POWERSTICK 9178 ClearCharge Charging Device Instruction Manual
- June 8, 2024
- POWERSTICK
Table of Contents
POWERSTICK 9178 ClearCharge Charging Device Instruction Manual
Setting up ClearCharge
Use the included charging cable to plug ClearCharge into a USB power source
(USB adapter, computer, power bank).
Wireless Charging
With ClearCharge plugged in, place your wireless charging-compatible device on top of the charging coil (screen-side up for smartphones).
Note: the wireless charging area is typically found in the back-center of a smartphone. Please refer to your device’s user manual if you are having trouble finding the location.
When the alignment is correct, ClearCharge will light up and begin charging.
The light will turn off when charging is complete and your device’s battery is
full.
Align the center of y upwards. on top of the
Align the center of your upwards. on top of the Cle
hone. screen facing rCharge charging coil.
Troubleshooting
There should not be any metal items in between your device and ClearCharge
while charging.
ClearCharge will flash 3 times if there is an error.
To remedy this, remove any interfer-ing objects and try charging again. You can also try unplugging ClearCharge and replugging it in to reset it.
Exclusive product warranly offer
This product is backed by a warranty thot covers repair or replacement at our
option. You must register by filling out the online form within 10 days of
receipt of this product:
Questions? Email support@powerstick.com
FCC statement:
This device complies with Part 15 of the FCC rules. Operation is subject to
the
following two conditions: 1) this device may not cause harmful interference,
and 2) this device must accept any interference received, including
interference thatm may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party respo sible for compliance could void the user’s authority to operate the equipment. Radiation Exposure Statement This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. During the operation of device a
distance of 15 cm surrounding the device and 20 cm above the top surface of
thedevicemust be respected.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>