allen roth 46320WPDLG 5-Hook 27.01-in x 11.77-in H Tabacco Decorative Wall Hook Installation Guide
- June 8, 2024
- Allen+Roth
Table of Contents
- allen roth 46320WPDLG 5-Hook 27.01-in x 11.77-in H Tabacco Decorative
- TROUBLESHOOTING
- PREPARATION
- TOOLS REQUIRED
- FEELING CONFIDENT? START YOUR NEXT PROJECT
- CARE AND MAINTENANCE
- SAFETY INFORMATION
- PACKAGE CONTENTS
- HARDWARE CONTENTS
- HARDWARE CONTENTS
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
allen roth 46320WPDLG 5-Hook 27.01-in x 11.77-in H Tabacco Decorative
Wall Hook
Thank you for purchasing this allen + roth brand product. We’ve created these
easy-to-follow instructions to ensure you spend your time enjoying the product
instead of putting it together. But, if you need more information than what is
provided here, please visit Lowes.com, search the item number and refer to the
Guides & Documents tab on the product’s page.
If the item is no longer for sale, or if you have any questions or problems,
please call our customer service department at
866-439-9800, 8 a.m. – 8 p.m., EST,
Monday – Sunday. You could also contact us at
[email protected] or visit
www.lowespartsplus.com.
TROUBLESHOOTING
| PROBLEM | POSSIBLE CAUSE | CORRECTIVE ACTION |
|---|---|---|
| Rail not level. | Original measurements are inaccurate. | Re-install starting |
with level marks.
PREPARATION
- Before beginning installation of product, make sure all parts are present. Compare parts with package contents list diagram above. If any part is missing or damaged, do not attempt to install the product.
- Estimated Assembly Time: 10 minutes
- Tools Required for Assembly (not included): Drill with 3/32 in. and 5/16 in. drill bits, Phillips screwdriver
- Helpful Tools (not included): Level, Pencil
TOOLS REQUIRED
FEELING CONFIDENT? START YOUR NEXT PROJECT
Visit Lowes.com for more information.
CARE AND MAINTENANCE
On an annual basis, it is recommended to double check all connections and re- tighten all screws and anchors. Clean with a lightly damp cloth or towel using water only to protect the durability of the finish on hooks and the rail.
SAFETY INFORMATION
- Please read and understand this entire manual before attempting to assemble, operate or install the product.
- Holds up to 35 lb on hook rail, evenly distributed
- When drilling into the wall, avoid any electrical wiring or plumbing that may be located behind the wall. Damaged electrical wiring can cause electrical shock and/or fire.
PACKAGE CONTENTS
HARDWARE CONTENTS
HARDWARE CONTENTS
- Temporarily place rail (A) in desired location and mark mounting hole locations.
- For solid wood/wood stud installations, remove rail (A) and drill 3/32 in. pilot holes at marks.
- For drywall installations, remove rail (A) and drill 5/16 in. pilot holes at marks. Place anchors (BB) into holes.
- For all other installation types, note different hardware (not included) might be needed. Follow manufacturer’s instructions.
- Secure rail (A) to mounting surface with screws (AA). Optional: Place hole covers (CC) into the screw holes on rail (A) to cover screw.
