Lauben 200ST Grinder User Manual
- June 8, 2024
- Lauben
Table of Contents
Lauben Grinder 200ST
User manual
Specifications and Features
Model | LBNG200ST |
---|---|
Rated voltage range | AC220−240 V |
Frequency | 50/60 Hz |
Safety class (for electric shock protection) | II |
Power | 200 W |
SAFETY INSTRUCTION – GENERAL
PLEASE READ ALL THE INSTRUCTIONS BEFORE USING THE APPLIANCE. KEEP THIS MANUAL
FOR FUTURE REFERENCE.
THIS APPLIANCE IS DESIGNED ONLY TO BE USED IN HOUSEHOLDS.
-
Do not allow children or unauthorized people to handle the appliance. Keep it out of their reach.
-
Pay extra attention if the appliance is used near children.
-
Do not use the appliance as a toy.
-
The packaging contains small pieces, that can be dangerous for children. Always store the product out of reach of children. The bags may cause suffocation and the parts they contain are a choking hazard.
-
Do not allow the power cord to hang freely over the edge of the countertop.
-
Do not use the appliance outdoors or on a wet surface, there is a risk of electric shock.
-
Do not use any accessories other than those recommended by the manufacturer.
-
Do not use the appliance with a damaged cord or plug. Have it repaired immediately by an authorized service centre.
-
Keep the appliance away from heat sources such as radiators, ovens and other devices that produce heat and keep it out of direct sunlight.
-
Do not touch the appliance with wet hands.
-
When installing accessories, cleaning and maintaining or in the event of a malfunction, switch off the appliance and unplug it from the mains socket.
-
Do not switch on the appliance if the accessories are not properly fitted and without any food inside.
-
The appliance is only suitable for home use and is not intended for commercial use.
-
Do not immerse the power cord, plug or appliance in water or any other liquid.
-
Check the appliance and the power cord for damage regularly. Never switch on a damaged appliance.
-
Before cleaning and after using the appliance, switch the appliance off, unplug it from the mains and allow it to cool down.
-
Do not repair the appliance yourself. Contact an authorized service centre.
-
This appliance can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge only if they are supervised or have been instructed concerning the safe use of the appliance and understand the hazards involved. Do not let children play with the appliance.
-
This appliance is not designed to be operated using an external timer, remote control or any other component that switches the appliance automatically because there is a risk of fire if the appliance is covered or positioned incorrectly when the appliance is put into operation.
-
Do not use the appliance in any other way than as described in this manual.
-
Remove all the packaging and marketing materials from the appliance before first use.
-
Make sure the mains voltage corresponds to the values on the rating label of the appliance.
-
Do not leave the appliance unattended when it is switched on or connected to the mains.
-
Only place the appliance on a stable and heat-resistant surface away from other heat sources.
-
Care should be taken when handling the appliance if it contains hot food or water.
-
Do not touch the hot surface. Use handles and buttons.
-
Disconnect the appliance from the mains socket if it is not being used.
-
Be careful when opening the appliance lid to avoid scalding.
-
Observe a safe distance of the appliance from flammable materials such as furniture, curtains, blankets, paper, clothing, etc.
-
When disconnecting the unit from the mains socket, never pull the power cord, hold the plug and pull it out to disconnect it.
-
Allow adequate ventilation around the appliance when it is used.
-
Do not place any objects on the appliance.
-
Do not drop the appliance or subject it to severe shock.The product is covered by a two-year warranty, unless otherwise stated.
The guarantee does not apply to any damage caused by non-standard usage, mechanical damage, exposure to severe conditions or by handling it in contradiction to the manual recommendations, as well as damage caused by ordinary wear and tear. -
Neither the manufacturer, importer nor the distributor take responsibility for any damage caused by the assembly or incorrect usage of the product.
-
For pluggable equipment, the socket-outlet shall be installed near the equipment and shall be easily accessible.
IMPORTANT SAFETY INSTRUCTIONS
- The appliance is designed for grinding coffee beans, nuts without shells, herbs, poppy seeds and certain types of spices. Do not use it to grind excessively hard foodstuffs such as nutmeg, etc. or use it for purposes for which it is not intended.
- Do not wash the appliance (except for the lid) under running water and do not submerge it in water or any other liquid.
- The appliance is equipped with a safety mechanism that prevents it from being started when the lid is not properly attached.
- Do not use the appliance when empty, otherwise its service lifetime could be negatively impacted.
- The maximum continuous operating time of the appliance is 1 minute. After approximately 1 minute of operation, allow it to cool down for approximately 2 minutes.
- Always turn off the appliance and disconnect it from the power supply, if you will not be using it, if you are leaving it unsupervised, before filling or emptying the grinding bowl, before mounting or removing the lid and before cleaning. Do not remove the lid from the grinding bowl while the grinding blade is moving. Always wait until the blade comes to a completely standstill.
Attention: Improper use can lead to injury!
- Be especially careful when emptying the grinding bowl and when cleaning to prevent injury from the grinding blade.
- Do not disconnect the appliance from the power supply by pulling on the power cord. This could damage the power cord or the power socket. Disconnect the cord from the power supply by gently pulling on the plug of the power cord.
PRODUCT LAYOUT
Product may vary slightly from illustrations.
