Tidoin FYC-YDW9-098 Electric Folding Treadmill User Manual

Tidoin FYC-YDW9-098 Electric Folding Treadmill

Caution

To avoid any injuries, please read this manual carefully before using.

• For safety purposes do not stand on running belt when starting the machine.
• Please stop using immediately at the first sign of nausea.
• Please increase speed slowly if needed.
• Do not stand on belt while adjusting.
• It is recommended to wear athletic shoes when using the machine.
• Children, elderly, pregnant women, patients recovering from injuries or surgery are prohibited to use the machine.
• Please clip the safety key on your clothing during use.
• Please firmly hold the rail bars during using.

Safety Notice

• Please put the machine on flat ground. It is unsuitable to put the machine at following places:
  1. Outdoors.(The machine is specially designed for indoor use only)
  2. Slanted ground or slanted places on balcony.
  3. Sunlight area or near a heater/fireplace.
  4. Big noisy places.
• Errors may appear if the power supply is not stable. Please do not use the same socket together with computers, air conditioners, etc.
• It is suggested to wear athletic shoes clothing when using the machine.
• Please increase or decrease speed slowly.
• Be careful of children or other objects while folding and unfolding the machine.
• Do not put the machine near wet objects. Errors may occur if item gets wet.

Caution During Use

• If you do not feel well before using, please consult with your doctor or coach.
• Our company is not responsible for any injuries as a result of improper use
• Please unplug after using.
• Please unplug when moving the machine or changing parts.
• Children, elderly, and pregnant women are prohibited from using the machine. Patients should consult their doctor before using.
• Please place the machine on a flat surface. Do not place any objects 2M behind the machine.
• Do not start the machine when it is folded.
• Keep water away from the machine, motor, power line, and plug.
• Do not use this machine in enclosed spaces or areas without air circulation.
• Do not place any objects on the machine.
• Keep plug away from hot locations or fireplaces.
• Please turn off machine and unplug after using.
• Please do not stand directly on the belt while starting the machine.
• Do not disassemble the machine without professional supervision.
• Please make sure the running belt is fastened before using.

Technical Specification

Assembly Instructions

• Step 1:
  Take out the machine from the box, unscrew the adjusting knob on both sides of the frame respectively(suggest unscrewing 3 circles).

• Step 2:
  Uplift the handlebar to the slot corresponding to the hinge of main frame and then screw the knob.

• Step 3:
  Put on the safety key. Finish the assembly.

Display Monitor

Display

• “TIME” window has two modes that show the running time. ①Forward counting time is from 0:00 to 99:59 minutes. ②Countdown is count to 0 from the set time(setting range: 5:00~99:00 minutes). The machine will stop slowly when it counts to 0:00 and shows” end”, then the machine will come to standby mode after 5 seconds.
  “STEP ”window shows the steps. It counts from 0 to 9999 steps. It will recount when the step numbers reaches the top point.
  Note: The window will be switched from TIME and STEP cyclically, you can press“ M” button to switch between cyclic display mode and single display mode in motion state.

• “DISTANCE” window has two modes that show the current movement distance. ①In the forward counting mode, the distance will be increased from 0.0 to 99.9 miles, it will recount if the distance reaches the top point. ②In the distance countdown mode, the distance will be decreased from the setting data(setting range:1.00~99.00miles) to 0 . The machine will stop slowly when it counts to 0:00 and shows” end”, then the machine will come to the standby mode after 5 seconds. “CALORIES” window has two modes that show the calories. ①Forward mode counts from 0 to 9999, it will recount when it reaches the top point. ②countdown mode will count from setting calorie data( setting ranges 20~990) to 0. The machine will stop slowly when it counts to 0:00 and shows” end”, then the machine will come to standby mode after 5 seconds.
  Note: The window will be switched from DISTANCE and CALORIES cyclically, you can press“ M” button to switch between cyclic display mode and single display mode in motion state.

• “SPEED” window shows the current running speed, the setting range is 0.5MPH~6.5MPH. The speed will +/- 0.1MPH every time you click “+/-” button. P1 ~ P12 are displayed under the setting of automatic selection.

• After the treadmill is started, every window will be displayed cyclically at an interval of 5 seconds. You can press the “M” button to switch between cyclic display mode and single display mode.

• The maximum speed of the treadmill will be limited to 4MPH when the dashboard is deflected from a horizontal direction to an arbitrary direction by more than 60 degrees.

Function Of The Remote Control

• “Start/Stop”:
  1. In standby or countdown mode: Pressing power button to start the machine. Please note that the default speed is 0.5MPH.
  2. Choose the preset program: Pressing “ ” to start the machine and the speed will change according to the preset speed.
  3. In running state: Pressing power button, then the treadmill will stop slowly and back to standby state.
• “+”“-” Button is to adjust speed. Keep pressing “+”/“-” over 0.5 seconds, the speed will keep increasing or decreasing. Please note the speed will change by 0.1MPH.
• “M”:①In standby mode: it can switch from different mode, including Time, Distance and Calories. ②In running mode: press ”M” button will switch display mode between cyclic display mode and single display mode.
• “P”: There are P01~P12, totally 12 preset programs you can choose when in standby mode.

