Nikon 80453 Nikkor 85 mm f-3.5G ED VR Micro Prime Lens User Manual

Nikon 80453 Nikkor 85 mm f-3.5G ED VR Micro Prime Lens

Warranty Terms

Your Nikon equipment is guaranteed against any manufacturing defects for one full year from the date of original purchase. If during this period of guarantee the product proves defective due to improper material or workmanship, our authorized service network within the sales territory of Nikon Europe B.V. will, without charge for labor and parts, repair the product in the terms and conditions set as below. Nikon reserves the right (at its sole discretion) to replace or repair the product.

1. This warranty is only provided upon presentation of the completed warranty card and original invoice or purchase receipt indicating the date of purchase, product type and dealer’s name, together with the product.
   Nikon reserves the right to refuse free-of-charge warranty service if the above documents cannot be presented or if the information contained in it is incomplete or illegible.

2. This warranty will not cover:

   • necessary maintenance and repair or replacement of parts due to normal wear and tear.
   • modifications to upgrade the product from its normal purpose as described in user manuals, without the prior written consent of Nikon.
   • transport costs and all risks of transport relating directly or indirectly to the warranty of the products.
   • any damage resulting from modifications or adjustments which may be made to the product, without the prior written consent of Nikon, in order to comply with local or national technical standards in force in any other country than the ones for which the product was originally designed and/or manufactured.

3. The warranty will not be applicable in the case of:

   • damage caused by misuse including but not limited to failure to use the product for its normal purpose or according to the user instructions on the proper use and maintenance, and to installation or use of the product inconsistent with the safety standards in force in the country where it is used.
   • damage caused by accidents including but not limited to lightning, water, fire, misuse or neglect.
   • alteration, defacing, illegibility or removal of the model or serial number on the product.
   • damage resulting from repairs or adjustments which have been conducted by unauthorized service organizations or persons.
   • defects in any system into which the product is incorporated or with which it is used.

4. This service warranty does not affect the consumer’s statutory rights under applicable national laws in force, nor the consumer’s right against the dealer arising from their sales/purchase contract.

Before using this product, please carefully read both these instructions and the camera manual.
Note: This lens is intended exclusively for use with mirrorless cameras featuring a Nikon Z mount.

For Your Safety

To prevent damage to property or injury to yourself or to others, read “For Your Safety” in its entirety before using this product.
Keep these safety instructions where all those who use this product will read them.
WARNING: Failure to observe the precautions marked with this icon could result in death or severe injury.
CAUTION: Failure to observe the precautions marked with this icon could result in injury or property damage.
WARNING

• Do not disassemble or modify this product.

• Do not touch internal parts that become exposed as the result of a fall or other accident.
  Failure to observe these precautions could result in electric shock or other injury.

• Should you notice any abnormalities such as the product producing smoke, heat, or unusual odors, immediately disconnect the camera power source.
  Continued operation could result in fire, burns or other injury.

• Keep dry.
  Do not handle with wet hands.
  Failure to observe these precautions could result in fire or electric shock.

• Do not use this product in the presence of flammable dust or gas such as propane, gasoline or aerosols.
  Failure to observe this precaution could result in explosion or fire.

• Do not directly view the sun or other bright light source through the lens. Failure to observe this precaution could result in visual impairment.

• Keep this product out of reach of children.
  Failure to observe this precaution could result in injury or product malfunction. In addition, note that small parts constitute a choking hazard. Should a child swallow any part of this product, seek immediate medical attention.

• Do not handle with bare hands in locations exposed to extremely high or low temperatures.
  Failure to observe this precaution could result in burns or frostbite.

CAUTION

• Do not leave the lens pointed at the sun or other strong light sources.
  Light focused by the lens could cause fire or damage to product’s internal parts. When shooting backlit subjects, keep the sun well out of the frame.

• Do not leave the product where it will be exposed to extremely high temperatures, for an extended period such as in an enclosed automobile or in direct sunlight. Failure to observe this precaution could result in fire or product malfunction.

• Do not transport cameras or lenses with tripods or similar accessories attached. Failure to observe this precaution could result in injury or product malfunction.

Notice for Customers in Europe
This symbol indicates that electrical and electronic equipment is to be collected separately. The following apply only to users in European countries:

• This product is designated for separate collection at an appropriate collection point. Do not dispose of as household waste.
• Separate collection and recycling helps conserve natural resources and prevent negative consequences for human health and the environment that might result from incorrect disposal.
• For more information, contact the retailer or the local authorities in charge of waste management.

Using the Lens

Parts of the Lens: Names and Functions
Refer to the diagram on the left edge of this sheet.

