GE 2963129716 Cync Color and Indoor Plug Starter Kit Installation Guide
- June 4, 2024
- GE
Table of Contents
GE 2963129716 Cync Color and Indoor Plug Starter Kit
Installation set up
Let’s get plugged into what your Smart Plug + Smart Bulb can do together
- Schedule a scene to turn your light off at night. Go to CYNC App. Create a scene for your light and enable the schedule 1t to turn off at specific days and times.
- Turn on your desk fan and light on your way home from work. Go to the CYNC App and toggle on your Smart Bulb and Smart Plug.
- Can’t remember if you turned off the curling iron and bathroom light? Go to the CYNC App to check the state of your Smart Bulb and Smart Plug. Toggle off your Smart Bulb and Smart Plug to turn off devices away from home.
Connect to your Amazon Alexa or Google Assistant device to control your lights
and devices with your voice.
Try these commands:
- Hey Google, I’m home. Alexa, turn off the living room Alexa, good morning.
Smart Plug
FCC Compliance Statement Compliance Notice: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications that are not expressly approved by the manufacturer could void the user’s authority to operate the equipment.
RF Exposure Information:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. In order to avoid the possibility of exceeding the
FCC radio frequency exposure limits, human proximity to the antenna shall not
be less than 8 inches during normal operation.
RF Exposure Statement:
This equipment complies with IC RSS-102 radiation exposure limits set forth
for an uncontrolled environment. This transmitter must be installed to provide
a separation distance of at least 8 inches from all persons and must not be
collocated or operating in conjunction with any other antenna or transmitter.