Shenzhen Fine Offset Electronics GW2000 7-in-1 Weather Station User Guide

Shenzhen Fine Offset Electronics GW2000 7-in-1 Weather Station

INSTRUCTIONS

Attention: Our product is continuously changing and improving, particularly online services and associated applications.
To download the latest manual and additional help, please contact us at support@ecowitt.com or support.eu@ecowitt.net (EU/UK).
Manufacturer：
ShenZhenShi OuSaiTeDianZi YouXianGongSi
Add: C Dong 4 Ceng A, Minzhujiujiugongyecheng AQu, Xihuanlu, Shajingjiedao, Baoanqu Shenzhen, Guangdong 518101, CN E-mail: support@ecowitt.com support.eu@ecowitt.net (EU/UK)

• Please scan the QR code to read English manual and keep it for future reference
• Bitte scannen Sie den QR-Code zudeutsche Anleitung lesen und aufbewahren füZukunftsbezug Si prega di scansionare il codice QR perleggi il manuale italiano e conservalo perReferenza futura

Instruction manuals
https://www.ecowitt.com/support/download/178I

Compact and Built to last

Feature

Replaceable Temperature & Humidity Sensor

While compact,the entire structure of WittBoy is built to be robust and designed to withstand the test of time. The Temperature and Humidity Sensor Kit can be replaced whenever required.

1. Use screwdriver to untight the screws of the sensor.
2. unplug the old sensor
3. Replace the old Temp & Humidity sensor with new one

Paired with Wi-Fi Hub GW2000

Your private weather station will pick up data of temperature, humidity, wind direction and speed, light and UV levels, as well as rainfall, and report it to you through its APP or the ecowitt.net website.

or your own defined server

Specification

Measurement specification

Measurement/Range/Accuracy/Resolution

Wind speed| 0~40m/s| <10m/s,+/-0.5m/s

≥10m/s,+/-5%

<4m/s,TBA

| 0.1M/S
---|---|---|---

Temperature

|

-40~60°C

| ≥10m/s,±10°

±0.5°C

| 1°

0.1°C

Humidity| 1~99%| ±5%| 1%
Light| 0~300Klux| ±15%| 10Klux
UVI| 1~15| ±2| 1
Rain| 0~9999| ±10%| 0.1mm

Power consumption

FCC WARNING

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.

References

• Ecowitt Weather
• Ecowitt Weather
• ECOWITT Welcome to Ecowitt!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>