VEVOR CW03 Hitch Cargo Carrier Folding User Manual
- August 13, 2024
- VEVOR
Table of Contents
VEVOR CW03 Hitch Cargo Carrier Folding
Specifications
- Model Series: CW03
- Maximum Load Capacity(lbs): 500
- For Use With: 2’’ x 2’’ Class III and IV Hitch Receivers
- Cargo Basket Dimensions: (mm) 1524×610×152
- Hitch Pin: 5/8” Diameter with Cotter Pin
- Gross Weight(kg): 29.4
- MEAS(mm): 880×670×175
Product Usage Instructions
Safety & Warning
- It is crucial to read and understand the entire manual before assembling, installing, operating, or servicing the Hitch Cargo Carrier. Failure to follow the instructions can lead to serious injury or damage.
- Always adhere to Department of Transportation (D.O.T.) requirements and securely hold all cargo in place using ropes and tie downs.
- Ensure the vehicle supporting the Cargo Carrier complies with all instructions provided in the owner’s manual. The vehicle’s engine must be OFF with the parking brake set during loading or unloading.
- The Cargo Carrier must be attached to a 2”x2” Class III or Class IV hitch receiver installed by a qualified service technician. Do not exceed the weight capacity of the Carrier.
Assembly and Usage
- After assembly, test all vehicle systems including lights and brakes. Regularly inspect the Carrier and hitch receiver for any damage. Replace the product if any damage is detected.
- Work in a clean, well-lighted area, and keep spectators and children away. Dress appropriately and avoid loose clothing or jewelry that may get caught in moving parts.
- Avoid dynamic loading situations by ensuring loads are placed on the Carrier carefully. Never load people or animals onto the Carrier.
Maintenance
- Frequently check the condition of the Cargo Carrier and its components. Ensure all hardware is tightly secured and keep the Carrier clean.
- Stay alert and focused when setting up and using the Cargo Carrier. Avoid using the product under the influence of alcohol, drugs, or medications.
We continue to be committed to provide you tools with competitive price.
“Save Half”, “Half Price” or any other similar expressions used by us only
represents an estimate of savings you might benefit from buying certain tools
with us compared to the major top brands and doses not necessarily mean to
cover all categories of tools offered by us. You are kindly reminded to verify
carefully when you are placing an order with us if you are actually saving
half in comparison with the top major brands.
Model: CW03
NEED HELP? CONTACT US!
Have product questions? Need technical support? Please feel free to contact
us: CustomerService@vevor.com
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our user
manual. The appearance of the product shall be subject to the product you
received. Please forgive us that we won’t inform you again if there are any
technology or software updates on our product.
Safety & Warning
- Read and understand this entire manual before assembling, installing, operating, or servicing this product. Failure to follow these warnings and instructions can cause death, personal injury or damage to valuable property.
- Adhere to all Department of Transportation (D.O.T.) requirements when using this product. Use ropes and tie downs (not included) to securely hold all cargo in place.
- For the vehicle that will support the Cargo Carrier, read all pertinent vehicle instructions and warnings provided in the owner’s manual. Make sure the vehicle’s engine is OFF, with parking brake set, before loading or unloading the Cargo Carrier.
- This Cargo Carrier must be attached to a 2’’x2’’ Class III or Class IV hitch receiver. The hitch must be properly installed by a qualified service technician and be certified to support the weight of this Cargo Carrier and its contents.
- This Cargo Carrier is designed to haul firewood, coolers and other similar loads. Do not modify the Carrier and do not use this product for purposes that it was not designed for.
- Do not overload the Cargo Carrier. Never exceed the maximum weight capacity.
- When assembly is complete, check and test all vehicle systems including lights and brakes; make sure no damage occurred during product installation.
- Frequently check the condition of the Cargo Carrier and the vehicle’s hitch receiver. Make sure all components are in good condition. If the Cargo Carrier or hitch receiver become damaged through accident, or if any weld damage is noted, the product should be replaced. Check to make sure that all hardware is tightly secured in place. Keep the Cargo Carrier clean.
