PETLIBRO PLAF101 Essential WIFI Feeder User Guide
- June 8, 2024
- PETLIBRO
Table of Contents
PETLIBRO PLAF101 Essential WIFI Feeder
- Please make sure the Bluetooth on your mobile is turned on before the connection.
- Please use indoor only to avoid direct exposure to the sunlight.
- Please connect the Feeder via 2.4GHz only. If your WIFI is 5GHz on ly, set it to be compatible with 2.4GHz mode.
- The WIFI password is composed of no more than 12 dig its and letters. No special symbols are supported.
- Please keep the feeder close to the router. The distance in a range of 6 meters without wall barriers is recommended.
- If the configuration fails, please power off and restart the feeder (press and hold the Reset button for 6s), then wait for about 2mins to re-configuration.
Installation
-
Open the App, select Home page, tap “Add Device” or”+” in the upper right corner.
-
Choose PLAF101 WiFi Feeder.
-
Follow the instructions on the screen, and confirm the WiFi indicator on the feeder is flashing.
Check by following the steps shown on the screen:- Select ‘Bluetooth’ on the top right corner
- Turn on the Bluetooth on your phone
- Check if the indicator flashes (once every O.Ss)
-
Click Next after checking
Note: If the indicator doesn’t flash (once every 0.Ss), click Reset Device Step by Step and complete the steps. -
Add the device PLAF101 by entering WiFi account and password.
Note: Only connect to 2.4G network
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>