PERCEPTIBLY VERTICAL EDGE)

INSTALL TURN SIGNALS

Step 10

1. LICENSE PLATE
2. MIN 180 mm
3. INDICATOR LIGHT (CE) APPROVED
4. REFLECT LIGHT
5. LIGHT LICENSE PLATE (CE) APPROVED

ADJUSTABLE REFLECTOR

Step 11

1. REFLECTOR
2. LICENSE PLATE LIGHT
3. UNDER SEAT
4. RESPECT THE DIRECTIVE THE REFLECTOR MUST BE PERPENDICULAR AT THE GROUND AXIS
5. WHEEL
6. GROUND AXIS

WARNING: ADJUST THE DISTANCE BETWEEN THE REFLECTOR AND THE REAR WHEEL TO AVOID ANY CONTACT, DURING THE MAXIMUM STROKE OF REAR SUSPENSION. THE REFLECTOR MUST BE POSITIONED MORE NEAR POSSIBLE AT THE LOWER OF THE LICENSE PLATE.

ADJUSTABLE LICENSE PLATE

Step 12

1. WARNING: BE SURE NOT DAMAGE THE ELECTRIC WIRINGS DURING ADJUST THE LICENSE PLATE FORWARD OR BACK TO MAKE THE RIGHT CLEARANCE BETWEEN THE REAR TYRE AND THE REFLECTOR DURING THE MAXIMUN STROKE OF REAR SOSPENSION AFTER TIGHTENING COMPLETE THE NUTS.

ELECTRIC WIRINGS

Step 13

WARNING: CONTROL THAT IS THE BATTERY DISCONNECT

1. BLACK WIRE
2. FURNISHED ELECTRIC WIRING
3. RED WIRE
4. LICENSE PLATE LIGHT

WARNING: FOR CORRECT INSTALLATION OF LICENSE PLATE LIGHT FOLLOW THESE STEPS: RESPECT THE POLARITY IN THE CONNECTIONS AND ALWAYS CHECK THAT THE TERMINALS ARE ISOLATED.

Warnings

– RIZOMA reserves the right, in its sole discretion, to make changes to the product and this information at any time and without prior notice. Although many catalogs and advertisements depict riders engaged in extreme or stunt riding, this activity is extremely dangerous, increases the risk of an accident, and increases the severity of any injury.

The action depicted is performed by professionals under strictly controlled riding conditions.

Only you know the limits of your riding ability and only you can control the conditions under which you ride. By and in consideration for his/her purchase and use of the RIZOMA product, the user expressly recognizes and agrees that in the event of any claim arising out of the use of this RIZOMA product, whether such claim is based in contract, warranty, tort (personal injury or wrongful death) or otherwise, the laws of the Republic of Italy shall apply and jurisdiction and venue for any such action shall be in the Courts of Busto Arsizio, Italy.

All riders are strongly urged to take a motorcycle rider safety clinic. Always wear a properly fitted and fastened motorcycle helmet (RIZOMA recommends a full face helmet), that has been approved by ANSI , SNELL, CE, or any other relevant authority, and any other safety equipment necessary for your riding style, such as full finger gloves, boots, and body armor.

Be sure to read and follow all the instructions and warnings that originally accompanied your motorcycle, as well as the literature that accompanied any other component parts installed on your motorcycle.

Be sure that your tires are inflated to the correct pressure and that there is no damage whatsoever in the tread or sidewall of the tire.

Legal note

– Some of our products may not be approved for road circulation in the countries where homologation is required. Thus RIZOMA® srl declines any responsibility for a different use of its products.

References

• Home - Rizoma

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>