EMOS ZD3122 LED Spotlight Instruction Manual
- June 8, 2024
- EMOS
Table of Contents
EMOS ZD3122 LED Spotlight
This luminaire is not suitable for covering with insulation material.
LED luminaire is designed for indoor use to be mounted on a solid base. Ingress Protection IP20 – for indoor use
Mounting
Mount the lamp firmly onto a solid basis, for example, a wall, a ceiling, and
like that. Connect the power cord to the mains 230 V AC. Connecting conductor
must not be connected to the mains at the time of installation. This operation
can be carried out only by an authorized person.
WARNING
- Luminaire is suitable entirely for fixed mounting.
- The luminaire can be connected only to the electric distribution network, whose installation and protection comply with the applicable standards.
- Before any manipulation or servicing of the luminaire disconnect the luminaire from AC power. This operation can be carried out only by an authorized person.
- In case of any damage to any part of the luminaire, don’t use it.
- LED chips inside the luminaire are not replaceable.
- Don’t change the inner wiring of the luminaire.
- In case of a broken cover don’t use the luminaire and re-place the broken cover with a new one immediately.
This product contains a light source of energy efficiency class F
Do not dispose of domestic waste. Use special collection points for sorted waste. Contact local authorities for information about collection points. If the electronic devices would be disposed on landfill, dangerous substances may reach groundwater and subsequently the food chain, where it could affect human health.
Service
EMOS SI, d.o.o., Rimska cesta 92, 3311 Šempeter in Savinjska dolina, Slovenia
phone: +386 8 205 17 21
e-mail: reklamacije@emos-si.si.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>