THOMSON AIO23I 23.8 Inch Smart Monitor User Manual
- June 9, 2024
- THOMSON
Table of Contents
USER’S MANUAL
AlO – 23.8″
VERSION 1.0 – O719
AIO23I 23.8 Inch Smart Monitor
Thank you for choosing a Thomson Computing device. lo ensure that you are fully satisfied with your device, we invite you to read the information in this user manual.
Legal Notice
Commercial brand
This product has been manufactured and sold under the responsibility of
METAVISIO. THOMSON, and the THOMSON logo are trademarks used under license by
METAVISIO – further information at www.thomson-brand.com.
Microsoft®, Windows®, Windows Server® and Windows Vista® are registered
trademarks of Microsoft Corporation in the United States and/or other
countries/regions. The software names in this Users Guide are the property of
their respective companies in accordance with the corresponding license
agreement. Any reference to this software is given for information. only. All
other products, services, companies, trademarks, trade or product names and
logos referenced herein are the property of their respective owners. Any
reference to these names is for information purposes only.
Copyrights
Copyright in this User Guide is held by METAVISIO SA It is prohibited to copy,
translate, modify or transmit this User Guide by any means or in any format
whatsoever without the prior written consent of METAVISIO SA .
Disclaimer of liability
For a better user experience, METAVISIO SA reserves the right to make changes
to this User Manual. The information contained in this document is subject to
change without notice. Users are responsible for any damage resulting from
improper use of this User Guide. In addition, except for the explicit
warranty given in the product maintenance manual or in our service commitment,
METAVISIO SA makes no warranty, express or implied, related to this User
Guide (including on the formulations chosen).
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Important safety instructions
This unit should be used in an environment with an ambient temperature between
5°C (41°F) and 35°C (95°F).
Do not expose the unit to rain or moisture and keep it away from liquids. In
case of splashing water or other liquid on the unit, immediately switch off
the unit and wait until it is completely dry before turning if on again.
Do not expose the device directly to solar radiation
Do not use strong solvents, liquid detergents or other chemicals on or near
the surface of the unit to prevent corrosion or deterioration of the surface
of the unit.
Do not expose the camera to a dusty environment.
Do not use the unit during a gas leak.
Do not expose the device to strong magnetic or electric fields. You can run
the device through airport x-ray detectors. However, if is recommended not to
pass your device through the magnetic detection portals or expose it to
portable detectors.
Do not place any objects on the device.
Do not place the unit on an uneven or unstable surface.
Make sure to protect the unit from falls or any other impact that may damage
it.
Do not leave the appliance on or loaded on your lap or any other part of your
body to avoid any risk of heat-related injuries.
Switch off the unit before transporting it or covering it with a material that
does not allow optimal air circulation.
Do not use damaged power cords, accessories or other devices with your device.
We recommend the exclusive use of the accessories (bower supply, cables, etc.)
supplied with the unit.
Use only original batteries. Replacing the battery with an incorrect battery
can cause an explosion risk.
Do not disassemble, modify or repair the unit yourself, as this may void the
warranty.
Please back up your important content regularly to avoid data loss.
Our company accepts no responsibility for the loss or removal of items
contained in the device due to improper use of the hardware or software, lack
of maintenance or any other accidental event.
This product has been designed to allow proper recycling of parts and components. The symbol representing a crossed-out wheeled bin indicates that the device should not be disposed of with municipal waste. Consult local regulations for disposal of electronic devices.
The symbol representing a crossed-out wheeled bin indicates that the battery should not be disposed of with municipal waste. Consult local regulations for battery disposal.
To avoid possible hearing damage, do not listen to high sound levels for long periods of time.
Presentation of the device
Front view
Rear view
Bottom view
Note : The presentation of the device and some features may vary by
country, model or version.
Front view
-
Screen
Rear view -
Restart
-
Power button
A long press of this button allows you to turn your device on or off -
Storage Expansion
1x HDD / SSD 2.5″ SATA III slot (Maximum thickness 7mm) -
USB port type A(3.0)
This port is compatible with USB devices such as a keyboard, mouse, flash drive (USB sticks, memory card readers…), external hard disk, printer. -
USB port type A(2.0)
This port is compatible with USB devices such as a keyboard, mouse, flash drive (USB sticks, memory card readers…), external hard disk, printer. -
RJ45 port
-
Headset/microphone socket
Use this port to connect external speakers or headphones to your device. You can also connect headphones with an external microphone. -
Mains power port
This port provides power when connected to an adapter. -
HDMI port (High – Definition Multimedia Interface)
This port allows you to connect your device to an HDMI-compatible device such as a TV, monitor or projector.
