legrand Green’up Surface Mounting Socket Instruction Manual
- June 8, 2024
- Legrand
Table of Contents
Green’up Surface Mounting Socket
Instruction Manual
Green’up Surface Mounting Socket
Green’up™ Access ready to install kit for electric vehicle charging for
electric vehicle charging
Green’up ™ Access sockets 16 A – 230 V – 16 A EV – for electric vehicles
The Green’up system is based on an innovative Legrand technology, activating
“maximum power” mode and ensuring a secure and fast charging process.
Installation principle p. 376
Dimensions p. 376
| Pack | Cat.Nos | Ready to install kit – 16 A EV |
|---|---|---|
| 1 | 0 904 70 | Allows creating a safe infrastructure for electric and hybrid |
vehicle charging, using Mode 2 (or Mode 1) charging cables. Suitable for
residential and workplace use
Power supply directly from the electrical panel:
1 dedicated line 3 x 2.5 mm2 cable, protected with one RCBO (one line per
socket)
The kit contains:
– 1 heavy duty German standard Green’up Access plastic socket, with flap
cover, IP 55 – IK 08 – 16 A – 230 V – 16 A EV, 6 mm2 screw terminals,
according to IEC 60884-1, NF C 61-314, VDE 620-1
– 1 base for hanging up the vehicle charging cable control box
– 1 RCBO 16 A, C curve, 30 mA, F type Cat.No 4 107 53
The use of a surge protective device is recommended
Recommended installation height: between 0.80 and 1.20 m from the floor
Installation principle p. 376
Dimensions p. 376
Used for safely charging rechargeable electric and hybrid vehicles which take
Mode 2 cord (compatible with Mode 1) Connected to the consumer panel via one 3
x 2.5 mm2
dedicated line (1 line per socket) protected by 30 mA – 20 A C curve, type A
or HPi RCBO (or 30 mA type A or HPi RCCB + 20 A C curve circuit breaker)
Recommended installation height: 1.30 m from the floor Suitable for
residential and workplace use
| Pack | Cat.Nos | Mode 1 and Mode 2 sockets – 16 A EV |
|---|---|---|
| 1 | 0 904 72 | Heavy-duty mechanisms with silvered contacts |
Single-phase sockets – screw connection – 230 V
Supplied with base Cat.No 0 904 78 for hanging up
the vehicle charging cable control box
For charging 1 vehicle
Conform to IEC 60-884-1
IP 55 – IK 08 surface-mounting
Suitable for installation in private houses
Plastic socket with flap cover
Supplied complete with surface mounting box fitted
with an ISO 20 cable gland
Dimensions (H x W x D): 98 x 98 x 70 mm (exc. cable gland)
German standard socket outlet
1| 0 778 56| IP 55 – IK 10 flush-mounting – metal socket
Suitable for installation in private houses, lock-up garages, parking lots,
etc Supplied complete with plate and support Mounting in 1-gang Batibox flush-
mounting box depth 50 mm
Can be surface mounted with box Cat.No 0 778 90
Dimensions (H x W x D): 110 x 110 x 13.5 mm
German standard socket outlet
1| 0 778 57| IP 55 – IK 10 flush-mounting – metal socket with locked flap
cover
Suitable for installation in private houses, lock-up garages, parking lots,
etc
Supplied complete with plate and support
Mounting in 1-gang Batibox flush-mounting box depth 50 mm
Can be surface mounted with box Cat.No 0 778 90
Dimensions (H x W x D): 110 x 110 x 13.5 mm
Supplied complete with a unique set of 2 keys in order to restrict access to
the socket
German standard socket outlet