GAGGENAU VG 232 .20 Gas Cooktop Instruction Manual
- June 5, 2024
- Gaggenau
Table of Contents
- GAGGENAU VG 232 .20 Gas Cooktop
- Intended use
- Important safety information
- Causes of damage
- Environmental protection
- Familiarising yourself with your appliance
- Operating the appliance
- Table of settings and tips
- Information and tips regarding cookware
- Precautions for use
- Cleaning and maintenance
- Troubleshooting
- After-sales service
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
GAGGENAU VG 232 .20 Gas Cooktop
Intended use
- Read these instructions carefully. Only then
- will you be able to operate your appliance safely and correctly. Retain the instruction manual and installation instructions for future use or for subsequent owners.
- This appliance is only intended to be fully fitted in a kitchen. Observe the special installation instructions.
- This appliance must be installed according to the installation instructions included.
- Check the appliance for damage after unpacking it. Do not connect the appliance if it has been damaged in transport.
- Only allow a licensed professional to connect the appliance. Damage caused by incorrect connection is not covered under warranty. Call the after-sales service if you want to convert your appliance to a different type of gas.
- This appliance is intended for domestic use and the household environment only. This appliance must only be used to prepare food and drinks and must never be used as a heater. Do not leave the appliance unattended during operation. Only use the appliance indoors.
- Do not install this appliance on boats or in vehicles.
- This appliance is intended for use up to a maximum height of 4000 metres above sea level.
- This appliance is not intended for operation with an external clock timer or a remote control.
- Do not use covers. These can cause accidents, for example due to overheating, catching fire or materials shattering.
- Only use safety devices or child protection grilles approved by ourselves. Unsuitable safety devices or child protection grilles may result in accidents.
- This appliance may be used by children over the age of 8 years old and by persons with reduced physical, sensory or mental capabilities or by persons with a lack of experience or knowledge if they are supervised or are instructed by a person responsible for their safety how to use the appliance safely and have understood the associated hazards.
- Children must not play with, on, or around the appliance. Children must not clean the appliance or carry out general maintenance unless they are at least 15 years old and are being supervised.
- Keep children below the age of 8 years old at a safe distance from the appliance and power cable.
- Close the safety valve on the gas supply line if the cooker will not be used for a prolonged period.
Important safety information
Warning – WHAT TO DO IF YOU SMELL Imrtpoatn safety informtiaon
GAS!
Escaping gas may cause an explosion.
If you smell gas or notice any faults in the gas installation:
- Immediately shut off the gas supply or close the gas cylinder valve.
- Immediately extinguish all naked flames and cigarettes.
- Do not use any light or appliance switches and do not pull any plugs out of sockets. Do not use any telephones or mobile phones within the building.
- Open windows and ventilate the room.
- Call the aftersales service or the gas supplier.
Warning – Risk of asphyxiation!
The use of a gas cooker leads to a build-up of heat, moisture and products of
combustion in the room where the appliance is installed. Ensure that the
installation room is well ventilated. The natural ventilation openings must be
kept open or a mechanical ventilation device must be provided (e.g. an
extractor hood). Intensive and persistent use of the appliance may mean that
it is necessary to have additional ventilation (e.g. opening a window), or
more effective ventilation (e.g. operating the existing mechanical ventilation
device at a higher setting).
Warning – Risk of fire!
-
Hot oil and fat can ignite very quickly. Never leave hot fat or oil unattended. Never use water to put out burning oil or fat. Switch off the hotplate. Extinguish flames carefully using a lid, fire blanket or something similar.
-
Risk of fire! The hotplates become very hot. Never place combustible items on the hob. Never place objects on the hob.
-
Risk of fire! The appliance becomes very hot and flammable materials could catch fire. Never store or use flammable objects (e.g. spray cans, cleaning agents) under the appliance or in its immediate vicinity. Never place flammable items on or in the appliance.
-
Fire hazard! The appliance becomes very hot, fabrics and other objects may ignite. Keep fabrics (e.g. garments, curtains) away from the flames. Never reach over the flames.
-
Do not place flammable objects (e.g. tea towel, newspapers) on, next to or behind the appliance.
-
Risk of fire! When gas hotplates are in operation without any cookware placed on them, they can build up a lot of heat. The appliance and the extractor hood above it may become damaged or be set on fire. Grease residue in the filter of the extractor hood may ignite. Only operate the gas burners with cookware on them.
-
Risk of deflagration! If the burner does not ignite after 15 seconds, switch off the control knob and open the door or window in the room. Wait at least 1 minute before igniting the burner again.