Functional Instruction

1. Sports mode: Press “start” key to start the machine and the SPEED window will count from“3 2 1 ”. Please note that the default speed is 0.5MPH and you can press“+”“-” to adjust speed.
2. Countdown mode: when in standby, press“M” key to choose countdown for time, distance and calories. Press “+”“-” to set relevant data. After setting, press“start/stop” to start the treadmill, it will count down from the set data, the machine will stop by itself when it counts to 0.
3. Preset program(P01~P12): choose one program first and then press “+”“-” to set the running time(ranges 5:00~99:00, and the default time is 30:00), press “start/stop” to start the machine, it will run according to the preset speed and speed will change according to the time ”(Time/20)”.

How To Match A New Remote Control

1. Power of the treadmill
2. Press the “speed -” in the machine and ”M” button in the remote control at the same time, keep pressing for 6 seconds.
3. Power on the treadmill within 5 seconds, the remote control will match the machine automatically

Dashboard

1. ”Start” button
   In standby /countdown mode, press the button to start the treadmill. The default speed is 0.5MPH. In preset mode, press the button, the treadmill will start and act according to the preset value and accumulate the data.

2. “Stop” button
   In the running state, press this button to stop the exercise and return to standby mode. Press the stop button for more than 2 seconds, the system restarts.

3. “Up/Down” button
   It is used to adjust the speed after start up, and the adjustment range is (0.1 MPH) / time. Keep pressing for more than 0.5 seconds, it will continuously increase or decrease. It also can be used to adjust the setting value in the setting state.

4. “Program” button
   To select 12 preset automatic programs P01 ~ P12.

5. “Mode” button
   To switch between various modes in standby mode. Including time countdown (setting range 5: 00 ~ 99: 00), distance countdown (setting range 1 mile ~ 99 miles), calorie countdown (setting range 20 ~ 990). After the treadmill is started, every window will be displayed cyclically at an interval of 5 seconds. You can press the “M” button to switch between cyclic display mode and single display mode.

6. ”SAFETY KEY” button
   In case of emergency, please pull off safety key at once to cut of power instantly.

Fold And Unfold

Fold：
Unscrew the knobs, and lay the handlebar down clockwise. Then screw the knobs to the frame.

Unfold：
Loosen the knob and uplift the handlebar anticlockwise to a certain angle, then tighten the knobs.

Usage Of Silicone Oil

Pull up tightly of the running belt. Then apply the silicone oil to the running board. Start the machine and let it run for 3 minutes without using. It is recommended to do this after every 30 hours of use with 1/3 bottle. It will extend the lifetime of the running belt.

Belt Adjustment

1. The running belt deviates to left
   Start the machine with speed of 1-2MPH (Don’t stand on the machine). Use the Allen wrench to turn the screw clockwise until desired fitted (see fig1). Then let the machine r un
   without loading for 1-2 minutes. Please adjust like this until the belt is in the middle.

2. The running belt deviates to right
   Start the machine at speed 1-2MPH (Don’t stand on the machine). Use the Allen wrench to turn the screw counterclockwise until desired fitted (see fig2). Then let the machine run without loading for 1-2 minutes. Please adjust like this until the belt is in the middle.

3. Running belt stuck
   If the running belt is not moving, use the Allen wrench to turn the screws 180 degrees on both left and right sides until this is solved (see fig3).

Daily Maintenance

1. Please switch off and unplug from power outlet before checking the machine or clearance.
2. Clean belt and dial plate after use, once every week at least.
3. Do not hang up clothes, etc. on the machine.

Trouble Shooting

Error

Code

| Meaning| Problem| Solution
---|---|---|---
Err(or E00)| No Safety key on Panel| The safety key is not on the panel or it is not properly put on| 1.  Put safety key in the yellow area of the panel

2.  Err(or E00) still shows or there is no function, change the computer screen/display monitor.

E2| Control Board Error| Control board is

broken or pseudo soldering on the control board

| Replace control board
E4| Control Board Error| The Control board is broken| Replace control board
E5| Over current Protection| Control board short circuit or motor blocked| 1. Open the motor cover and check whether the motor is blocked. Remove the block if yes.

2.  Replace the control board if it’s not blocked, or the error still shows.

E6| Motor Error| Motor broke or

motor line fall off

| 1.  Open the motor cover and check

whether the motor is broken or whether the motor wire is connected to the control board properly. Reconnecting the wire is recommended.

2.  Replace the control board if the error still shows.

E7| Communication Failures| Wires from the control board to panel board are broken or not properly connected| 1.  Make sure the wires from the control board and panel board are connected securely and not damaged.

2.  Replace the control board if the error still shows.

E8| Overload Protection| Excess of electricity or user exceeded max load weight| 1.  Make sure the user does not exceed max weight capacity.

2.  Reconnect power and re-start the machine.

3.  Replace the control board if the error code still shows.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>