ASUS Q21362 Remote Management LAN Card IPMI Expansion Card User Guide

: June 9, 2024
: Asus

Table of Contents

ASUS Q21362 Remote Management LAN Card IPMI Expansion Card
Product specifications
Product Features
Jumper configurations
Installing the IPMI expansion card
FCC Compliance Information
Warranty
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ASUS Q21362 Remote Management LAN Card IPMI Expansion Card

ASUS Q21362 Remote Management LAN Card IPMI Expansion
Card

Product specifications

Chipset	ASPEED VIDEO PROCESSOR AST2600A3-GP
Interface	PCIe 3.0 x1 interface
VGA	1 x D-sub supports max. resolution 1920 x 1200 @ 60Hz
External connectors	1 x D-Sub

1 x LAN (RJ45) port

Internal connectors| 8 x fan headers

1 x 6-pin PSU connector 1 x BMC header

1 x LAN IP mode switch jumper 1 x SMART_PSU switch jumper 1 x PM_BUS header

1 x USB 2.0 connector 1 x VGA header

1 x Panel header(links to PWR/RST header of motherboard and chassis) 3 x T-sensor headers

1 x BMC switch jumper 1 x VGA switch jumper 1 x LOC switch jumper

1 x BMC Indicator LED

Accessories| 1 x BMC cable

1 x Low profile bracket 1 x Power On/Off cable 1 x Reset cable

1 x USB 2.0 cable

1 x User guide

Operating System| Windows® 10 – 64 bit, Linux OS including Cent OS, Redhat, and Ubuntu
Dimensions| 6.4 inch x 2.7 inch (162mm x 68.95mm )

Product Features

ASUS Q21362 Remote Management LAN Card IPMI Expansion
Card-1

RTL8211F-CG 1G LAN connector

Onboard VGA header
VGA connector
Fan headers 1-8
PANEL header (connects to motherboard and chassis PANEL to control power/reset functions)
T_SENSOR headers 1-3 (for temperature measuring)
BMC header (connects to motherboard BMC header)
USB header (connects to motherboard USB 2.0 front header)
PSU PM_BUS header (connects to power supply)
6-pin PSU connector (connects to PCIE power +12V)
VGA switch jumper (to turn on/off the display; default set to On)
LOC switch jumper (keeps heartbeat LED lit up)
BMC switch jumper (turns on/off the BMC card)
SMART_PSU switch jumper (controls alert)
LAN IP mode switch jumper (controls LAN IP – Dynamic/Fixed(10.10.10.10))

Jumper configurations

ASUS Q21362 Remote Management LAN Card IPMI Expansion
Card-2

Installing the IPMI expansion card

The cables connectors are notched to fit in only one orientation. Do not force the cable connectors onto the board headers/connectors in the incorrect orientation.

(on selected models) Connect the BMC cable to the BMC header (BMC_HEADER) on the IPMI expansion card and the BMC header on your motherboard.
Only connect this header if your motherboard features a BMC_HEADER header, please refer to the user manual that came with your motherboard package for more details.
To supply the IPMI expansion card with power, connect the USB 2.0 cable to the USB connector (USB) on the IPMI expansion card and the USB 2.0 connector on your motherboard.
Connect the Power On/Off cable and Reset cables to the MB pins on the Panel header (PANEL) on the IPMI expansion card then connect them to the Panel header on the motherboard. Ensure the cables are connected such that the red cable is closest to the PCB.
The Power On/Off cable and Reset cable are connected in opposite orientations when connecting them to the Panel header on your motherboard. For more information on the pin definitions of the Panel header on your motherboard, please refer to your motherboard’s user guide.
Connect the Power On/Off cable and Reset cables from the chassis to the CHA pins on the Panel header. Ensure the cables are connected such that the red cable is closest to the PCB.
CHA pins
This board features three (3) T-Sensor headers (T_SENSOR) which allow you to connect T-sensor cables for temperature monitoring functions.
Connect the PMBus connector from the PSU to the PSU PM_BUS header (PSUSMB) for monitoring information on the PSU such as voltage, current, and temperature.
Connect the 6-pin PCIE power connector from the PSU to the 6-pin PSU connector (PCIE_PWR).
Insert the IPMI expansion card to a PCIe slot on your motherboard.