1.Lens hood mounting mark| Use when attaching the lens hood.| Attach and removing the lens Hood
---|---|---
2. Control ring| Autofocus mode selected : In autofocus mode, you can rotate this customizable ring to per- form a function selected with the camera (see the camera manual for details).| —
Manual focus mode selected : Rotate to focus.| —
3. Lens mounting mark| Use when mounting the lens on the camera.| Attachment and Removal
4. Rubber lens-mount gasket| —| —
5. CPU contacts| Used to transfer data to and from the camera.| —
6. Focus-mode switch| Choose A for autofocus, M for manual focus.
Note that regardless of the setting chosen, focus must be adjusted manually when manual focus mode is selected using camera controls.| —
7. Lens hood| Lens hoods block stray light that would otherwise cause flare or ghosting. They also serve to protect the lens.| Attach and removing the lens Hood
8. Lens hood lock mark| Use when attaching the lens hood.
9. Lens hood alignment mark
10. Front lens cap| —| —
11. Rear lens cap| —| —

Attachment and Removal

• Attaching the Lens
  • Turn the camera off, remove the body cap, and detach the rear lens cap.
  • Position the lens on the camera body, keeping the mounting mark on the lens aligned with the mounting mark on the camera body, and then rotate the lens counterclockwise until it clicks into place.
• Removing the Lens
  • Turn the camera off.
  • Press and hold the lens release button while turning the lens clockwise.

Attaching and Removing the Lens Hood

Align the lens hood mounting mark (●) with the lens hood alignment mark (●) and then rotate the hood (w) until the ● mark is aligned with the lens hood lock mark ().
To remove the hood, reverse the above steps. When the Lens Is Attached
The focus position may change if you turn the camera off and then on again after focusing. Refocus before shooting. If you have focused on a pre-selected location while waiting for your subject to appear, we recommend that you do not turn the camera off until the picture is taken.

Precautions for Use

• Do not pick up or hold the lens or camera using only the lens hood.
• Keep the CPU contacts clean.
• Should the rubber lens-mount gasket be damaged, cease use immediately and take the lens to a Nikon-authorized service center for repair.
• Replace the front and rear lens caps when the lens is not in use.
• To protect the interior of the lens, store it out of direct sunlight.
• Keep the lens dry. Rusting of the internal mechanism can cause irreparable damage.
• Leaving the lens in extremely hot locations could damage or warp parts made from reinforced plastic.
• Rapid changes in temperature may cause damaging condensation inside and outside the lens. Before taking the lens from a warm to a cold environment or vice versa, place it in its case or a plastic bag to slow the change in temperature.
• We recommend that you place the lens in its case to protect it from scratches during transport.

Lens Care

• Removing dust is normally sufficient to clean the glass surfaces of the lens.
• Smudges and fingerprints can be removed from the lens surface using a soft, clean cotton cloth or lens cleaning tissue lightly dampened with a small amount of ethanol or lens cleaner. Wipe gently from the center outwards in a circular motion, taking care not to leave smears or touch the lens with your fingers.
• Never use organic solvents such as paint thinner or benzene to clean the lens.
• Neutral Color (NC) filters (available separately) and the like can be used to protect the front lens element.
• If the lens will not be used for an extended period, store it in a cool, dry location to prevent mold and rust. Do not store in direct sunlight or with naphtha or camphor moth balls.

Accessories

Supplied Accessories

• LC-62B 62 mm snap on Front Lens Cap
• LF-N1 Rear Lens Cap
• HB-90 Bayonet Hood
• CL-C1 Lens Case

Using the Lens Case

• The case is intended to protect the lens from scratches, not from falls or other physical shocks.
• The case is not water resistant.
• The material used in the case may fade, bleed, shrink, or change color when rubbed or wet.
• Remove dust with a soft brush.
• Water and stains can be removed from the surface with a soft, dry cloth. Do not use alcohol, benzene, thinner, or other volatile solvents or detergents.
• Do not store in locations exposed to direct sunlight or high temperatures or humidity.
• Do not use the case to clean the monitor or lens elements.
• Be careful that the lens does not fall from the case during transport.

Compatible Accessories

62 mm screw-on filters
Filters
Use only one filter at a time. Remove the lens hood before attaching filters or rotating circular polarizing filters.

Specifications

Nikon reserves the right to change the appearance, specifications, and performance of this product at any time and without prior notice.

aspherical elements, and elements with Nano Crystal Coat)
Angle of view|

• FX format: 47°
• DX format: 31°30’

Focusing system| Internal focusing system
Minimum focus distance| 0.4 m (1.32 ft)
Diaphragm blades| 9 (rounded diaphragm opening)
Aperture range| f/1.8 – 16
Filter-attachment size| 62 mm (P = 0.75 mm)
Dimensions| Approx. 76 mm maximum diameter × 86.5 mm (distance from camera lens mount flange)
Weight| Approx. 415 g (14.7 oz)

References

• Que Faire de mes Déchets ? Découvrez les solutions pour tous vos déchets et nos conseils pour en produire moins.
• Nikon | Service

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>