LENOXX PDVD1500 15.4 Inch Swivel Portable DVD Player Instruction Manual

: June 5, 2024
: lenoxx

LENOXX PDVD1500 15.4 Inch Swivel Portable DVD Player Instruction Manual

Features:

Lightweight, Compact & Portable Hi-Res HD Widescreen Display
Top-Loading CD/DVD Tray • Built-in Rechargeable Battery
Dual Full Range Stereo Speakers
USB Flash & SD Memory Card Readers
Versatile Digital Media File Compatibility
Audio, Image & Video File Support
Swivel Angle Adjustable Display Screen
Top Panel Button Controls . Speaker: 3W (2 X 1.5W)
Headphone Jack, 3.5mm • Copy MP3 files from a CD to USB stick
Display Type: 15.4″ -inch LCD (16:10)
Monitor Rotation: 270 Degree Left/Right
Battery: 2500mAh, Li-thium battery 7.4V
Battery playback time after full charge: 2 hours
Battery re-charge time: 5 — 6 Hours
Resolution size pixels: 1280 x 800
Frequency Response: 20-20kHz
Dynamic Range: >85dB
T.H.D.: <1.0% • CD/DVD Compatibility Type: VCD, CD-RW, DVD-R
Digital Media File Support: AVI, MPS, WMA, JPG, VCD, EVD, VOB
Maximum USB/SD Flash Memory Support: Up to 32GB
Power: 100/240V (12V DC Power Adaptedi

IMPORTANT SAFETY INSTRUCTIONS AND PRECAUTIONS

Warning:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE TO MOISTURE. DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. SERVICE MUST BE CARRIED OUT BY QUALIFIED PERSONNEL ONLY, OR THE WARRANTY IS NOT VALID.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to
alert the user to the presence of non-insulated dangerous voltage within the product. This may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert user to the presence
of important operating procedures and maintenance (service) instructions in the literature accompanying the appliance.

Laser product symbol: located on the rear panel of the unit (in some cases at the bottom side), indicates that this player is a class 1 laser product, it uses only weak laser and no hazardous radiation outside of the unit.

Installation

Ensure that the portable DVD player is installed in accordance with the instructions and illustrations provided in this manual.

General Precautions

Read through this instruction manual before installation and use.
Do not touch the power plug with wet hand.
Switch off the main power when the unit is not in use. (Disconnect the power plug from the power outlet when you do not intend to use the unit for a longer period of time.)
Do not open the cover or touch any of the components inside the unit, only for qualified technicians.
Do not expose the unit to direct sunlight or nearby objects that radiate heat to avoid damage to the unit
Do not place the unit in moist and humid environments. 7) Please ensure the ventilation holes are not covered to avoid overheating and malfunction.
Clean the panel and case with soft dry cloth only, do not apply any kind of thinner, alcohol or sprays.
The apparatus shall not be exposed to dripping or splashing, nor should any objects filled with liquids, such as vases, be placed on the apparatus.

Clean the Machine

Please ensure the machine is power off before cleaning. 2) Do not use any chemicals or cleaning agents to clean the machine. 3) Use slightly damp cloth to clean the outside of the machine. Do not Open
To reduce the risk of Electric Shock, Do not remove cover (or back). No user- serviceable parts inside. Refer servicing to qualified service personnel.

Care of Disc

Do not place disks near heat sources such as direct sunlight or high humidity areas.
Stack disks on top of each other, in the same way.
Do not touch the disk surface, hold the disc by the edges.
Do not use adhesive tape on the disk surface.
Wipe the disk from inside to outside with a soft cloth.
Do not use gasoline, non-disc special or antistatic cleaning agents to clean the disc because these substances will cause damage.

Please check the contents of the packaging carefully.

INSTALLATION

Indoor Use

Locate a spare mains outlet and turn it OFF.
Plug the supplied AC adaptor into the outlet.
Connect the other end to the SC9-12V/2A DC power input socket on the side of the DVD player.
Turn the main outlet ON. 5. Turn the main Power Switch on the Player to the ON position. In-car Use
1. With the vehicle ignition off, connect the supplied car charger to the vehicle power outlet. 2. Connect the other end to the SC9-12V/2A DC power input on the side of the DVD player. 3. Turn the vehicle ignition to ON or ACC to power the outlet and slide the DVD player power switch to the ON position.
Note: Care should be taken with all cable and connections with the DVD player. Please ensure that there is no tension on any connection as this may damage the units. Tidy any excess cabling to trip hazards that may damage the player.

