superbrightleds com TJSL-xKx LED Job Site Light User Manual
- June 8, 2024
- superbrightleds com
Table of Contents
superbrightleds com TJSL-xKx LED Job Site Light
Important: Read all instructions prior to installation.
LED Job Site Light
Specifications
Model | TJSL-xK60W | TJSL-xK100W | TJSL-xK120W |
---|---|---|---|
Operating Temperature | -40°–113° F (-40°–45° C) | ||
IP Rating | IP65¹ | ||
Fixture Weight | 4.45 lb (2 kg) | 4.85 lb (2.2 kg) | 5.25 lb (2.4 kg) |
Max Run (10 A) | 20 | 12 | 10 |
Check product label for specific electrical specifications related to installation. Improper installation will void warranty.
Hanging Latch Instructions
Built-in latch will accommodate pipe or cable up to 0.5” diameter.
Safety and Notes
-
This product should be installed in accordance with applicable national, state, and local building and electrical codes.
-
To reduce the risk of electric shock, ensure that the main power source and circuit breakers are switched off before performing any installation.
-
Avoid looking directly into the lamp when illuminated.
-
Ensure mount is securely attached and will support the weight of the fixture.
Failure to properly support the fixture may result in damage or injury, for which the manufacturer does not assume responsibility. -
Supply power can be linked (see spec table for max run).
-
Do not install in a location that is in proximity to a radiant heater.
Linking Instructions
Lights can be linked in a run which uses 10 A or less of total current. The number of lights will vary based on part number (see spec table above). When linking lights, make sure safety clip is fully engaged to ensure cord cannot accidentally become unplugged.
Rev Date: V0.1 01/10/2022 4400 Earth City Expy, St. Louis, MO 63045
866-590-3533
superbrightleds.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>