Warning – Risk of burns!
-
The appliance becomes hot during operation. Allow the appliance to cool down before cleaning.
-
Risk of burns! The hotplates and surrounding area (particularly the hob surround, if fitted) become very hot. Never touch the hot surfaces. Keep children at a safe distance.
-
Risk of burns! The accessible parts become very hot when in operation. Never touch hot parts. Keep children at a safe distance.
-
Risk of burns! When the appliance cover is closed, this leads to a build-up of heat. Only operate or switch on the appliance when the appliance cover is open. Do not use the appliance cover for keeping warm or setting down. Only close the appliance cover once the appliance has cooled down.
Caution!
Damage to the appliance -
Remove spilled liquids before opening the appliance cover.
-
Risk of burns! Empty cookware becomes extremely hot when set on a gas hotplate that is in operation. Never heat up empty cookware.
-
Risk of burns! If the liquefied gas bottle is not upright, liquefied propane/butane can enter the appliance. Intense darting flames may therefore escape from the burners.
-
Components may become damaged and start to leak over time so that gas escapes uncontrollably. Both can cause burns. Always use liquefied gas bottles in an upright position.
Warning – Risk of injury! -
Incorrect repairs are dangerous. Repairs may only be carried out, and damaged power and gas lines replaced, by an after-sales engineer trained by us. If the appliance is faulty, unplug the mains plug or switch off the fuse in the fuse box. Shut off the gas supply. Contact the after-sales service.
-
Risk of injury! Faults or damage to the appliance are dangerous. Never switch on a faulty appliance. Unplug the appliance from the mains or switch off the circuit breaker in the fuse box. Shut off the gas supply. Contact the after-sales service.
-
Risk of injury! Unsuitable pan sizes, damaged or incorrectly positioned pans can cause serious injury. Observe the instructions which accompany the cookware.
Warning – Risk of electric shock and serious injury! -
The cable insulation on electrical appliances may melt when touching hot parts of the appliance. Never bring electrical appliance cables into contact with hot parts of the appliance.
-
Risk of electric shock! Do not use any high-pressure cleaners or steam cleaners, which can result in an electric shock.
-
Risk of electric shock! A defective appliance may cause electric shock. Never switch on a defective appliance. Unplug the appliance from the mains or switch off the circuit breaker in the fuse box. Contact the after-sales service.
-
Risk of electric shock! Incorrect repairs are dangerous. Repairs may only be carried out by one of our trained after-sales engineers. If the appliance is faulty, unplug the mains plug or switch off the fuse in the fuse box. Contact the after-sales service.
Causes of damage
Caution!
- Risk of heat damage to adjacent appliances or kitchen units: If the appliance is in operation for an extended period, heat and moisture will be generated. Additional ventilation is required.Open the window or switch on an extractor hood that discharges the extracted air and moisture outside the building.
- Risk of damage to the appliance due to the build-up of heat: Do not heat roasters, frying pans or grill stones using more than one burner at a time.
- Malfunction: Always turn the control knob to the “Off” position when the appliance is not being used.
Environmental protection
The sections below list a number of energy-saving tips iEvnronmental
proteticon
and provide information on disposing of your appliance.
Saving energy
- Choose a burner of roughly the same size as your pan. Place the cookware in the middle.
- Use small saucepans for small quantities. Using a large saucepan with little in it consumes a lot of energy.
- Always place suitable lids on saucepans. Cooking without a lid consumes significantly more energy. Use a glass lid so that you can see into the pan without having to lift the lid.
- Cook with only a little water. This will save energy and preserve the vitamins and minerals in vegetables.
- Switch to a lower heat setting in good time. This will save energy.
Environmentally-friendly disposal
Dispose of packaging in an environmentally-friendly manner.
This appliance is labelled in accordance with European Directive 2012/19/EU concerning used electrical and electronic appliances (waste electrical and electronic equipment – WEEE). The guideline determines the framework for the return and recycling of used appliances as applicable throughout the EU.
Familiarising yourself with your appliance
In this section, we will explain the components and Familiarising yourslef with yrou alppiacne controls.
Gas hob
- ( Power of high-output natural gas burner:
- 3.0 kW
- Pan support
- Control knob:
- = Burner switched off
- Power level 1 = Lowest setting Power level 9 = Highest setting
- Direction of rotation to switch on
- Power of standard-output natural gas burner: 1.9 kW
Visual signals of the luminous disc
The control knob is encircled by an illuminated ring that indicates a number
of statuses and functions.
