Zigbee RCS3 Contact Sensor User Manual
- June 8, 2024
- zigbee
Table of Contents
Zigbee RCS3 Contact Sensor Introduction
- The door/window sensor detects the opening or closing of doors
- Windows, combined with other equipment to achieve intelligent application scenes.
- Make sure the door magnetic widget is on the side of the alignment sign
Specification
Connect Preparation
Connect your phone to WIFI-Smart Phone
WIFI Wireless Router Smart Host LAN Interface LAN Interface
- Ensure that the product is within effective coverage of the smart host(Gateway) ZigBee network to ensure that the product is effectively connected to the smart host(Gateway) ZigBee network.
- Make sure the gateway is added.
Please scan the QR code or search “Treatlife” on the Apple
APP Store/ Google Play to download the APP
Registration or Log In
- Download the”Treat Life”Application.
- Enter the Register/Login interface; Tap Register” to create an account by entering your Email Address to get verification code and “Set password”. Choose “Log in’if you already have a Treatlife account.
Network Settings
- Power the device on and ensure that the mobile phone has been connected to the network and has successfully added the smart gateway;
- Open the Treatlife app, on the “smart Hub” page, click “Add subdevice” button and select “Contact Sensor” on the “Select Device Type” page
- Using the reset needle, press and hold reset button for more than 5s until the network indicator flashes. Add the device according to the APP instructions.
- Once added, you can find the device in “My Home” list.
Packing List
- Door/Window Sensor *1
- Back Gum Paste *1
- Battery *1
- Reset Needle *1
- Product user manual *1
Please read the user manual carefully before using the product.
FCC Caution
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, ifnot installed and used in accordance
with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation
- If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>