Nikon 05420057 AF-S NIKKOR 24mm f/1.86 ED User Manual

.NIKKOR
AF-S NIKKOR 24mm f/1.86 ED
User Manual

NIKON CORPORATION

Before using this product, please carefully read both these instructions and the camera manual.
Note: When mounted on a OX-format digital single-lens reflex camera such as the 07200 or 05500, this lens has an angle of view of 61° and a focal length equivalent to 36 mm (35 mm format).

For Your Safety

WARNINGS

• Donotdisassembleormodify. ln the event of malfunction, the product should be repaired only by a qualified technician. Should the product break open as the result of a fall or other accident, avoid touching exposed parts. Fail­ ure to observe these precautions could result in electric shock or other injury.

• Turn the camera off immediately in the event of malfunction. Should you notice smoke or an unusual smell coming from the equipment, immediately un­ plug the AC adapter and remove the camera battery, taking care to avoid burns. Continued operation could result in fire or injury. After removing the battery, take the equipment to a Nikon-authorized service center for inspection.

• Keep dry. Do not expose the product to water or handle with wet hands. Failure to observe this precaution could result in fire or electric shock.
  • Donotuseinthepresenceofflammablegas. Operating the equipment at filling stations or in the presence of propane or other flammable gas or dust could result in explosion or fire.

• Do not look at the sun through the lens or the camera viewfinder. Viewing the sun or other bright light source through the lens or viewfinder could cause permanent visual impairment.

CAUTIONS

• Keep out of reach of children. Failure to observe this precaution could result in injury or product malfunction.
• Do not focus sunlight through the lens. Sunlight focused through the lens could cause fire. When shooting backlit subjects keep the sun well out of the frame; if the lens will not be used for an extended period, replace the lens caps and store out of direct sunlight.
• Do not overheat. Do not leave the product in locations exposed to extreme­ ly high temperatures, such as in an enclosed vehicle in direct sunlight, or wrap the product in a towel or handkerchief or otherwise cover the product while it is in use. Failure to observe these precautions could result in fire or product malfunction.

Notice for Customers in Canada
CAN ICES-3 B I NMB-3 B

Parts of the Lens

1. Lens hood
2. Lens hood alignment mark
3. Lens hood lock mark
4. Lens hood mounting mark
5. Focus ring
6. Focus distance indicator
7. Focus distance mark
8. Lens mounting mark
9. Rubber lens-mount gasket
10. CPU contacts
11. Focus-mode switch

Compatibility

Check marks (“ “) indicate supported features, dashes (“-“) features that are not supported. Some limitations may apply; see the camera manual for details.

Camera| Exposure (shooting) mode|
---|---|---
p4| s| A| M| AF5
Nikon FX-format and OX-format digital single- lens reflex cameras| | | | |
F6, FS, F1 00, F/N80-series¹, F/N75-series¹,F /N65-series¹, Pronea 600i/6i¹, Pronea S¹| | | | |
F4-series, F90X/N90s¹, F90-series/N90¹, F70-series/N70¹| | | –| –|
F60-series/N60¹, FIN 55-series¹, F50-eries/N50¹, F-401 x/N5005¹, F-401 s/N4004s¹, F-401 /N4004¹| | | | | –
F-80 1 s/N8008s¹, F-80 1 /N8008¹, F-60 1 M/N6000¹| | | –| –| –
F3AF, F-601 /N6006¹, F-501 /N2020³, Nikon
manual focu s cameras (excluding F-601 M/N6000¹)| –

1. N-series cameras and Pronea 6i sold in U.S. A. only.
2. Exposure modeM (manual) not available.
3. N2020 sold in U.S. A. and Canada only.
4. Includes AUTO and scene (Digital Vari -Program) modes.
5. Autofocus.

Focus

Supported focus modes are shown in the following table (for information on camera focus modes, see the camera manual).

