RUGGED RIDGE TJ-LJ Dash Multi Mount Phone Kit Installation Guide
- June 13, 2024
- RUGGED RIDGE
Table of Contents
RUGGED RIDGE TJ-LJ Dash Multi-Mount Phone Kit
Product Information
The Dash Multi-Mount Phone Kit, TJ/LJ is a versatile accessory designed for mounting phones and other devices in a vehicle’s dash recess. It includes several components to securely hold and mount your phone or other accessories.
- Multi-Mount Tray (1): Provides a stable base for mounting accessories.
- Universal Ball Mount (1): Attaches to the Multi-Mount Tray and allows for the attachment of various accessories.
- Cap Piece (1): Covers the end of the Ball Mount for added protection and stability.
- Self-Tapping Screw (3): Used to secure the Multi-Mount Tray in the dash recess.
Product Usage Instructions
- Remove all items and clean the vehicle’s dash recess.
- Test fit the Multi-Mount Tray in the dash recess. Ensure that it sits at the rear-most wall of the recess.
- Remove the backing of the adhesive tape and place the Multi-Mount Tray into the dash recess.
- Install three Self-Tapping Screws through the Multi-Mount Tray into the dash recess of the vehicle. Begin with the front-most screw.
- To mount a phone or GPS device:
- Place the Outer Ring over the end of the Ball Mount.
- Press the Phone Mount adapter piece into the Ball Mount.
- Pull the Outer Ring over the Phone Mount adapter and twist it to secure it.
Note: The Dash Multi-Mount System offers four configurations:
- No Accessory
- Phone/GPS Mount Only*
- Camera/Tripod Mount Only
- Phone and Camera Mount*
Please choose the appropriate configuration based on your needs.
For warranty information and further assistance, please visit the official website: www.Omix-Ada.com.
DASH MULTI-MOUNT PHONE KIT, TJ/LJ
Components
- Multi-Mount Tray (1)
- Universal Ball Mount (1)
- Cap Piece (1)
- Self-Tapping Screw (3)
INSTRUCTIONS
- Remove all items and clean the vehicle dash recess.
- Test fit Multi-Mount Tray in dash recess. Multi-Mount Tray will sit at the rear-most wall of the dash recess.
- Remove the backing of adhesive tape and place the Multi-Mount tray into the dash recess.
- Install three Self-Tapping Screws through Mutli-Mount Tray into the dash recess in the vehicle, beginning with front-most Self-Tapping Screw.
HOW TO FIX
- Place the Outer Ring over the end of the Ball Mount.
- Press the Phone Mount adapter piece into the Ball Mount.
- Pull Othe uter Ring over the Phone Mount adapter and twist it to secure it.
Four Configurations for Dash Multi-Mount System:
- No Accessory
- Phone/GPS Mount Only*
- Camera/Tripod Mount Only
- Phone and Camera Mount*
460 HORIZON DR. SUITE 400 SUWANEE, GA 30024 PHONE : 770-614-6101 FAX : 770-614-6069 info@omix- ada.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>