OLIGHT Odiance Portable Worklight User Manual
- June 8, 2024
- OLIGHT
Table of Contents
OLIGHT Odiance Portable Worklight
Thank you for purchasing this Olight Product. Please read this manual carefully before use and keep it for future reference
IN THE BOX
SPECIFICATIONS
REMOTE CONTROL DISTANCE The radius 10M
All above specifications are test results based on ANSI/NEMA FL1-2009 Standard. The tests are performed indoors under a room temperature of 25 degrees celsius with windless conditions. The runtime may vary depending on the external temperature and ventilation conditions, and these biases may affect the results of testing.
PRODUCT OVERVIEW
HOW TO RECHARGE
Please charge the product before first use. Connect one end of the provided USB-C cable to an external USB-C power source (power adapter not included), open the silicone dust plug that shields the USB-C charging port, and then insert the other end of the cable into the USB-C charging port.
BATTERY LEVEL：
NOTE:
Use a 30W or higher USB power source for the fastest charging possible. When
charging with a USB power source that is less than 30W, charging times will be
extended.
BATTERY LEVEL INDICATOR
When the product is turned on or being discharged, the battery-icon indicator displays the remaining battery level.
Replace Remote Controller Battery
INSTALLATION
NOTES:
- The remote control only supports one-to-one control. One-to-many control may cause it to work improperly.
- After being turned off for 48 hours, the product will enter sleep mode, which will cause the remote control to stop working. You can turn the product back on again with the power rotary knob.
- You can control the product with the remote controller and rotary knob simultaneously.
- If the remote control fails due to misoperation, please pair again following the operating instructions.
DANGER
- DO NOT shine the light directly into human eyes. This may cause temporary blindness or permanent damage to the eyes.
- DO NOT cover the product when it is on. The heat built-up may cause close objects to burn or even result in unexpected disasters.
- If the product goes hot, please DO NOT place it in a backpack, fabric bag, or fusible plastic container.
WARNING
- DO NOT store the product in car or other places where the temperature may exceed 60 ℃.
- DO NOT disassemble the product.
- DO NOT immerse the product in liquid, which may damage it.
- Fully charge the battery before storing the product for a long period of time.
- DO NOT use it nearby open flames
NOTICE
- When the charging port is not in use, keep the port dust cover closed to prevent the entry of dust or other foreign matters.
- Please charge the product with a 30W or higher-capacity USB-C power adapter to achieve the fastest charging possible.
- Please keep the product away from radios, as the PWM modulation of the rotary knob may cause noise to the radio signals.
- Brightness level will be capped at 30% if the battery is lower than 40%.
- High mode will stay on for 10 minutes and then steps down to a 50% brightness level within 5 minutes.
- The maximum brightness level is capped at 30% in the charging state.
EXCLUSION CLAUSE
Olight is not liable for damages or injuries sustained resulting from the usage of the product inconsistent with the warnings in the manual
HOW TO OPERATE
LEFT ROTARY KNOB (POWER)
ON/OFF: Rotate the knob clockwise to turn on or counterclockwise to turn off. Stepless Adjustment of Brightness: While the light is on, rotate the knob clockwise to increase brightness or counterclockwise to decrease brightness.
RIGHT ROTARY KNOB (COLOR TEMP.)
Change Color Temperature: While the light is on, rotate the knob clockwise to
decrease color temperature or counterclockwise to increase color temperature.
Note : The color temperature ranges from 2700K to 6000K within 10 levels. Each position of the rotary knob corresponds to one level.
REMOTE CONTROL
- Single press to turn the light on or increase the brightness by one level (10 levels available). Long press for 1 second to access the brightest setting directly.
- Single press to turn the light off or decrease the brightness by one level (10 levels available). Long press for 1 second to turn it off directly.
- While the light is on, single press to increase the color temperature by one level (10 levels available) until it reaches 6,000K. Long press for 1 second to reach 6,000K directly.
- While the light is on, single press to decrease the color temperature by one level (10 levels available) until it reaches 2,700K. Long press for 1 second to reach 2,700K directly.
Remote Control Pairing: For the remote controller, press and hold the ON and OFF simultaneously for 1S , and its red indicator will flash at 1Hz to enter the pairing mode; For the light, after being turned off, please complete the following steps within 5 seconds: quickly rotate the color temperature rotary knob clockwise for 3 positions, counterclockwise for 3 positions, and then clockwise again for 3 positions to enter the pairing mode. If pairing successfully, the light will quickly flash twice. If not, it will exit the paring mode after 5s.
Remote Control Operation: Before controlling, please turn on the light. And then, the on/off state and color temperature can be adjusted with the remote controller.
WARRANTY
Within 30 days of purchase: Contact the original seller for repair or replacement.
Within 2 years of purchase: Contact Olight for repair or replacement.
Odiance-RC: One year.
This warranty does not cover normal wear and tear, modifications, misuse, disintegrations, negligence, accidents, improper maintenance, or repair by anyone other than an authorized retailer or Olight itself.
USA Customer Support: cs@olightstore.com
Global Customer Support: customer-service@olightworld.com
Visit www.olightworld.com to see our complete product line of portable illumination tools.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interíierence, and
- This device must accept any interference received, including interference that may cause undesired operation.
WARNING : Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and,if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turing the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF Warning Statement:
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
IC STATEMENT
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Dongguan Olight E-Commerce Technology Co., Ltd 4th Floor, Building 4, Kegu Industrial Park, No 6 Zhongnan Road, Changan Town, Dongguan City, Guangdong, China. Made in China
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>