Nikon FX-format and OX-format
digital single-lens refle x cameras,
F6, F5, F4-series, F100, F90X/N90s ”
F90-series/N90 “, F /N80-series “,
F /N 7 5-series , F70-series/N70 “,
F /N65 -series , Pronea 600i/6i “,
Pronea S| AF| Autofocus with manual override| Manual focus with electronic rangefinder
MF| Manual focus (electronic rangefinder available with all cameras except F-601 M/ N6000″)
F60-series/N60 , F /N55-series ,
F 50-series/N50 ·, F-80 1 s/N8008s “,
F-801 /N8008 “, F-601 M/N6000 ,
F-40 1 x/N5005 , F-40 1 s/N4004s “,
F-40 1 /N4004 *| AF, MF

• N-series cameras and Pronea 6i sold in U. S. A. only.

MIA (Autofocus with Manual Override)
To focus using autofocus with manual override (M/ A):

1. Slide the lens focus-mode switch to M/ A.
2. Focus.
   If desired, autofocus can be over-ridden by rotating the lens focus ring while the shutter-release button is pressed halfway (or, if the camera is equipped with an AF-ON button, while the AF-ON button is pressed). To refocus using autofocus, press the shutter-release button halfway or press the AF-ON button again.

Depth of Field

The depth-of-field indicators on the lens show the approximate depth of field. If the camera offers depth-of-field preview (stop down), depth of field can also be previewed in the viewfinder. See the depth of field table for more information.
Note: Note that the focus distance indicator is intended only as a guide and may not accurately show the distance to the subject and may, due to depth of fteld or other factors, not show ∞ when the camera is focused on a distant object.

•Aperture
Aperture is adjusted using camera controls.
• The Lens Hood
The lens hoods protect the lens and block stray light that would otherwise cause flare or ghosting.

Attaching the Hood

Align the lens hood mounting mark ( ) with the lens hood alignment mark ( ) and then rotate the hood (2) until the  mark is aligned with the lens hood lock mark (- ).

When attaching or removing the hood, hold it near the symbol on its base and avoid gripping it too tightly. Vignetting may occur if the hood is not correctly attached.
The hood can be reversed and mounted on the lens when not in use.

Focusing Screens

The following cameras support a variety of focusing screens for use in dif­ferent situations.

: Recommended.
: Vignetting visible in viewfinder (photographs are not affected).
-: Not compatible with camera.
( ):  Figures in parentheses give the exposure compensation for cen­ ter- weighted metering. Select “Other screen” for Custom Setting b6 (“Screen comp.”) when adjusting exposure compensation for the F6; note that with screens other than B or E, “Other screen” must be selected even when the value for exposure compensa­ tion is 0. Exposure compensation for the FS can be adjusted using Custom Setting 18; see the camera manual for details.

Empty cell: Not suited to use with this lens. Note that type M screens can however be used for photomicrography and macro photography at magnifications of 1 : 1 or higher.
Note: The F5 supports matrix metering with A, g E EC-8/EC-E J, and L focusing screens only.

Lens Care

• Do not pick up or hold the lens or camera using only the lens hood.
• Keep the CPU contacts clean.
• Should the rubber lens-mount gasket be damaged, cease use immedi­ ately and take the lens to a Nikon-authorized service center for repair.
• Use a blower to remove dust and lint from the lens surfaces. To remove smudges and fingerprints, apply a small amount of ethanol or lens cleaner to a soft, clean cotton cloth or lens-cleaning tissue and clean from the center outwards using a circular motion, taking care not to leave smears or touch the glass with your fingers.
• Never use organic solvents such as paint thinner or benzene to clean the lens.
• The lens hood or NC filters can be used to protect the front lens element.
• Attach the front and rear caps before placing the lens in its lens case.
• If the lens will not be used for an extended period, store it in a cool, dry location to prevent mold and rust. Do not store in direct sunlight or with naphtha or camphor moth balls.
• Keep the lens dry. Rusting of the internal mechanism can cause irrepa­ rable damage.
• Leaving the lens in extremely hot locations could damage or warp parts made from reinforced plastic.

