K RCHER Puzzi 10-1 Vacuum Cleaner Washing Instruction Manual

Puzzi 10-1 Vacuum Cleaner Washing
Instruction Manual Puzzi 10/1
Puzzi 10/2 Adv

Puzzi 10-1 Vacuum Cleaner Washing

Register your productwww.kaercher.com/welcome

General notes

Read these original instructions and the enclosed safety instructions before using the device for the first  time.Act in  accordance withthem. Keep both books for future reference or for future owners.

• If the operating instructions and safety instructions are not observed, the device can be damaged and dangers could arise for users and other persons.
• Notify the dealer immediately in the case of shipping damage.
• Check the package contents when unpacking for missing accessories or for damage.

Environmental protection

** The packing materials can be recycled. Please dispose of packaging in accordance with the environmental regulations.
Electrical and electronic appliances contain valuable, recyclable materials and often components such as batteries, rechargeable batteries or oil, which – if handled or disposed of incorrectly – can pose a potential threat to human health and the environment.
However, these components are required for the correct operation of the appliance. Appliances marked by this symbol are not allowed to be disposed of together with the
household rubbish.
Notes on the content materials (REACH)**
Current information on content materials can be found at: www.kaercher.com/REACH

Intended use

• This spray retraction device is intended for wet cleaning of carpets.
• This device is suitable for commercial use, e.g. in hotels, schools, hospitals, factories, shops, offices, and rental companies.

Overview of the device

Quick Start Guide
Illustration A

1. Connect the spray / suction hose to the device, connect the spray / suction hose to the angle piece
2. Mix cleaning solution, fill fresh water tank
3. Selecting operating modes
4. Cleaning
5. Emptying the fresh water tank
6. Empty the wastewater container
7. Fill the fresh water tank(without detergent), rinse the device
8. Clean the fluff filter, clean the fresh water filter
9. Allow the device to dry

Description of the device

Illustration B

1. Manual nozzle for upholstery cleaning (Puzzi 10/1 only)
2. Cable hooks
3. Adapter for accessories (Homebase)
4. Holder for accessories
5. Mains cable
6. Quick Start Guide
7. Fresh water tank
8. Fresh water filter
9. Spray switch
10. Suction switch
11. Casing
12. Type plate
13. Steering roller
14. Spray hose connection
15. Socket for additional brush wash head PW 30/1 (Puzzi 10/2 Adv only)
16. Suction hose connection
17. Defoaming agent container (Puzzi 10/2 Adv only)
18. Cover
19. Storage compartment for detergent tabs (Puzzi 10/2 Adv only)
20. Device carrying handle including suction pipe holder
21. Floor nozzle for carpet cleaning
22. Carpet adapter
23. Floor nozzle latch
24. Suction pipe
25. Nozzle mouthpiece
26. Union nut
27. Handle
28. Angle piece
29. Lever on the manifold
30. Spray hose
31. Suction hose
32. Spray / suction hose
33. Wastewater container, removable
34. Wastewater container carrying handle
35. Cover seal
36. Fluff filter

Start-up

1. Check the power cord, extension cable and hoses for damage before each start-up.

Installing accessories

1. Fit the suction pipe onto the floor nozzle and handtighten the union nut on the floor nozzle.
2. If necessary, slide the handle onto the suction pipe and hand-tighten in the desired position.
3. Fit the angle piece onto the suction pipe and handtighten the union nut on the angle piece.
4. Connect the suction hose to the suction hose connection on the device. Insert  the spray hose coupling into the spray hose connection on the device and latch into place.
5. Connect the suction hose to the angle piece. Connect the spray hose coupling to the angle piece and latch into place.

Mixing the cleaning solution
DANGER
Danger from detergents
Risk of injury and damage
Observe all instructions that are included with the detergents used.
Note Warm water (maximum 50 °C) increases the cleaning effect. Check the temperature resistance of the surface to be cleaned.
Note Use detergents sparingly to conserve the environment.
1. Mix fresh water and detergent in a clean container (concentration as specified for the detergent). Dissolve the detergent in the water.
Filling the fresh water tank

1. Pour the cleaning solution into the fresh water tank. The filling level must not exceed the “MAX” mark.

Defoaming agent
Note
Foam is generated in the wastewater container when cleaning previously shampooed carpets. Foaming can be prevented by adding defoaming agents.