Individual parts of the burners
Ensure that the burner parts are fitted in the correct position and are
straight; otherwise, there may be ignition problems or problems during
operation. The lugs must engage in the relevant recesses.
- ( Burner cap
- Burner head
- Ignition plug
- Thermocouple element for flame monitoring
Operating the appliance
Notes
- Only use the accessories specified. Do not line the stainless steel recess (e.g. with aluminium foil).
- Do not cover the ventilation openings on the back of the control panel.
- The burner and ignition plug must be clean and dry.
- Only light the burners if the pan supports and all burner parts are correctly fitted.
- To ignite a burner, firmly press the control knob down as far as possible and hold it there, then turn it to the required position.
- Once ignited, press and hold the control knob for approx. 2 to 4 seconds to enable the heat sensor that opens the gas flow to heat up first.
- If the flame does not ignite within 2 to 4 seconds, turn the control knob anti-clockwise to the lowest setting and, once ignited, turn it back to the highest setting. It can often be quicker to ignite the burner in the lowest setting because different gases have different ignition characteristics.
- When one burner is ignited, an ignition spark will also be generated at all the other burners.
- Do not touch the ignition plug while the gas appliance is being lit.
- It is important to keep the appliance clean. If the ignition plugs are dirty, this may cause ignition problems. Clean the ignition plugs regularly with a small, non-metallic brush. Take care to prevent the ignition plugs from suffering any heavy knocks.
Switching on
This appliance is equipped with a step valve. The markings on the control knob
show you the output from power levels from 1 to 9.
Your gas hob comes with ignition plugs for electrical ignition.
- Place a suitable item of cookware on the pan support.
- Push in the control knob for your chosen burner and turn it anticlockwise to the power level you require. The burner ignites automatically.
Turn the control knob to set the power level.
Caution!
Damage to the appliance
Never try to turn the control knob directly from position 0 to position 1, or
from position 1 directly to position 0. Doing this will damage the step valve.
Warning – Risk of deflagration!
If the burner does not ignite after 15 seconds, switch off the control knob
and open the door or window in the room. Wait at least 1 minute before
igniting the burner again.
Switching on manually
During a power cut you can ignite the burners manually.
- Place a suitable pot or pan on the pot grid.
- Press the corresponding control knob and turn it anticlockwise to the required setting. Keep the control knob pressed.
- Use a gas lighter or a match to ignite the burner. Keep the control knob pressed for a few seconds after ignition.
Note: The indicator on the illuminated ring remains off.
Thermoelectric flame monitoring
For your safety, the hob is fitted with thermoelectric flame monitoring. This
prevents the flow of gas if the burner accidentally goes out while it is in
use (e.g. due to draughts).
If the burner accidentally goes out while it is in use, turn the control knob
to the 0 position and wait at least one minute before you ignite the burner
again.
Switching off
Turn the control knob clockwise to position 0.
Warning – Risk of burns!
When the appliance cover is closed, this leads to a build-up of heat. Only
operate or switch on the appliance when the appliance cover is open. Do not
use the appliance cover for keeping warm or setting down. Only close the
appliance cover once the appliance has cooled down.
Caution!
Damage to the appliance
Remove spilled liquids before opening the appliance cover.
Residual heat indicator
After switching off the appliance, the illuminated ring on the control knob
slowly flashes orange until the appliance has cooled enough for it to be safe
to touch. Do not touch the appliance while the residual heat indicator is
flashing.
Table of settings and tips
Power level | Cooking method | Examples |
---|---|---|
9 | Heating | Water, clear soups |
Blanching | Vegetables | |
Deep-frying | Chips, pastries | |
7 – 9 | Searing | Meat |
Frying at high tem- peratures | Meat, potatoes | |
6 – 8 | Simmering with the lid open | Liquids, dough-based foods |
5 – 7 | Baking | Flour-based food |
Frying at medium temperatures | Poultry, fish | |
4 – 5 | Frying at low tem- peratures | Fried sausages, onions, egg dishes |
Defrosting | Frozen food | |
4 | Poaching with the lid open | Dumplings, boiled sau- sages |
Warming | Vegetables, soups, stews | |
3 – 4 | Braising | Beef olives, joints |
Stewing | Vegetables | |
2 – 4 | Simmering with the lid on | Soups, vegetables |
1 | Soaking | Rice, rice pudding, cereals |
- Tips for cooking and roasting
- The values given in the settings table must be looked upon as recommended values. The heat required depends not only on the type and condition of the food, but also the size and contents of the pot.