Supplied Accessories

• 72 mm snap-on Front Lens Cap LC -72
• Rear Lens Cap LF-4
• Bayonet Hood HB-76
• Lens Case CL-1 015

Compatible Accessories

• 72 mm screw-on filters

Specifications

aspherical lens elements, and lens elements with Nano-Crystal coatings)
Angle of view|  • Nikon film SLR and EX-format D-SLR cameras: 84°
• Nikon DX-format D-SLR cameras: 61°
Distance information| Output to camera
Focusing|  Rear Focusing (RE) System with autofocus con-trolled by Silent Wave Motor and separate focus ring for manual focus
Focus distance indicator|  0.23 m to infinity (∞)
Minimum focus distance|  0.23 m (0.75ft) from focal plane
Diaphragm blades| 7 (rounded diaphragm opening)
Diaphragm|  Fully automatic
Aperture range| f/1.8-16
Metering| Full aperture
Filter-attachment size|  72 mm (P = 0.75 mm)
Dimensions| lApprox. 77.5 mm maximum diameter x 83.0 mm (distance from camera lens mount flange)
Weight| Approx. 355 g (12.6 oz)

Nikon reserves the right to change the specifications of the hardware described in this manual at any time and without prior notice.
Retain this International Warranty with proof of purchase (bill of sale) for your records
Nikon Corp. LENS ONE YEAR WORLDWIDE LIMITED WARRANTY
(Excluding the Continental United States, Alaska, Hawaii, Puerto Rico, and U.S. Virgin Islands)
Welcome to the worldwide family of Nikon owners.
Your Nikon equipment has been manufactured to the highest quality standards by NIKON CORPORATION, Tokyo, Japan. This limited warranty entitles the original consumer purchaser to international warranty protection in accordance with these terms and conditions. It affords the original consumer purchaser warranty protection outside the Continental United States, Alaska, Hawaii, Puerto Rico and the U.S. Virgin Islands. Such warranty coverage is supplemental to and not in lieu of the United States
Nikon Inc. Lens One Year USA Limited Warranty which is received by the original consumer purchaser with the Nikon product.
The Nikon product except for batteries is warranted by NIKON CORPORATION, Tokyo, Japan to be free from defects in materials or workmanship for a period of one (1)year from the date of purchase. To find an international Nikon Service Facility see: http://imaging.nikon.com/products/imaging/worldwide/index.htm. During this period any one of the international service facilities will service without charge any parts or assembly of parts found to be defective in materials or workmanship, subject to the following limitations and exclusions:

1. This warranty extends to the original consumer purchaser only and is not assignable or transferable.
2. This warranty shall not extend to any product which has been subject to misuse, alteration, abuse, negligence, accident or unauthorized repair or has had its serial number altered or removed.

The above warranty is expressly in lieu of all other warranties expressed or implied including but not limited to any implied warranty of merchantability or fitness for particular purpose, except to the extent prohibited by applicable law, in which event the duration of any implied warranty shall be limited to one (1) year from the date of purchase or such longer period as may be required by applicable law. Under no circumstances shall Nikon be liable for consequential, indirect, special, direct, exemplary, punitive or incidental damages arising out of or related to any breach of this warranty or any other claim regarding this product, including but not limited to, claims of negligence, strict liability or breach of contract. Some jurisdictions, such as states or provinces, do not allow (a) limitations on how tong an implied warranty lasts or (b) the exclusion or limitation of incidental or consequential damages so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from jurisdiction to jurisdiction.
In order to obtain international service, the original consumer purchaser should return the Nikon product, either in person or addressed to the Warranty Department of any authorized service facility listed on the above website, together with proof of purchase and proof of purchase date (bill of sale) and this warranty. The original consumer purchaser in returning this product must prepay all shipping and insurance costs to the service facility.

References

• toc.us domain name is for sale. Inquire now.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>