AT T 5HUB-PD Portable USB Charge Station User Guide
- June 8, 2024
- AT&T
Table of Contents
AT T 5HUB-PD Portable USB Charge Station
Welcome
Thank you for purchasing AT&T 5HUB-PD!
Please read this quick start guide before using the device to ensure safe and proper use.
Features
- Convenient multiport charging station
- Charge up to 5 devices simultaneously
- Bracket included to minimize desk footprint and hold the charging station in position with easy access to ports
- One 21W USB 3.0 port and one 24W PD port
- 3 Smart USB A ports share another 15W, 5V 2.4 max for each Smart USB A port
- Superior safety features including temperature control, overvoltage protection, short-circuit protection and overcharge protection
What’s included
Product Appearance
Put the charger into base holder
Remove the charger and charging base from the box. Place the charger base on a
flat surface to make sure the charger is properly seated.
Connect charger with AC power source
Remove the AC charging cable from box. Plug the AC prongs into an outlet and
the other end into the AC input port Charging your devices (5-Port
Charging,Smart Share)
Now you can charge multiple devices simultaneously
Note: Puts out up to 60W of power when 5 devices are connected,PD port
max 24W and QC 3.0 max 21W.
3 Smart USB A ports share another 15 Watts, 5V 2.4 max for each Smart USB A
port.
Specifications
Important Safety Instructions
-
Always clean the unit using a dry cloth, do not use liquids or any cleaners.
-
Do not use attachments not recommended by the manufacturer.
-
The unit should not be used near water. For example: near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a wet basement.
-
The unit should be situated away from heat sources such as radiators, heat registers, stoves or other appliances (including amplifiers) that produce heat.
-
Do not place the unit on an unstable table, stand, tripod, or bracket.
This may result in serious personal injuries and damage to the unit. -
If the unit is to be left unused for an extended period oft ime, such as a month or longer, the power cable should be unplugged from the unit to prevent damage or corrosion.
-
Do not attempt to disassemble. To prevent injury or damage to product, any repairs should be made by professionals.
1 YEAR LIMITED WARRANTY
The AT&T brands are used under license. Any repair, replacement, or warranty service,and all questions about this product should be directed to Concept 101 LLC at www.att.com/electronics or call 1(888) 920-8680 from the USA or Canada. Concept 101 LLC warrants that the product will be free from defects in material, parts and workmanship for the period of one (1) year from date of purchase. Concept 101 LLC agrees that it will,at its option, replace the defective product with either a new or remanufactured product equivalent to your original purchase during the warranty period. Please be advised the returned product must carry the proof of purchase.
Compliance with FCC Regulations
The equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/television technician for assistance.
© 2021 Concept 101 LLC. All Rights Reserved. AT&T and the AT&T logo are trademarks of AT&T Intellectual Property licensed to Concept 101 LLC, New York, New York 10018. Printed in China. Issue 1.1 AT&T 08/2021.
The ‘Quick Charge’ icon and Quick ChargeM are registered trademarks of Qualcomnm Technologies, Inc. Other trademarks and trade names are those of their respective owners.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>