- Due to the high performance of the cooktop, fat and oil will heat up quickly. Never leave the cooktop unattended, fat can ignite, food can burn.
- Preferably use the rear cooking zones to prepare meals, that need longer to cook.
- Preferably use the high output burners for brief cooking, deep fat frying and searing of large quantities.
Information and tips regarding cookware
- The following information and tips have been provided Information and tips regarding cookware to help you save energy and avoid damaging your cookware. Suitable cooking vessels
- Pans with a diameter of less than 90 mm or more than 200 mm (220 mm for the high-output burner) should not be used.
- Maintain a distance of at least 50 mm between the item of cookware and flammable objects. Maintain a distance of at least 50 mm between the control knob or control panel and the pot or pan. The cookware must not touch the control panel or the control knob. The cookware must not protrude over the edge of the hob.
Precautions for use
- Use pots or pans which are the right size for each burner.
- Do not use small pots or pans on large burners. The flame should not touch the sides of the pot.
- Do not use damaged pots or pans, which do not sit evenly on the cooktop, they may tip over.
- Only use pots or pans with a thick, flat base.
- Do not cook without using a lid and make sure the lid is properly fitted. This wastes energy.
- Always center the pot or pan over the burner, otherwise, it could tip over.
- Do not place large pots on the burners near the control knobs. These may get damaged by the high temperatures.
- Place the pots or pans on the pan support, never directly on the burner.
- Make sure that the pan supports and burner caps are correctly positioned before using the appliance.
- Pots or pans should be placed on the cooktop carefully.
- Do not strike the cooktop and do not place excessive weight on it.
- Do not heat a cooking vessel (e.g. roaster, pan, grill stone) on more than one burner at the same time. The resulting heat accumulation will damage the appliance.
Cleaning and maintenance
Warning – Risk of electric shock!
Cleaning and mainteancne
Do not use any high-pressure cleaners or steam cleaners, which can result in
an electric shock.
Warning – Risk of burns!
The accessible parts become very hot when in operation. Never touch hot parts.
Keep children at a safe distance.
Risk of surface damage
Do not use these cleaners
- harsh or abrasive cleaning agents
- oven cleaners
- corrosive or aggressive cleaners, or those containing chlorine
- cleaning agents with a high alcohol content
- hard and scratchy sponges, brushes or scouring pads
If such an agent comes into contact with the appliance, wash it off immediately with water. Thoroughly wash out new sponge cloths before using them!
Cleaning the appliance
Clean the appliance after each use once it has cooled down. Remove liquids
that have boiled over or spilled immediately and do not allow any food remains
to burn on.
Dry the burners thoroughly after cleaning. Only operate the appliance when the
burners are dry. Damp burners can cause ignition problems and/or an unstable
flame.
During assembly, make sure that the burner parts (catch tappets) are in the
correct position. All parts must be straight.
Burnt-on dirt
For hard-to-remove, burnt-on dirt, you can order a cleaning gel from our
online shop, from your specialist retailer or via our after-sales service
(item
number 00311859). It is suitable for pan supports and the stainless steel
recess. If necessary, let the dirt soak overnight. Follow the instructions on
the cleaning product.
Damage to the surface
Do not use the cleaning gel on the burner parts, the control panel or the
control knobs.
Troubleshooting
Warning – Risk of electric shock!
Incorrect repairs are dangerous. Repairs may only be carried out by one of our
trained after-sales engineers. If the appliance is faulty, unplug the mains
plug or switch off the fuse in the fuse box. Contact the after-sales service.
Faults often have simple explanations. Please read the information in the
table before calling the after-sales service.
After-sales service
Our after-sales service is there for you if your appliance Aftre-slase service needs to be repaired. We will always find an appropriate solution, also in order to avoid after-sales personnel having to make unnecessary visits.
E number and FD number
When calling us, please quote the full product number (E no.) and the
production number (FD no.) so that we can provide you with the correct advice.
The rating plate that features these numbers can be found on the underside of
the appliance. To save time, you can make a note of the numbers for your
appliance and the telephone number of the after-sales service in the space
below in case you need them.
After-sales service
Please note that a visit from an after-sales service engineer is not free of charge in the event that the appliance has been misused, even during the warranty period. Please find the contact data of all countries in the enclosed customer service list. To book an engineer visit and product advice Trust the expertise of the manufacturer, and rest assured that the repair will be carried out by trained service technicians using original spare parts for your domestic appliance.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>