LANCOM 1800EF Site Networking Via fiber Optics and Ethernet User Guide

SYSTEMS Hardware Quick Reference
LANCOME 1800EF

Mounting & connecting

1. Ethernet interfaces
   Use the cable with the kiwi-colored connectors to connect one of the interfaces ETH 1 to ETH 4  to your PC or a LAN switch.

2. WAN interface
   Use the cable with the green connectors to connect the WAN interface to your WAN modem.

3. SFP interface
   Insert a suitable LANCOM SFP module (e.g. 1000Base-SX or 1000Base-LX) into the SFP port. Choose a cable compatible with the SFP module and connect it as described in the SFP module’s mounting instructions www.lancom-systems.com /SFP-module-MI. SFP module and cable are not included.

4. USB interface
   Connect a USB data medium or a USB printer to the USB interface. (cable not supplied)

5. USB-C configuration interface
   A USB-C cable is required to configure the device (cable not supplied)

6. Power
   After connecting the cable to the device, turn the bayonet connector 90° clockwise until it clicks into place. Use only the supplied power adapter.

Before initial startup, please make sure to take notice of the information regarding the intended use in the enclosed installation guide! Operate the device only with a professionally installed power supply at a nearby power socket that is freely accessible at all times.
Please observe the following when setting up the device
→The power plug of the device must be freely accessible.
→ For devices to be operated on the desktop, please attach the adhesive rubber footpads →Do not rest any objects on top of the device
→Keep all ventilation slots on the side of the device clear of obstruction
→In case of wall mounting, use the drilling template as supplied
→Rack installation with the optional LANCOM Rack Mount (separately available)
→Please note that support service for third-party accessories is excluded.

LED description & technical details

➀ Power

and LANCOM Management Cloud (LMC) is accessible
Red/green, blinking| Configuration password not set. Without a configuration password,
the configuration data in the device is unprotected.
Red, blinking| Hardware error
Red, blinking slowly| Time or charge limit reached/error message occurred
1x green inverse blinking| Connection to the LMC active, pairingOK, device not claimed
2x green inverse blinking| Pairing error, resp. LMC activation code not available
3x green inverse blinking*| LMC not accessible, resp. communication error

➁ Online

➂ SFP

Off| SFP deactivated in the configuration or SFP module present, no connection
to network device
---|---
Red, permanently| SFP is enabled in the configuration but no SFP module present
Green, permanently| SFP module present, connected to the network exists, no data transmission
Green, blinking| Data transmission
Red, blinking| SFP module present, hardware error

➃ WAN

➄ ETH1 – ETH4

➅ VPN

➆ Reset

restart

**Hardware

**

Power supply| 12 V DC, external power adapter (110 or 230 V) with bayonet connector to secure against disconnection
---|---
Environment| Temperature range 0 – 40 °C; humidity 0 – 95 %; non-condensing
Housing| Robust synthetic housing, rear connectors, ready for wall mounting, Kensington lock; (W x H x D) 210 x 45 x 140 mm
Fan| 1 quiet fan

Interface

ex-factory to 3 ports can be switched as additional WAN ports.
USB| USB 2.0 Hi-Speed host port for connecting USB printers (USB print server), serial devices (COM-port servers), USB data media (FAT file system), or supported UMTS USB modems
SFP| Socket for small form-factor pluggable Gigabit-Ethernet transceiver (mini-GBIC). Compatible with optional LANCOM SFP modules for optical connections over short distances (SX) or longer distances (LX). Set as a LAN port ex-factory, can be configured as a WAN port.
Configuration interface| USB-C configuration interface

WAN protocols

Ethernet| PPPoE, Multi-PPPoE, ML-PPP, PPTP (PAC or PNS) and IPoE (with or without DHCP), RIP-1,
RIP-2, VLAN, IP
---|---

Package content

Cable| 2x Ethernet cables, 3m (LAN: kiwi-colored connector; WAN: green connector)
---|---
Power adapter| External power supply adapter (230 V), 12 V / 5 A DC/S; barrel / bayonet (EU),
LANCOM item no. 112112 (not for WW devices)

*) The additional power LED statuses are displayed in a 5-second rotation if the device is configured to be managed by the LANCOM Management Cloud.
This product contains separate open-source software components which are subject to their own licenses, in particular, the General Public License (GPL). The license information for the device firmware (LCOS) is available on the device‘s WEBconfig interface under “Extras > License information“. If the respective license demands, the source files for the corresponding software components will be made available on a download server upon request.
Hereby, LANCOM Systems GmbH | Adenauerstrasse 20/B2 | D-52146 Wuerselen, declares that this device is in compliance with Directives 2014/30/EU, 2014/35/EU, 2011/65/EU, and Regulation (EC) No. 1907/2006. The full text of the EU Declaration of Conformity is available at the following Internet
address: www.lancom-systems.com/doc

LANCOM, LANCOM Systems, LCOS, LAN community, and Hyper Integration are registered trademarks. All other names or descriptions used may be trademarks or registered trademarks of their owners. This document contains statements relating to future products and their attributes. LANCOM Systems reserves the right to change these without notice. No liability for technical errors and/or omissions. 112100/0622

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>