Maxspect LS-060 Lagoon Series Smart Aquarium User Guide

Maxspect LS-060 Lagoon Series Smart Aquarium

Product Information

Specifications

• Cabinet Dimensions: H, D, C, G, E
• Door Panel: LED Light sold separately
• Display Tank: I
• Overflow Chamber Cover: F, B
• Sump: A
• Plumbing and Return Pump
• Integrated Control Center
• Gyre Flow Pump and Skimmer: MJ-GF2K, TD-6K, MJ-SK400
• Control Panel Power Supply (Backup)*
• Return Pump (Backup)*
• Return Pump Power Supply 1**
• Temp. Sensor 1
• Temp. Sensor 2
• Overflow Sensor
• Skimmer Overflow Sensor
• Protein Skimmer
• Gyre Flow Pump B
• Gyre Flow Pump A
• Refugium Light Power Supply 2***

Product Usage Instructions

Part One: Aquarium Installation

1. Start by setting up the cabinet with dimensions H, D, C, G, E.
2. Install the door panel. Note that the LED light is sold separately.
3. Set up the display tank with dimension I.
4. Cover the overflow chamber with the provided cover F, B.
5. Install the sump and cover the chamber with the sump cover A.
6. Connect the plumbing and return pump.
7. Set up the integrated control center.
8. Install the gyre flow pump and skimmer models MJ-GF2K, TD-6K, MJ-SK400.

Part Two: Equipment Connection

• When the main control system fails, connect the return pump and Power Supply 1 to the Return Pump (Backup) and Power Supply (Backup) sockets respectively.
• Contact your local retailer or manufacturer for after-sale service.
• Scan the QR code to download the Syna-G Cloud APP.

Part Three: Operation

Wi-Fi Connection

1. On either of the main interfaces, press and hold all three buttons for about 3 seconds to enter the setting interface.
2. Press the or button to switch to setting page 1 (Wi-Fi).
3. Press and hold the button for about 2 seconds until the Wi-Fi indicator starts to flash.
4. Open the Syna-G Cloud APP and follow the hints to connect the system.
5. Create an account and log in.
6. For Android platform, choose the Wi-Fi connection to which your mobile device is already connected and input the password.
7. When a fixture with the ID AT1-A1xxxxxx is shown on the list, it means that the fixture is connected to your mobile device successfully.

Turn On/Off the System

1. On either of the main interfaces, press and hold all three buttons for about 3 seconds to enter the setting interface.
2. Press the or button to switch to setting page 2 (OFF).
3. Press and hold the button for about 2 seconds until the display flashes for three times.
4. The system turns off and all the equipment stop working, but the Wi-Fi connection remains activated.
5. To turn on the system, press and hold all three buttons again for about 2 seconds.

Restore Factory Setting

1. On either of the main interfaces, press and hold all three buttons for about 3 seconds to enter the setting interface.
2. Press the or button to switch to setting page 3 (Reset).
3. Press and hold the button for about 2 seconds.
4. The system is restored to factory settings.

Part One: Aquarium Installation

Part Two: Equipment Connection

• When the main control system is failed, please first connect the return pump and Power Supply 1 to the Return Pump (Backup) and Power Supply (Backup) sockets respectively, now the Power Supply 1 only powers the return pump, the other equipment stops working. Then please contact local retailer or manufacturer for after-sale service.
• Power Supply 1 only powers the Return Pump and the main control system.
• Power Supply 2 Powers the rest equipment

Scan QR Code to download Syna-G Cloud APP

Part Three: Operation

Equipment Control

1. Press button can switch between the two main interfaces.
2. When in the main interface 1, press and hold button for about 2s to enter the setting interface, press the again button to switch among the equipment, press the － or ＋ button to set the value, then press and hold the button again for about 2s，or leave it for the 30s to save the setting and.
3. Protein Skimmer & Return Pump: you can set the working speed of the equipment on both the control panel and the Syna-G Cloud APP.
4. Refugium Light & Gyre Flow Pump: you can only turn on and off the light through the control panel, please use the Syna-G Cloud APP to get full access to the equipment.

Wi-Fi Connection

1. On either of the main interface, press and hold all three buttons for about 3s to enter the setting interface;
2. Press － or ＋ button to switch to setting page 1(WiFi)；
3. Press and hold button for about 2s until the WiFi indicator starts to flash, now the system is ready to be connected;
4. Open Syna-G Cloud APP to connect the system by following the hints; *
5. Create an account and log in; **
6. For Android platform, choose the WiFi connection to which your mobile device has already connected and input the password;
7. When a fixture with the ID “AT1-A1xxxxxx” s shown on the list, it means that the fixture is connected to your mobile device successfully.
8. Make sure your mobile device is connected to a 2.4GHz or 2.4GHz & 5GHz combined network, and turn on the Bluetooth signal and GPS positioning function at the same time.
9. Select a proper territory on the right upside of the login page while registering new account。

Turn On/Off the System

1.  On either of the main interface, press and hold all three buttons for about 3s to enter the setting interface;
2. Press － or ＋ button to switch to setting page 2(OFF)；
3. Press and hold button for about 2s until the display flashes three times, the system turns off and all the equipment stop working, however, the WiFi connection is still activated；
4. Press and hold all three buttons again for about 2s can turn on the system.

Restore Factory Setting

1. On either of the main interface, press and hold all three buttons for about 3s to enter the setting interface;
2. Press － or ＋ button to switch to setting page 3(Reset)；
3. Press and hold the button for about 2s, system is restored to factory setting after the display flashes three times.

Child Safety Lock

1. On either of the main interface, press and hold – & + buttons for about 2s to lock the buttons, however, you can still press the button to check out the equipment status.
2. Press and hold – & + buttons again for about 2s can unlock the buttons.

Water Exchange

1. Press and hold － & buttons for about 2s to enter water exchange mode, return pump, gyre flow pump and skimmer stop working;
2. The duration of water exchange can only be set through the APP, the equipment will not recover to its previous working status automatically after the time is up and the buzzer starts to beep;
3. Press and hold － & buttons again for about 2s can exit water exchange mode.

Feeding

1. Press and hold & ＋ buttons for about 2s to enter feeding mode, return pump keeps its working speed, skimmer and gyre flow pump slow down to 10% working speed；
2. The duration of feeding can only be set through the APP, the equipment will recover to its previous working status after the time is up；
3. Press and hold & ＋ buttons again for about 2s can exit feeding mode.

Scan QR Code to watch installation video

Frequently Asked Questions (FAQ)

Q: What are the dimensions of the cabinet?

A: The cabinet dimensions are H, D, C, G, E.

Q: Is the LED light included with the door panel?

A: No, the LED light is sold separately.

Q: How do I connect the return pump and power supply when the main control system fails?

A: Connect the return pump to the Return Pump (Backup) socket and Power Supply 1 to the Power Supply (Backup) socket.

Q: How do I connect the system to Wi-Fi?

A: Follow the instructions provided in the user manual to connect the system to Wi-Fi using the Syna-G Cloud APP.

Q: How do I turn off the system?

A: Press and hold all three buttons for about 3 seconds to enter the setting interface, switch to setting page 2 (OFF), and press and hold the button for about 2 seconds until the display flashes for three times.

Q: How do I restore the system to factory settings?

A: Press and hold all three buttons for about 3 seconds to enter the setting interface, switch to setting page 3 (Reset), and press and hold the button for about 2 seconds.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>