CARTONI H513 C20S Fluid Heads User Manual

: June 8, 2024
: CARTONI

Table of Contents

CARTONI H513 C20S Fluid Heads User Manual
1. Safety & Set-Up Introduction
2. Operating Elements
3. Procedures
4. Specifications
5. Maintenance
6. Warranty
7. Accessories & product line
- References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

CARTONI H513 C20S Fluid Heads User Manual

CARTONI H513 C20S Fluid Heads.jpg

FIG 1 Certificate.jpg

FIG 2 Certificate.jpg

1. Safety & Set-Up Introduction

Thank you for choosing CARTONI.

The C20 S is a heavy-duty action Fluid Head with a broad range of payloads from 7 kg (15 lbs) to 35 kg (77 lbs) specifically designed to provide an extremely stable support for standard EFP, Studio/Broadcast or Film configurations.

Rugged but easy to operate this Fluid Head has all the ergonomic settings at the right place. The C20 S features 3 award winning fluid damping modules assuring outstanding drag levels and extraordinary smoothness in both pan and tilt modes.

Movements can be selected with 7 precisely repeatable steps of drag, while free-wheeling is available by simply setting the drag selector ring into position “0”. Counterbalance is activated by an easy grip selector in 7 progressive steps and “0”.

Positive locks, wide range sliding platform incorporating the European style quick release plate, a switchable illuminated spirit level completes the operating specs.

The C20S weighs 6.5 kg (14.3 lbs) thanks to the extensive use of extremely lightweight magnesium alloys.

It interfaces with all 100 mm bowl base tripods and in the optional C20 S/150mm version, it interfaces with all 150 mm bowl base Tripods and with Pedestals through the standard Vinten 4 bolts.

Before using the product read this user manual.
Before installing the Fluid Head on the Tripod check the Tripod stability.
Verify that the Camera payload (including lenses and accessories) is lower than the maximum capacity of the Fluid Head.
Before installing the Camera make sure that the Fluid Head is in good conditions and bares no evident damages.
Verify that the Camera payload (including lenses and accessories) is lower than the maximum capacity of the Fluid Head.
Do not attach heavy items to the Pan bars.
The Pan and Tilt locks should be applied whenever the Camera is left unattended on the Fluid Head & Tripod.
Always remove the Camera from the Fluid Head before transporting.

2. Operating Elements

FIG 3 Operating Elements.JPG

FIG 4 Operating Elements.JPG

3. Procedures

FIG 5 Procedures.JPG

FIG 6 Procedures.JPG

4. Specifications

FIG 7 Specifications.JPG

5. Maintenance

With indoor use – when needed – just clean the C20 S and Tripod with a soft cloth. Dirt accumulated during storage may be removed using a brush or Air spray.

CARTONI products main mechanisms are sealed as they are also built for professional outdoor use.

However, use under rough conditions will require special care. Salt water is very corrosive and can cause extreme damages. In atempt to avoid further damage the Fluid Head should be washed off with fresh water at the earliest opportunity and dried before storage.

Sand and dirt are abrasive and should be removed using a semi-stiff brush or Air spray.

Disconnect the illuminated spirit level battery during long term storage.

6. Warranty

All CARTONI Fluid Heads & Pedestals have a free of charge three (3) year warranty. Register your product at www.cartoni.com within 30 days from date of first purchase/invoice to receive further two (2) year warranty for the unsurpassed free five (5) year warranty.

Tripods, spreaders, dollies and all accessories are guaranteed one (1) year from the date of first purchase/invoice.

CARTONI warrant that the product supplied will – under proper use – be free from defects in workmanship and materials and agrees that it will, at its option, either repair or replace any defective part within duration of warranty from date of first purchase with no labour charge.

This warranty does not apply to any CARTONI product that has been damaged in shipping or handling, abused, misused, operated contrary to instructions for use, neglected, normal wear or tear, modified or changed in design or construction or serviced by unauthorized parties.

Repairs or misuse by any unauthorized parties will void this warranty.
Warranty claims must be submitted – in writing – to the factory for verification or to an authorized distributor/dealer designated by CARTONI.

It is the end user’s responsibility when ordering to ensure that the products ordered conform to his requirements.

All freight of product to CARTONI must be prepaid. All implied warranties are limited to the time period set forth herein & subject to change without notice.

No liability can be accepted for any variation.