For more information on the IPMI card, you can scan the QR code for the user manual:

Notices

Safety Precautions
Accessories that came with this product have been designed and verified for the use in connection with this product. Never use accessories for other products to prevent the risk of electric shock or fire.

FCC Compliance Information

Responsible Party: Asus Computer International
Address: 48720 Kato Rd., Fremont, CA 94538, USA
Phone / Fax No: (510)739-3777 / (510)608-4555

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Declaration of compliance for product environmental regulation
ASUS follows the green design concept to design and manufacture our products, and makes sure that each stage of the product life cycle of ASUS product is in line with global environmental regulations. In addition, ASUS disclose the relevant information based on regulation requirements.
Please refer to http://csr.asus.com/Compliance.htm for information disclosure based on regulation requirements ASUS is complied with:

EU REACH and Article 33
Complying with the REACH (Registration, Evaluation, Authorisation, and Restriction of Chemicals) regulatory framework, we published the chemical substances in our products at ASUS REACH website at http://csr.asus.com/english/REACH.htm.

EU RoHS
This product complies with the EU RoHS Directive. For more details, see http://csr.asus.com/english/article.aspx?id=35

India RoHS
This product complies with the “India E-Waste (Management) Rules, 2016” and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls (PBBs) and polybrominated diphenyl ethers (PBDEs) in concentrations exceeding 0.1% by weight in homogenous materials and 0.01% by weight in homogenous materials for cadmium, except for the exemptions listed in Schedule II of the Rule.

ASUS Recycling/Takeback Services
ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for you to be able to responsibly recycle our products, batteries, other components as well as the packaging materials. Please go to http://csr.asus.com/english/Takeback.htm for detailed recycling information in different regions.

DO NOT throw the motherboard in municipal waste. This product has been designed to enable proper reuse of parts and recycling. This symbol of the crossed out wheeled bin indicates that the product (electrical and electronic equipment) should not be placed in municipal waste. Check local regulations for disposal of electronic products.

DO NOT throw the mercury-containing button cell battery in municipal waste. This symbol of the crossed out wheeled bin indicates that the battery should not be placed in municipal waste.

Australia statement notice
From 1 January 2012 updated warranties apply to all ASUS products, consistent with the Australian Consumer Law. For the latest product warranty details please visit https://www.asus.com/support/. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
If you require assistance please call ASUS Customer Service 1300 2787 88 or visit us at https://www.asus.com/support/.

Warranty

ASUS Guarantee Information

ASUS offers a voluntary manufacturer’s Commercial Guarantee.
ASUS reserves the right to interpret the provisions of the ASUS Commercial Guarantee.
This ASUS Commercial Guarantee is provided independently and in addition to the statutory Legal Guarantee and in no way affects or limits the rights under the Legal Guarantee.

For all the guarantee information, please visit https://www.asus.com/support.

ASUS contact information
ASUSTeK COMPUTER INC.
Address: 1F., No. 15, Lide Rd., Beitou Dist., Taipei City 112
ASUS COMPUTER INTERNATIONAL (America)
Address: 48720 Kato Rd., Fremont, CA 94538, USA
ASUS COMPUTER GmbH (Germany and Austria)
Address: Harkortstrasse 21-23, 40880 Ratingen, Germany
ASUSTeK (UK) LIMITED
Address: 1st Floor, Sackville House, 143-149 Fenchurch Street, London, EC3M 6BL, England, United Kingdom

Service and Support
Visit our multi-language website at https://www.asus.com/support.

Drivers and Utilities
For more information on downloading and installing drivers and utilities for your IPMI card, please scan the QR code below:

E21362
Revised Edition V2
October 2022
Copyright © ASUSTeK Computer Inc.
All Rights Reserved