Bottom view -
Micro-SD card reader
The micro-SD card reader allows you to read or write to micro-SDHC / micro- SDXC memory cards. -
USB port type A(2.0)
-
The Kensington security slot
The Kensington security slot (also known as Kensington lock, or K-lock) is part of an anti- theft system developed by Kensington Computer Products Group. It is a small rectangular hole reinforced around the edges. It is intended to accommodate a plug-in system associated with a padlock, then connected to a cable that must be fixed around a fixed object, or difficult to move.
Switching on
Note : Charge your Thomson device before using if for the first time.
Charging the battery of your device
Connect the AC adapter to an earthed electrical outlet.
WARNING :
Read carefully the following instructions concerning the battery of your
THOMSON device:
- Only a technician authorized by Thomson is authorized to remove and handle the battery.
- The battery in your Thomson device may present a fire or burn hazard if it is removed or disassembled.
- Comply with the information on the devices warning labels to avoid any risk of injury.
- There is a risk of explosion if the battery is replaced by an incorrect model.
- Do not dispose of the battery in a fire.
- Do not attempt to short-circuit the battery of the Thomson camera.
- Do not attempt to disassemble the battery or reassemble the battery.
- Stop using the battery if it leaks.
- The battery and its components must be recycled or disposed of properly.
- Keep the battery and its components out of reach of children.
Turning your device on / off
Turn on your device by pressing and holding the power button for a long time.
To turn off your device, go to the Start menu and select Start/Stop > Stop.
First start of your device
During the first boot, the Windows® 11 operating system will guide you through
the configuration steps.
Once these configuration steps are completed, the system completes the
installation and applies your customized settings. Do not turn off the unit
and ensure that there is sufficient battery power during this step.
The Windows® 11 home screen appears after installation and configuration is
complete.
Note : [f you want to restore the factory configuration or reinstall your operating system, we recommend using the Windows Reset function. For this reason,
- Open the start menu and choose «Settings».
- Select «Update and Update and Security» then «Recovery» from the Right menu.
- Click on the «Start button in the «Reset this PC» section.
- Let us guide you.
Using the keyboard
Function keys
The keypad on your device is equipped with function keys for performing
actions or settings.
Note : The key icons displayed and the functions offered may vary depending on the model.
Fn + Put the computer into standby mode
Fn + Opens the default web browser
Fn + Enables or disables the touchpad
Fn + Lower the volume level
Fn + Increases the volume level
Fn + Enables or disables sound
Fn + Opens the default media player
Fn + Media player playback or pause function
Fn + Previous music or video
Fn + Next music or video
Fn + Decreases the brightness of the screen
Fn + Increases the brightness of the screen
Fn + Opens the default email software
Fn + Enables the use of an external display
Fn + Opens the settings menu
Fn + Opens the search pane
Fn + Enables / Disables the wireless network
Fn + Displays applications running at runtime
Fn + Opens the sharing pane
Fn + Vertical scrolling upwards
Fn + Vertical scrolling down
Fn + Start function
Fn + Fine function
Fn + Activate or deactivate the keyboard backlight
Pause Cancels the current program (example: a game)
PrtScr/ Saves a screenshot of your Impécr screen
Numlck/ Enables/disables the numeric VerrNum keypad
SerLk Enables/disables scrolling
Ins Enables/disables the Refresh mode
Shortcut keys
Using the shortcut keys makes it easier to navigate under Windows® 11.
| | Open or close Start.
---|---|---
| +A| Open Quick Settings.
| +C| Open Chat from Microsoft Teams.
| +D| Display and hide the desktop.
| +E| Open File Explorer.
| +G| Open Xbox Game Bar when a game is open.
| +I| Open Settings.
| +L| Lock your PC or switch accounts.
| +M| Minimize all windows.
| +P| Choose a presentation display mode.
| +S| Open search.
| +T| Cycle through apps on the taskbar,
mythomson.com
MANUAL AIO24_EN_FR_SP_DE – FCC.indd 31
28/11/2022 10:33:27
28/11/2022