1. Puzzi 10/1 only: Add defoaming agent (special accessory) to the wastewater container.
2. Puzzi 10/2 Adv only: Open the defoaming agent container. Fill with defoaming agent (special acces- sories).

Replacing the carpet adapter

1. Press the floor nozzle latch on one side.
2. Swing out and remove the carpet adapter.
3. Insert a new carpet adapter and engage the latch.

Operation

Working with accessories
Puzzi 10/2 Adv only:
Note
An additional power socket is provided for connecting additional electrical devices.
DANGER
Danger of electric shock
Risk of injury and damage.
The socket is only intended for the direct connection of the PW 30/1 additional brush washer head to the Puzzi 10/2 Adv. Any other use of the socket is prohibited.
Switching on the device

1. Connect the mains plug.
2. Press the suction switch to switch on the suction turbine.
3. Press the spray switch to switch on the spray pump.

Cleaning mode
ATTENTION
Danger from cleaning solution
Risk of damage
Before using the device, check the object to be cleaned for colour fastness and water resistance in an inconspicuous place.

1. Press the lever on the angle piece to spray the cleaning solution.
2. Run over the surface to be cleaned in overlapping paths. Pull the nozzle backwards (do not push).
3. When work is interrupted, the floor nozzle can placed in the device carrying handle.

Switching off the device

1. Switch off the spray switch and the suction switch.
2. Pull out the mains plug.

Empty the wastewater container

1. Switch off the suction switch and the spray switch when the wastewater container is full.
2. Remove the cover.
3. Remove the wastewater container from the device and empty it.

Emptying the fresh water tank

1. Switch off the device.
2. Briefly operate the lever on the angle piece to relieve pressure.
3. Disconnect the angle piece from the spray / suction hose.
4. Hang the suction hose in the fresh water tank.
5. Press the suction switch to switch on the suction turbine.
6. Suck the fresh water tank empty and switch off the device.
7. Remove the cover.
8. Remove the wastewater container from the device and empty it.

Flushing the device

1. Connect the angle piece (with suction pipe and floor nozzle) to the suction hose.
2. Connect the spray hose coupling to the angle piece and latch into place.
3. Pour approximately 2 litres of tap water into the fresh water tank. Do not add detergents.
4. Press the spray switch to switch on the spray pump.
5. Hold the floor nozzle over a drain.
6. Operate the lever on the angle piece and flush the device for 1 to 2 minutes.
7. Switch off the device.

Each time after use

1. Flush the device.
2. Drain the wastewater container and clean it under running water.
3. Empty the fresh water tank.
4. Clean the exterior of the device with a damp cloth.
5. To avoid unpleasant smells, remove all water from the device before long downtimes.
6. Let the device dry thoroughly: Remove the cover or move it to the side.

Storing the device

1. Store the device in a dry room and secure it against unauthorised use.

Cleaning methods

Normal soiling

1. Spray and vacuum up the cleaning solution in one step.

Note
Repeated vacuuming without spraying shortens the drying time.
Heavily soiling or stains

1. Apply cleaning solution with the suction turbine switched off and let it work for 10 to 15 minutes.
2. Clean the area as with normal soiling.

Upholstery cleaning

1. Puzzi 10/1 only: Fit the manual nozzle instead of the floor nozzle.
2. Use less detergent for sensitive fabrics and spray the surface at a distance of approx. 200 mm. Then only vacuum.

Cleaning tips

• Spray heavily soiled areas in advance and allow the cleaning solution to work for 5 to 10 minutes.
• Always work from light to shadow (from window to door).
• Always work from the cleaned to the uncleaned area.
• The more sensitive the covering (oriental bridges, Berber, upholstery fabric) the lower the concentration of detergent.
• Carpets with jute backs can shrink and bleed in colour if the work is too wet.
• Brush wet pile carpets in the direction of the pile after cleaning when wet (e.g. with a fibre brush or scrubber).
• Impregnating after wet cleaning prevents the textile from being quickly soiled again.
• To avoid pressure points or rust stains, do not walk on or furnish the cleaned area until after it has fully dried.
• To improve the cleaning result, rinse the object with clean water after using detergents.

