rizoma PT668 Adjustable License Plate Kit User Manual
- June 8, 2024
- rizoma
Table of Contents
- rizoma PT668 Adjustable License Plate Kit
- Instruction
- REMOVE ORIGINAL LICENSE PLATE
- INSTALL M6X60 SCREW
- INSTALL STICKER
- INSTALL BRACKETS
- INSTALL BUSHINGS AND RUBBERS
- INSTALL SPACER
- INSTALL BRACKETS ON CHASSIS
- TIGHTEN SCREWS
- INSERT WIRING
- ADJUSTMENT REFLECTOR
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
rizoma PT668 Adjustable License Plate Kit
Instruction
Before you start
We are pleased to welcome you into the world of RIZOMA, and we congratulate
you for your excellent choice. Please carefully follow the instructions in
this guide, which will allow you to mount and use the product correctly and
enjoy all the features it has.
For your protection and safety, RIZOMA expressly recommends that you have the
installation of the product performed by skilled personnel. Improper
installation, repair or maintenance, can cause accidents. Keep this user guide
as a reference for the future.
To comply with the TÜV and European Norm in force, the installation of the license plate must be carried out as the enclosed instructions. Consult the website www.rizoma.com, in FOX license plate support section click “DOWNLOAD” to download the PDF document approval ABE.
Before you start mounting the product please check the completeness of the kit
on the part list. The difficulty level and the time of assemblage shown do not
include the removal of OEM components. Warning: Make sure that your motorbike
is standing firmly before you start work, as a fall may lead to damage to the
motorbike or injury to you or others, also make sure that the temperature of
the exhausts and the engine are similar to the ambient temperature.
WARNING: TO CLEAN YOUR LICENSE PLATE DON’T USE DETERGENT, AGGRESSIVE
PRODUCTS OR ABRASIVE SPONGE THAT CAN DAMAGE OR SCRATCH YOUR LICENSE PLATE, BUT
USE ONLY NEUTRAL DETERGENT WITH COLD WATER.
Improper installation could damage the electrical system of the motorcycle and cause a fire, resulting in personal injury or death. Electrical shock hazard. Disconnect the battery before starting to install turn license plate bracket or rear light or the turn signals. The pins must always be isolated and respect the polarity in the connections. The warrantee is not valid for any electric wires cutting or any product modify or tampering.
REMOVE ORIGINAL LICENSE PLATE
INSTALL M6X60 SCREW
INSTALL STICKER
INSTALL BRACKETS
INSTALL BUSHINGS AND RUBBERS
INSTALL SPACER
INSTALL BRACKETS ON CHASSIS
TIGHTEN SCREWS
INSTALL PLATE FOR MEDIUM/LARGE LICENSE PLATE
INSTALL UNIVERSAL LICENSE PLATE
INSTALL PIN OF POSITIONING
INSTALL LICENSE PLATE
INSERT WIRING
ADJUSTMENT REFLECTOR
CONNECTIONS
RIZOMA reserves the right, in its sole discretion, to make changes to the
product and this information at any time and without prior notice. Although
many catalogs and advertisements depict riders engaged in extreme or stunt
riding, this activity is extremely dangerous, increases the risk of an
accident, and increases the severity of any injury.
The action depicted is performed by professionals under strictly controlled
riding conditions.
Only you know the limits of your riding ability and only you can control the
conditions under which you ride. By and in consideration for his/her purchase
and use of the RIZOMA product, the user expressly recognizes and agrees that
in the event of any claim arising out of the use of this RIZOMA product,
whether such claim is based in contract, warranty, tort (personal injury or
wrongful death) or otherwise, the laws of the Republic of Italy shall apply
and jurisdiction and venue for any such action shall be in the Courts of Busto
Arsizio, Italy.
All riders are strongly urged to take a motorcycle rider safety clinic. Always
wear a properly fitted and fastened motorcycle helmet (RIZOMA recommends a
full face helmet), that has been approved by ANSI , SNELL, CE, or any other
relevant authority, and any other safety equipment necessary for your riding
style, such as full finger gloves, boots, and body armor.
Be sure to read and follow all the instructions and warnings that originally
accompanied your motorcycle, as well as the literature that accompanied any
other component parts installed on your motorcycle.
Be sure that your tires are inflated to the correct pressure and that there is
no damage whatsoever in the tread or sidewall of the tire.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>