rizoma PTS321 Fox License Plate Support Kit User Manual
- June 8, 2024
- rizoma
Table of Contents
rizoma PTS321 Fox License Plate Support Kit
Welcome to Rizoma
Before you start
We are pleased to welcome you into the world of RIZOMA, and we congratulate
you for your excellent choice. Please carefully follow the instructions in
this guide, which will allow you to mount and use the product correctly and
enjoy all the features it has. For your protection and safety, RIZOMA
expressly recommends that you have the installation of the product performed
by skilled personnel. Improper installation, repair or maintenance, can cause
accidents. Keep this user guide as a reference for the future.
General conditions
Attention: This component comes assembled for shipping purposes only.
Tighten all fasteners to appropriate torque specifications before riding.
Descriptions preceded by this symbol contain information, instructions, or
procedures, which, if not followed, may result in death or serious injury.
-
Carefully read, understand and follow these instructions, they are an essential part of the product. If you have any doubt whatsoever regarding the installation or use of
your RIZOMA product, please see your authorized RIZOMA dealer for assistance (on www.rizoma.com). -
For correct installation, all tightening has to be done after the correct positioning of the accessories without restricting the moving parts, to not compromise the
correct functioning of the product. -
After installing any Rizoma product, please check that all related components of the motorbike function e.g. brakes, throttle, clutch, lights and steering. We strongly
suggest to repeat these checks periodically, especially after long trips or prolonged periods of not using the bike.
Your RIZOMA products require regular inspection and maintenance. The more you ride the more often you must inspect your RIZOMA products. If your products are leaking, bent, deformed, cracked, chipped or worn, no matter how slight, immediately have a RIZOMA dealer inspect the products before you ride again. In any case never try to repair or modify the Rizoma products or their components, always replace with Rizoma original components. Rizoma products may not be compatible with your motorcycle or with other aftermarket equipment installed before. For your safety Rizoma suggests to always contact your RIZOMA dealer.
Porta targa
This version of the license plate that can only be used with license plates of
small size (example USA-JAPAN..). Observe the minimum distance of 170 mm
between the license plate and the rear wheel (see STEP 6). Respect the
installation dimensions and don’t use other license plate supports as an
alternative to the one included to avoid interference between the license
plate and the wheel.
Improper installation could damage the electrical system of the motorcycle and
cause a fire, resulting in personal injury or death. Electrical shock hazard.
Disconnect the battery before starting to install turn license plate bracket
or rear light or the turn signals. The pins must always be isolated and
respect the polarity in the connections. The warrantee is not valid for any
electric wires cutting or any product modify or tampering.
REMOVE ORIGINAL LICENSE PLATE
INSTALL LICENSE PLATE
INSTALL UNIVERSAL LICENSE PLATE
INSERT WIRINGS
INSTALL LICENSE PLATE ON THE CHASSIS
ADJUSTMENT LICENSE PLATE
ATTENTION: ADJUST THE DISTANCE (MINIMUM DISTANCE 170-180 mm) BETWEEN THE LICENSE PLATE AND THE REAR WHEEL TO AVOID ANY CONTACTS BETWEEN THE LICENSE PLATE AND THE WHEEL, DURING THE MAXIMUM STROKE OF THE REAR SUSPENSION, TAKE CARE AT THE ADJUSTMENT OF THE LICENSE PLATE.
CONNECTIONS
WARNING :CONTROL THATIS THE BATTERY DSCONNECT
WARNING: FOR CORRECT INSTALLATION OF LICENSE PLATE LIGHT FOLLOW THESE STEPS: RESPECT THE POLARITY IN THE CONNECTIONS AND ALWAYS CHECK THAT THE TERMINALS ARE ISOLATED.
Warnings
RIZOMA reserves the right, in its sole discretion, to make changes to the
product and this information at any time and without prior notice. Although
many catalogs and advertisements depict riders engaged in extreme or stunt
riding, this activity is extremely dangerous, increases the risk of an
accident, and increases the severity of any injury. The action depicted is
performed by professionals under strictly controlled riding conditions. Only
you know the limits of your riding ability and only you can control the
conditions under which you ride. By and in consideration for his/her purchase
and use of the RIZOMA product, the user expressly recognizes and agrees that
in the event of any claim arising out of the use of this RIZOMA product,
whether such claim is based in contract, warranty, tort (personal injury or
wrongful death) or otherwise, the laws of the Republic of Italy shall apply
and jurisdiction and venue for any such action shall be in the Courts of Busto
Arsizio, Italy. All riders are strongly urged to take a motorcycle rider
safety clinic. Always wear a properly fitted and fastened motorcycle helmet
(RIZOMA recommends a full face helmet), that has been approved by ANSI ,
SNELL, CE, or any other relevant authority, and any other safety equipment
necessary for your riding style, such as full finger gloves, boots, and body
armor. Be sure to read and follow all the instructions and warnings that
originally accompanied your motorcycle, as well as the literature that
accompanied any other component parts installed on your motorcycle. Be sure
that your tires are inflated to the correct pressure and that there is no
damage whatsoever in the tread or sidewall of the tire.
Legal note
- Some of our products may not be approved for road circulation in the countries where homologation is required. Thus RIZOMA® srl declines any responsibility for a different use of its products.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>