Detergent

6.295-850.0
CarpetPro clean- er, quick-drying (10 litre)| RM 767 liq- uid| 1.%| 6.295-198.0
CarpetPro clean- er (10 litres)| RM 764 liq- uid| 1%| 6.295-854.0
CarpetPro im- pregnation (5 li- tres)| RM 762 liq- uid| 20%| 6.295-852.0
Defoaming (2.5 li- tres)| RM 761 liq- uid| 0.5%| 6.291-389.0

For further information, please request the product information sheet and the EU safety data sheet for the relevant cleaning agent.

Transport

CAUTION
Failure to observe the weight
Risk of injury and damage
Be aware of the weight of the device during transportation.

1. Place the suction pipe on the carrying handle for transport and place the spray / suction hose on the device. Wind up the mains cable and hang it in the cable hook.
   Illustration C

2. When transporting the device in vehicles, secure it to prevent it from slipping or overturning in accordance with the respective valid guidelines.

Storage
CAUTION
Failure to observe the weight
Risk of injury and damage
Be aware of the weight of the device during storage.
The device may only be operated indoors.

Care and service

DANGER
Danger of electric shock
Injuries due to touching live parts
Switch off the device.
Remove the mains plug.
Clean the fluff filter

1. Remove the cover.
2. Remove the wastewater container from the device.
3. Clean the fluff filter regularly with a brush.

Clean the fresh water filter

1. Unscrew the fresh water filter.
2. Clean the fresh water filter under running water.

Clean the nozzle

1. Unscrew the union nut.
2. Clean the nozzle mouthpiece.

Troubleshooting guide

DANGER
Danger of electric shock
Injuries due to touching live parts
Switch off the device.
Remove the mains plug.
The device is not working

1. Check the socket and the power supply fuse.
2. Check the mains cable and the mains plug of the device.
3. Switch on the device.

No water emitted from the nozzle

1. Fill up the fresh water tank.
2. Check the couplings on the spray hose for correct seating.
3. Clean or replace the nozzle mouthpiece.
4. Clean the fresh water filter.
5. Spray pump defective, contact customer service.

Single-sided spray jet

1. Clean the nozzle mouthpiece.

Poor suction performance

1. Check that the cover is seated correctly.
2. Clean the seal on the cover and the contact surface on the device.
3. Clean the fluff filter.
4. Check the suction hose for clogging; clean if necessary.

Spray pump is loud

1. Refill the fresh water tank.

Heavy foaming in the wastewater container

1. Add defoaming agent in the wastewater container or fill up the defoaming agent container.

Customer Service department
If the malfunction cannot be corrected, the device must be checked by the Customer Service department.

Warranty

The warranty conditions issued by our relevant sales company apply in all countries. We shall remedy possible malfunctions on your appliance within the warranty period free
of cost, provided that a material or manufacturing defect is the cause. In a warranty case, please contact your dealer (with the purchase receipt) or the next authorised customer service site. (See overleaf for the address)

Accessories and spare parts

Only use original accessories and original spare parts.
They ensure that the appliance will run fault-free and safely.
Information on accessories and spare parts can be found at www.kaercher.com.

