Shenzhen Keshilian Electronic Technology KT05 Remote Control Instructions
- June 6, 2024
- Shenzhen Keshilian Electronic Technology
Table of Contents
KT05 manual for metal two key remote control
- Product parameters
- Main technical indicators
- Working voltage: DC 3V
- Working current: < 12mA
- Operating frequency: 433MHz
- Transmission power: 10MW
- Reference distance: 50m (no interference in open)
- Frequency deviation: ± 0.2MHz
- Transmission rate: 50-60khz
- Appearance dimension: 60 31 11mm
- Oscillation resistance: according to the needs of guests
- Coding method: 1527 learning code (the first key is)
- Battery model: cr2016 2
- Each remote control has an independent address code, so the remote controller is a separate individual, which will not cause mutual interference.
- Scope of application Home and shopping mall alarm; Electric vehicle, automobile, motorcycle alarm, various door, and window controller and other industrial control
2. instructions press the remote control key to turn on the LED light of the
remote control, and the code issuing is successful.
3. matters needing attention
- please follow the battery replacement in time when the remote control voltage is insufficient (when the battery voltage of remote control is insufficient, the distance of remote control will be closer generally).
- when using wireless electronic products, it is necessary to avoid metal masks, large-scale electronic equipment, electromagnetic field, and other strong interference sources, so as to avoid a short distance between the remote control and receiving or failure to work normally.
- do not use this electronic product abnormally. Abnormal use will reduce the performance and life of the product, and will damage the product seriously, and bring potential risks to your safety
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>