- Lid
- Blade
- Micro-switch
- Grinding bowl
- Unit base
- Socket
- Removeable power cord
BEFORE FIRST USE
- Remove the coffee grinder from the packing material.
- Take out the lid (no 1). Wash it under warm running water using kitchen detergent. Then rinse it with clean water and thoroughly wipe dry.
- Wipe the grinding bowl (no 4) and the grinding blade (no 2) with a clean cloth. Be careful of the sharp blade to avoid injury!
CLEANING AND MAINTENANCE
- Before cleaning, make sure that the coffee grinder is turned off, disconnected from the power supply and that the grinding blade (no 2) is not moving.
- Wash the lid (no 1) using warm water and kitchen detergent. Then rinse it with clean water and dry thoroughly with a soft cloth.
- Remove any remaining coffee grounds or remains of other foodstuffs that you processed from the grinding bowl (no 4). Thoroughly clean the grinding bowl (no 4) and the grinding blade (no 2) with a clean cloth and then wipe dry.
Attention: When cleaning the grinding blade (no 2), be very careful not to injure yourself on the sharp edge.
- Use a dry or slightly damp cloth for cleaning the unit base (no 5). Do not rinse it under running water or submerge it in water or any other liquid.
- Do not use thinners, solvents, or abrasive cleaning agents to clean the product.
USING THE COFFEE GRINDER
-
Take off the lid (no 1). Pour coffee beans into the grinding bowl (no 4). The grinding bowl (no 4) has a maximum capacity of 50g of coffee beans. Do not fill the grinding bowl (no 4) above the lip of bowl.
Attention: Do not use the coffee grinder to grind excessively hard foodstuffs such as nutmeg, etc.
Tip: You may also use the coffee grinder for grinding nuts, herbs, poppy seeds and certain types of spices. Shells must be removed from nuts before grinding. -
Place the lid (no 1) on to the grinding bowl (no 4).
-
Plug the power cord (no 7) into the socket (no 6) on the unit base (no 5).
-
Plug the coffee grinder into an electrical socket and start it by turning the lid so that it clicks into place. The coarseness of the ground coffee depends on the grinding time. The longer you grind it, the finer it will be.
Attention: The maximum continuous operating time is 1 minute. After 1 minute of continuous operation, allow the coffee grinder to rest for 2 minutes. This is 1 operating cycle. After 5 cycles, allow the coffee grinder to rest for 10-15 minutes to cool down, then it can be operated again. This method will prolong the product lifespan.
Tip: Always prepare your coffee from freshly ground coffee. Coffee that is ground in advance loses some of its flavour and aroma. -
To stop the coffee grinder, release the lid (no 1). Unplug the coffee grinder from the power socket. Make sure that the grinding blade (no 2) has stopped rotating. Then remove the lid (no 1). Pour out the coffee grounds into a suitable container.
-
Clean out the coffee grinder after each use according to the instructions in chapter “Cleaning and maintenance”.
-
The symbol on the product and in the documentation indicates that used electronics shall not be disposed of into communal waste. When disposing of appliances, take them to the designated waste collection yard, where they will be accepted for free. Proper disposal will help to preserve precious natural resources and protect the environment as well as public health, which both may get threatened by improper disposal and its consequences. For further detail contact the local authorities or the nearest waste collection yard. Improper disposal of electrical appliances may result in fining in compliance with state regulations.
Disposal information for users of electrical and electronic appliances (industrial use):
Disposal information for users of electrical and electronic appliances are to be asked for at and provided by the seller or supplier.
Disposal information for users of electrical and electronic appliances in countries outside of the European Union:
The disposal symbol stated above is valid only in the European Union. Disposal information for users of electrical and electronic appliances are to be asked for at and provided by the seller or supplier. All information is represented by the crossed container on the product, package and printed documentation. -
Please contact your dealer for warranty repairs. In case of technical problems and questions, please contact your dealer who will inform you of the next steps to be taken. Observe the rules for working with electrical equipment. The user is not authorised to disassemble the equipment or replace any of its components.
There is a risk of electric shock if the covers are opened or removed. Incorrect assembly and reconnection of the equipment also exposes you to the risk of electric shock.
The warranty period for the products is 24 months unless otherwise stated.
The warranty does not cover damage caused by non-standard use, mechanical
damage, exposure to harsh onditions, handling contrary to the manual and
normal wear and tear. The warranty period is 24 months for the battery and 6
months for its capacity. For more information on the warranty, please visit
www.elem6.com/warranty
Neither the manufacturer, importer nor distributor shall be liable for any
damage caused by the installation or improper use of the product.
EU Declaration of Conformity
elem6 s.r.o. hereby declares that the Lauben Grinder 200ST complies with the
essential requirements and other relevant provisions of Directive 2014/30/EU
and 2014/35/EU. All Lauben products are intended for sale without restriction
in Germany, the Czech
Republic, Slovakia, Poland, Hungary and other EU member states.
The full Declaration of Conformity can be downloaded from
www.lauben.com/support/doc
Import to EU
15, 16100 Praha 6, Czech Republic www.lauben.com
Manufacturer
TIGMON GmbH, Yorkstraße 22; 93049 Regensburg, Deutschland
Printing errors and changes in the manual are reserved.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>