Declaration of Conformity

EU Declaration of Conformity
We hereby declare that the machine described below complies with the relevant basic safety and health requirements in the EU Directives, both in its basic design and construction as well as in the version placed in circulation by us. This declaration is invalidated by any changes made to the  machinethat are not approved by us.
Product: Spray retraction device
Type: 1.100-xxx
Type: 1.193-xxx
Currently applicable EU Directives
2006/42/EC (+2009/127/EC)
2011/65/EU
2014/30/EU
Harmonised standards used
EN IEC 63000: 2018
EN 55014-1: 2017 + A11: 2020
EN 55014-2: 2015
EN 60335-1
EN 60335-2-68
EN 61000-3-2: 2014
EN 61000-3-3: 2013
EN 62233: 2008
National standards used
The signatories act on behalf of and with the authority of the company management.Documentation supervisor: S. Reiser
Alfred Kärcher SE & Co. KG
Alfred-Kärcher-Str. 28 – 40
71364 Winnenden (Germany)
Ph.: +49 7195 14-0
Fax: +49 7195 14-2212
Winnenden, 2020/10/01
Declaration of Conformity (UK)
We hereby declare that the product described below complies with the relevant provisions of the following UK Regulations, both in its basic design and construc- tion as well as in the version put into circulation by us. This declaration shall cease to be valid if the product is modified without our prior approval.
Product: Spray retraction device
Type: 1.100-xxx
Type: 1.193-xxx
Currently applicable UK Regulations
S.I. 2008/1597 (as amended)
S.I. 2012/3032 (as amended)
S.I. 2016/1091 (as amended)
Designated standards used
EN IEC 63000: 2018
EN 55014-1: 2017 + A11: 2020
EN 55014-2: 2015
EN 60335-1
EN 60335-2-68
EN 61000-3-2: 2014
EN 61000-3-3: 2013
EN 62233: 2008
National standards used
The signatories act on behalf of and with the authority of the company management.Documentation supervisor:
S. Reiser
Alfred Kärcher SE & Co. KG
Alfred-Kärcher-Str. 28 – 40
71364 Winnenden (Germany)
Ph.: +49 7195 14-0
Fax: +49 7195 14-2212
Winnenden, 2020/10/01

Technical data

| | Puzzi 10/1| Puzzl 10/2 Adv
---|---|---|---
Electrical connection| | |
Mains voltage| V| 220-240| 220-240
Mains voltage (AU)| V| 240| 240
Mains voltage (AR)| V| 220| 220
Phase| –| 1| 1
Power frequency| Hz| 50-60| 50-60
Degree of protection| | IPX4| IPX4
Protection class| | II| II
Blower motor nominal power| W| 1200| 1200
Power (tot.)| W| | 1450
Spray pump power| W| 40| 80
Power rating of the device socket (max.)| W| | 250
Device performance data| | |
Fresh water filling quantity| I| 10| 10
Wastewater filling quantity| I| 9| 9
Air quantity (max.)| I/s| 74| 74
Vacuum (max.)| kPa (mbar| 25.4 (254)| 25.4 (254)
Spray pressure| MPa| 0.1| 0.2
Spray pressure (max.)| MPa| 0.3| 0.3
Spray volume| l/min| 1| 2
Cleaning solution temperature (max.)| °C| 50| 50
Dimensions and weights| | |
Typical operating weight| kg| 11.| 11.0
Length x width x height| mm| 705 x 320 x 435| 705 x 320 x 435
Ambient conditions| | |
Ambient temperature (max.)| -C| +40| +40
Determined values In acc. with EN 60335-248| | |
Sound pressure level L0,| dB(A)| 71| 71
Uncertainty 1<pik| dB(A)| |
Hand-arm vibration value| rn/s2| <2.5| <2.5
Uncertainty K| rn/s2| 0.2| 0.2
Mains cable| | |
Power cord type| mm4| HO5VV-F 2×1.0| HO5VV-F 2×1.0
Part number (EU)| | 6.650-363.0| 6.650-363.0
Part number (GB)| | 6.650-380.0| 6.650-380.0
Part number (AU)| | 6.650-385.0| 6.650-385.0
Part number (AR)| | 6.650-382.0| 6.650-382.0
Cable length| m| 8.| 8.

Accessories

DN = Konus-Verbindung, cone connection, connexion de cône

• = nur Puzzi 10/2 Adv, Puzzi 10/2 Adv only, uniquement Puzzi 10/2 Adv

THANK YOU!
Register your product and benefit from many advantages.
www.kaercher.com/welcome
Rate your product and tell us your opinion.

www.kaercher.com/dealersearch
Alfred Karcher SE & Co. KG
Alfred-Karcher-Str. 28-40 71364
Winnenden (Germany)
Tel.: -1-49 7195 14-0
Fax: +49 7195 14-2212

References

• Cleaning equipment and pressure washers | Kärcher International
• Cleaning equipment and pressure washers | Kärcher International
• Dealer Search | Kärcher International
• Home and Garden Warranty Registration USA - Kärcher

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>