- Use common sense when working. Stay alert and concentrate when setting up and using the Cargo Carrier. Never work while under the influence of alcohol, drugs or medications.
- While assembling and using the Cargo Carrier keep work area clean and well lighted. Keep spectators and children out of the work area.
- Dress appropriately. Never wear loose fitting clothing or jewelry when working. Contain long hair, and keep hair, clothing and gloves away from moving parts.
- Be aware of the danger of ”dynamic loading”. This situation arises when a load is dropped onto the Carrier, resulting in a short term excessive load. Dynamic loading can result in damage and failure of the Carrier and/or hitch receiver, and personal injury to the person loading the Carrier.
- Never load people or animals into the Cargo Carrier.
- Weight inside the Cargo Carrier should be evenly distributed, with heavier items positioned towards the center of the Carrier.
- Note the position of the vehicle’s exhaust pipes before setting up the Cargo Carrier. Make sure exhaust pipes are not in close proximity of the Cargo Carrier; flammable goods in the Cargo Carrier could catch on fire due to heat from the exhaust. If this risk exists on your vehicle, do not use the Cargo Carrier.
- Do not ride in vehicle being loaded or unloaded. Load and unload vehicle slowly, according to manual instructions
Package Contents
Part | Description | Qty |
---|---|---|
1 | Rotating Seat | 1 |
2 | Bolt M10×75 | 1 |
3 | Bolt M10×40 | 20 |
4 | Washer | 25 |
5 | Frame | 2 |
6 | Bag Buckle Strap | 6 |
7 | Ratchet Belt | 2 |
8 | Support Rod | 1 |
9 | Small Connecting Plate | 3 |
10 | R pin φ4.0 | 1 |
11 | Hook Stabilizer | 1 |
12 | Cargo Network | 1 |
13 | Rotary Bolt φ16*90 | 1 |
14 | Combination Lock | 1 |
15 | Cargo Package | 1 |
16 | Big Connecting Plate | 1 |
17 | Nut M10 | 25 |
18 | R pin φ2.0 | 1 |
19 | Rotary Bolt φ10*75 | 1 |
20 | Nut M8 | 2 |
21 | Bolt M10×70 | 4 |
Installation Guide
- A. Flip the two frame(5) over,And then attach the support rod (8) to the two framer with Bolt (21),Washers (4) and Nuts (17).Attach the small connecting plate(9) and the big connecting plate(16) to the frame component with Bolt (3),Washers (4) and Nuts (17).
- B. Attach the rotating seat(1) to the support rod (8) with the bolt (2), rotary bolt(19),R pin(18),washers (4) and nut (17) .
- C. To place the cargo carrier on the vehicle’s hitch receiver:
- With a helper, lift the empty cargo carrier and insert rotating seat(1) into the vehicle’s hitch receiver.
- Align the holes on rotating seat(1) and vehicle’s hitch receiver,and then insert the rotary bolt(13) to the holes ,insert the R-pin(10) to the holes of rotary bolt(13) for last.
- D. Make sure all hardware is securely tightened.
- E. Load the cargo carrier as needed. Use ropes and tie downs to securely hold all cargo in place.
- F. When there is no cargo in the cargo frame, you can pull out the rotary bolt(19),and flip the entire cargo frame 90 degrees,and insert rotary bolt(19) to up holes of rotating seat(1),insert the R- pin(18) to the holes of rotary bolt(19) for last.
Support and E-Warranty Certificate https://www.vevor.com/support
Made In China
FAQ’S
Q: What should I do if I notice damage to the Cargo Carrier or hitch
receiver?
A: If any damage is observed, the product should be replaced immediately to
ensure safe usage.
Q: Can I use the Cargo Carrier for purposes other than hauling firewood,
coolers, or similar loads?
A: It is not recommended to modify the Carrier or use it for purposes other
than its intended design.