POWERSTICK COM 4073 Luna Bluetooth Speaker User Manual
- June 5, 2024
- POWERSTICK COM
Table of Contents
FCC ID:2AITNLUNA
Luma ultra-portable + water-resistant + wireless speaker
Product Support
For more information:
www.powerstick.com
For technical support, email us at :
support@powerstick.com
Designed in Canada by POWERSTICK.COM Assembled in
China.
Features
» Bluetooth® 4.2 with low-energy consumption
» 30-feet Bluetooth® connectivity range
» 5-watt speaker for rich & powerful playback
» Passive radiator for bass boost
» Water-resistant for the outdoors
» Easy access buttons for quick music control
» Built-in microphone to use for conference calling
» More than 6 hours of playtime
Specifications
| Product \Number | 803193 |
|---|---|
| Communication | Buetooth® 4.2 |
| Bluetooth® Range | Up to 30 ft. |
| Playback Time | 6 hours or more |
| Speaker Output | 5-watts |
| lnput | +5V, 500mA |
| Battery Capacity | 600mAh |
Overview
Using Speakerphone
While your speaker is playing music and you receive a phone call, you will hear the ring through LUNA. You can press the play/pause button on to pick up the phone call. When you are done, press the play/pause button again to hang up. You can also pick up and hang up phone calls using your smartphone.
Setting up your speaker
-
Press and hold the Power button to turn On LUNA. You will hear a startup notification. The Indicator light will begin flashing red and green. You are now in Pairing Mode.
-
Go to your phone/device Settings.
Find your Bluetooth® settings.
(Note: if you are having trouble, please refer to your devices support manual.) iOS Android or 0 -
You should see LUNA listed in the list of nearby Bluetooth® devices. If you do not see LUNA, make sure that you are in Pairing Mode (Indicator Light will flash red and green on LUNA).
-
Tap on the device named LUNA to pair by Bluetooth®. Once paired, you will hear a notification indicating a successful pairing and the Indicator Light will flash green.
-
Go ahead and play your favorite tunes on LUNA! 6. When you’re done listening, press and hold the Power button to turn Off LUNA.
(Note: to pair LUNA with another device, you must first disconnect any devices currently paired by either: 1) turning off the first device Bluetooth®, 2) forgetting LUNA as a paired device, or 3) not having the paired device within range.)
Charging your speaker
When your speaker is running low on battery, using the included charging
cable, insert the micro-USB end into the Charging Port of LUNA and the larger
USB end into a USB power source (computer, USB charger, etc.)
Product Temperature Range : 0º C -45º C
The device has been evaluated to meet general RF exposure requirements, The
device can be used in portable exposure conditions without restriction.
Federal Communication Commission (FCC)
Radiation Exposure Statement Power is so low that no RF exposure calculation
is needed. This device complies with part 15 of the FCC rules. Operation is
subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
NOTE: The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications or changes to this
equipment. Such modifications or changes could void the user’s authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.