avsl SF201 Fixed TV Wall Brackets User Manual
- June 8, 2024
- AVSL
Table of Contents
avsl SF201 Fixed TV Wall Brackets
These brackets are constructed from reinforced steel to allow a screen to be mounted on a wall safely. Designed to be easily installed and supplied with all required installation hardware.
| Model | SF201 | SF401 | SF601 |
|---|---|---|---|
| Screen size | 17″ – 42″ | 26″ – 55″ | 32″ – 65″ |
| Max. weight load | 20kg | 30kg | 35kg |
Caution:
Please read this manual thoroughly to avoid damage to property or personnel. If unsure of any part of this manual please refer to professional installer for help:
- This product contains small components that could pose a choking hazard if swallowed, please keep out of reach of
- This product is designed for mounting on wall studs or concrete wall. Always ensure the mounting surface will be capable of withstanding the combined weight of the TV bracket and TV, reinforcement may be required for aged or weak
- Safety gear such as gloves and safety goggles must be worn during the installation. A minimum of two people are required throughout the installation, failure to do so may result in injury or
- This product is design for indoor use only. The bracket must be inspected at least every two months for loose joints or aged parts
Contents:
Please check all contents listed below are included inside the box. If
anything is missing please return to the retailer or dealer
For this installation you will also require pencil, tape measurer, electric drill, stud finder and Philip (cross) screw driver.
Step 1 – Fixing wall bracket
For concrete wall Installation first of all work out the height of the
Installation and ensure It is level using the spirit level. Use a pencil to
mark where the mounting holes will be and use an electric drill to drill a
hole that is around 10mm in diameter and 50mm deep. Insert the wall plugs into
the holes and install the wall bracket as follows
For plaster wall installation first of all find out where the wood stud is behind the wall using a stud finder. Then work out the height of the installation and ensure it is level using the spirit level. Use a pencil to mark where the mounting holes will be and use an electric drill to drill a hole that is around 5mm in diameter and 50mm deep. Install the wall bracket as follows
Step 2 – Fixing 1V bracket to the screen, please use plastic spacer if the back of the screen is uneven.
Step 3 – Hook the 1V bracket on to the wall mount and gently rest the 1V
against the wall as shown below. Use a screw driver to fix the locking screw
In until the TV Is completely fixed to the bracket.
Errors and omissions excepted.
Copyright© 2019. AVSL Group Ltd.
129.540UK, 129.541UK &. 129.542UK User Manual
Fixed 1V Wall Brackets
Item ref: 129.540UK, 129.541UK & 129.542UK