VENETA 65101-10237-D Cordloop Honeycomb Blind Instruction Manual

How to install your
Cordloop Honeycomb Blind
#65101-10237-D
Instruction Manual

65101-10237-D Cordloop Honeycomb Blind

Required Tools

Included Hardware

The hardware can be found in the end of every box.

| Installation Bracket
---|---
| Tension Device (Cleat)
| Short & Medium Screws for Wood
| Wall Plugs for Brick or Cement using a 6mm bit (if requested)

Need HELP?
Call our
Customer Service team for assistance
1300 836 382

Installation Brackets

Installing inside the window frame…

• At top of window frame, measure 75mm in from each side.
• Measure 4mm back from front of window frame and mark the position of the centre front of the window.
• Place brackets in position and mark where the screws will go.
• We recommend drilling pilot holes for the screws using a 2mm bit.
• Fix the brackets into position using the medium screws provided.
• If more brackets are supplied, space them evenly between the first two brackets.

Installing outside the window frame…

• Measure 75mm in from top left and top right of where the blind will sit (normally edge of architrave) and mark the centre of the brackets.
• Place brackets in position and mark where the screws will go.
• We recommend using a spirit level to align brackets if not installing on the architrave.
• We recommend drilling pilot holes for the screws using a 2mm bit.
• Fix the brackets into position using the medium screws provided.
• If more brackets are supplied, space them evenly between the first two brackets.

Install Blind

• Position the top front of the blind under the top front lip of the brackets.
• Push the blind up at the back and click into position as per diagram.

Install the Tension Device (Cleat)

Mark the position where the tension device will be installed.
The tension device shall be installed at the maximum distance possible from the control mechanism to prevent the looped pull cord(s) becoming slack.
Install the tension device with two short screws which must be secured into a solid surface.
When positioning and installing the tension device, make sure the cord is taut without stretching, twisting or crossing. Great Job… Enjoy your new Veneta Blinds!
How to operate and maintain your
Cordloop Honeycomb Blind
Operating your Blind

• Pull cord to operate blind.
• Tension device must be fully tightened prior to operating the blind.

1. Removing your blind
   • Position a flat head screw driver between the back of the headrail and center of the backet, and push up the flip on the bracket.
   • While pushing upwards, gently swing the screwdriver forward to pry the bracket off the head rail.
   • Repeat for all other brackets.
   

2. Dusting
   • Dust can be removed using a feather duster or vacuum with brush attachment on low suction.

3. Spot Cleaning
   • Use a warm damp cloth or a mild detergent for tougher stains.
   • Dab the affected area, but do not rub the fabric. Finish with just a warm damp cloth.
   • Allow the fabric to dry in the lowered position.

4. Ultrasonic
   • If ultrasonically cleaning the blind please specify that a mild solution must be used.
   • Note the rails should never be immersed in liquid.

WARNING
ALL WINDOW COVERINGS WITH CORD OR CHAIN
To avoid creating a possible strangulation hazard for children, the corded or chained internal window covering must be installed in such a way that a loose cord or chain cannot form a loop 220 mm or longer at a height of less than 1600 mm above floor level.

• A cord/chain guide may be installed lower than 1600mm above floor level if the cord/chain is sufficiently secured or tensioned to prevent a loop 220 mm or longer from being formed.
• If a cord/chain guide is installed lower than 1600 mm above floor level, it must be designed to prevent a child from being able to remove the cord/chain.
• If a cleat is used to secure the cord, it must be at least 1600 mm above floor level because a child is capable of unwinding a cord from a cleat.

www.venetablinds.com.au/child-safety
Feedback?
We would love to know how you went with your installation…
Please write a review on our website at… www.venetablinds.com.au

Difficulty:

References

• Veneta® Blinds: Online Blinds | Shop Window Blinds Made To Measure – Veneta Blinds

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>