EMOS 31-DCZW06 LED Metal Christmas Star User Manual

: June 9, 2024
: EMOS

Table of Contents

Introduction
Timer (T):
- Example
Changing the timer settings:
Customer Support
Read User Manual Online (PDF format)
Download This Manual (PDF format)

EMOS 31-DCZW06 LED Metal Christmas Star

Introduction

Do not connect the chain to power supply if it is in packaging.
Light sources are not replaceable.
Do not connect another Christmas light.
When handling, disconnect from the power network.
In case of malfunction, do not remove bulbs and do not repair the chain!
Do not interfere with the connection.
Use only with the power source supplied with the product
Suited for both indoor and outdoor use.
Should the light source rupture or become damaged, do not use the
light chain or leave it connected to the power supply. Instead, dispose of it in a safe, environment-friendly way.
The product is designed for decorative lighting.
The product is not a toy; do not put it in the hands of children!
Not suitable for year-long outdoor use.

WARNING – THIS LIGHT CHAIN MUST NOT BE USED WITHOUT THE APPROPRIATE GASKETS!
WARNING – RISK OF INJURY BY ELECTRICAL CURRENT! DO NOT USE WITH MISSING OR DAMAGED LIGHT SOURCES!

Timer (T):

The light chain has a built-in timer on the body of the transformer (adapter). After the first connection, the chain will be constantly lit. After the second connection (a green light will light up), the timer will be set to 6 hours. Afterwards, it turns off automatically and will remain off for 18 hours. The timer will operate automatically in these intervals (6 hours on/18 hours off) until turned off by making a third contact.

Example

The chain will turn on on 1 December at 18 o‘clock. It will remain lit until midnight, then turns off automatically. On 2 December, it will turn on automatically at 18 o‘clock and turn off again at midnight. That means that the chain only has to be turned on once, and it will automatically keep lighting in this fashion until you turn it off.

Changing the timer settings:

If you wish to change the time when the chain automatically turns on and off (e.g. 19 o‘clock until 1 o‘clock), all you need to do is turn off the chain at the desired time (if it is turned on) and then turn it on again.
Note: The timer may deviate by a few minutes per month. If you want to adjust the turn-on timer back to the original time, set the timer again.

EMOS spol. s r. o. declares that the LED Decoration is in compliance with the essential requirements and other relevant provisions of Directive.
The device can be freely operated in the EU. The Declaration of Conformity can be found at http://www.emos.eu/download.

Do not dispose with domestic waste. Use special collection points for sorted waste. Contact local authorities for information about collection points. If the electronic devices would be disposed on landfill, dangerous substances may reach groundwater and subsequently food chain, where it could affect human health.