EVERBILT SBA033V1 Submersible Sump Pump User Guide
- June 4, 2024
- Everbilt
Table of Contents
EVERBILT SBA033V1 Submersible Sump Pump
Instructions
- Ensure basin is clear of all debris and place pump on hard level surface (not dirt or gravel). 14” x 22” minimum basin size required.
- Measure, cut and install discharge fittings, check valve, and piping. Drill a 3/16” hole in the discharge pipe, level with the top of the pump.
- Plug Pump in to GFCI outlet on dedicated circuit with 15 amp breaker
- Test operation by adding water until float rises, pump turns on, and the water level drops. Float will lower with the water level and turn the pump off.
- Install optional basin cover.
Read User Manual Online (PDF format)
Loading......