Playback panel

Side panel

The Remote Control

Batteries in the remote control

Remove the battery cover from the rear of the remote control.
Add 2 x AM batteries (not included) to the remote as per the polarity directions in the battery compartment in the remote control.
Put the battery cover back onto the rear of the remote control.

Note:

Do not use re-chargeable batteries in the remote control, because they lose power at a slower rate.
Do not mix different brands and type of batteries, do not use old and new batteries together.
When the remote control function is not strong or control range is small, replace the batteries.
If the remote control will not be used for a long time, remove the batteries to avoid damage to the remote control from battery leakage or corrosion.
Do not use the remote control in hot or humid conditions.
Do not disassemble the remote control.

Basic Function Operation

Operation Connect either the 240V mains power adaptor (indoor use) or the 12V car adaptor (in car use) to the DC input socket on the DVD player. Switch the ON button on the machine to turn on the DVD player. Turn the switch to OFF when not in use.
Place disc 1) Press OPEN to open the disc cover. 2) Hold the edge of the disc insert the disc. 3) Close the disc cover.
Play /Pause 1) This player will automatically play once the disc is loaded. 2) Press ► to pause 3) Press ► once more to resume play.
Play back from USB/SD/MMC memory card Press the SD/USB button to play back from USB or memory card.

Basic Function Operation

Operation Connect either the 240V mains power adaptor (indoor use) or the 12V car adaptor (in car use) to the DC input socket on the DVD player. Switch the ON button on the machine to turn on the DVD player. Turn the switch to OFF when not in use.
Place disc 1) Press OPEN to open the disc cover. 2) Hold the edge of the disc insert the disc. 3) Close the disc cover.
Play /Pause 1) This player will automatically play once the disc is loaded. 2) Press ► to pause 3) Press ► once more to resume play.
Play back from USB/SD/MMC memory card Press the SD/USB button to play back from USB or memory card.

System Setup Page a. Screen Display: NTSC & PAL & AUTO b. Last Memory State: When the DVD player is powered off, the system can resume playback from its last position when the DVD player is turned on again. The options are ON or OFF. c. Screen Saver: The options are ON or OFF. d. Display Type: The options are:
4:3 PS: When a wider screen video is played, the left and right edges of the video will be cut off.
4:3 LB: When a wider screen video is played, the top and bottom of the screen will have black strips. 16:9: Suitable for a wide screen display Note: the play effect is related to the ratio of the video recorded. Therefore, some videos may not be played in the screen size you have chosen. e. Password: works with classification disc. The default password for this model is 0000. Initially, this option is set as ‘password lock. To revise the password, the old password must be entered and then a new password can be added by using the numerical keys. The new password must be 4 digits in length. f. Rating (Age limit). For use with a disc which allows for this function. You can choose an age control level. The options you can choose from are: 1. Kid Safe. 2. G.

3. Pg 4. Pg 13 5. Pg-R 6. R 7. NC 17 8. Adult This function is only suitable for a disc with the level limit system. This function will only work when the password function has been released. g. Default Value: Factory Reset. When this is chosen
2) Language Setup a. OSD Language: English, Chinese, French, German, Spanish, Italian, Portuguese, Russian, b. Audio Language: English, Chinese, French, German, Spanish, Italian, Portuguese, Russian, c. Subtitle Language: English, Chinese, French, German, Spanish, Italian, Portuguese, Russian, d. Menu Language: English, Chinese, French, German, Spanish, Italian, Portuguese, Russian, note: if a language you have chosen is un-available in the DVD, then this device will automatically choose the defaulted language of the disc.

ICD copying to USB flash stick

When playing a CD/MP3 disc, insert a USB flash stick to the USB port on the DVD player, press the COPY button. Press the up/down buttons on the remote control to move the cursor to TRACKS. Press the right arrow button on the remote control to move the cursor to the TRK TITLE menu. Press the enter button on the remote control to choose all tracks. Press the up/down buttons on the remote control to move the cursor to the track to be reproduced and press the enter button to confirm.

Press the enter button on the remote control to choose the desired music track, press the arrow buttons on the remote control to move the cursor to the START option and then press the enter button to start copying.

During the copying process, do not remove the USB stick from the DVD player or power the DVD player off. When the music file to be copied has played in full, the copying process will be complete at the same time. When the copying process has been completed, use the arrow buttons on the remote control to move the cursor to the QUIT option. Press the ENTER button on the remote liontrol to exit and then remote the USB stick from the DVD player.

AV OUT (Signal to TV)

To connect the DVD player with a ‘IV set, ensure the channel selected to view on the N screen is the correct AV channel relating to the AV ports that the DVD player has been connected to.