Pelonis Infrared Quartz Heater Manual: PSH20Q3ABB & PSH20Q3AWW

The Pelonis Infrared Quartz Heater is a popular choice for those looking for an efficient and cost-effective heating solution. This user manual provides important safety instructions and guidelines for the proper use and maintenance of the PSH20Q3ABB and PSH20Q3AWW models. It is important to read and understand all instructions before using this heater to reduce the risk of fire, electric shock, and injury to persons. The manual includes information on electrical ratings, parts and features, operation instructions, safety features, reset instructions, care and maintenance, and specifications. Additionally, the manual provides contact information for service and support, as well as details on the one-year limited warranty and a free three-month warranty extension. By following the instructions provided in this manual, users can ensure safe and efficient operation of their Pelonis Infrared Quartz Heater.

PELONIS PSH20Q3ABB, PSH20Q3AWW Quartz Heater

IMPORTANT INSTRUCTIONS

PLEASE READ AND SAVE THESE IMPORTANT SAFETY INSTRUCTIONS
When using electrical appliances,basic precautions should always be followed to reduce the risk of fire,electric shock,and injury to persons,including the following:

1. Read all instructions before using heater.
2. This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. If provided, use handles when moving this heater. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9 m) from the front of the heater and keep them away from the sides and rear.
3. Extreme caution is necessary when any heater is used by or near children or invalids and whenever the heater is left operating and unattended.
4. Always unplug the heater when not in use.
5. Do not operate any heater with a damaged cord or plug or after the heater malfunctions, has been dropped or damaged in any manner.Discard heater, or return heater to an authorized service facility for examination, electrical or mechanical adjustment, or repair.
6.  Do not use the heater outdoors.
7. This heater is not intended for use in bathrooms, laundry areas and similar indoor locations. Never locate heater where it may fall into a bathtub or other water container.
8. Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Do not route cord under furniture or appliances. Arrange cord away from traffic area and where it will not be tripped over.
9.  CAUTION : This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of shock, this plug is intended to fit only one way in a polarized outlet. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. DO NOT attempt to compromise this safety feature. To do so could result in an electrical shock hazard.
10.  This heater draws 12.5 amps during operation. To prevent overloading a circuit, do not plug the heater into a circuit that already has other appliances working.
11.  CAUTION:It is normal for the plug to feel warm to the touch; however, a loose fit between the AC outlet and plug may cause overheating and distortion of the plug. Contact a qualified electrician to replace loose or worn outlet.
12. To disconnect the heater, first turn controls to the 0 position, then remove plug from outlet. Never pull by the cord.
13. Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the heater.
14. CAUTION: Always plug heaters directly into a wall outlet. Never use with an extension cord or relocatable power tap (outlet/power strip).
15. A heater has hot and arcing or sparking parts inside. Do not use it in the areas where gasoline, paint, or flammable liquids are used or stored.
16. Use this heater only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons.
17. The output of this heater may vary and its temperature may become intense enough to burn exposed skin. Use of this heater is not recommended for persons with reduced sensitivity to heat or an inability to react to avoid burns.
18. Don’t leave the heater on unattended.
19. To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, where openings may become blocked.

SAVE THESE INSTRUCTIONS.

ASSEMBLY

This heater is pre-assembled in factory.

ELECTRICAL RATINGS

This product is rated 12.5 amps (1500W) at 120V, 60 Hz.

PARTS AND FEATURES

• A: Thermostat Control
• B: Power and Setting Control
• C: Heating tube
• D: Power indicator light
• E: Safety Protect Bar(Caution: it’s not a handle. Can not hang the towels,clothes etc.)
• F:Rear cover
• G:Front cover

OPERATION INSTRUCTIONS

• Place the heater on a firm, level surface free from obstructions, and at least 3 ft. (0.9m) away from any wall or combustible material.

• With the Power and Setting Control in the O position, plug the heater into a 120V outlet. Always operate the heater in the upright position.

• To turn the heater on, while turning the Power and Setting Control to the desired position (1 for 500W 2 for 100OW 3 for 1500W ).
  Note: There is 1 heating tube illuminating at setting 1 and are 2 heating tubes
  illuminating at setting 2 and 3 heating tubes illuminating at setting3.

• When the room reaches a comfortable temperature, slowly turn the Thermostat Control counter-clockwise until the heater goes off. This is the point at which the thermostat setting equals the room temperature. At this setting, the thermostat will automatically turn the heater on and off to maintain this selected temperature.

• Turn the Power and Setting Control to 0 and unplug the heater when you finish using it.
  Note: The Safety Protect Bar will be hot while the heater is in use. Do not use it as a carrying handle. Please use the carry handle in the rear cover when moving the heater. You may notice vibration/noise coming from the grill and the interior quartz tubes when the heaters turned on. PLEASE NOTE THAT THIS IS A NORMAL AND SAFE OPERATION. Once the quartz heating element has warmed, the vibration/noise will go away.

SAFETY FEATURES

Safety off Switch: This heater is equipped with an automatic Safety Shut off Switch for overheat protection, which is activated when the internal temperature exceeds normal operating temperatures. If this occurs, turn the heater to ” 0″. Unplug the heater and allow it to cool. Inspect and carefully remove any objects on or adjacent to the heater. Plug the heater back in and resume normal operation.

Tip Over Switch: This heater includes a Safety Tip-Over Protection Feature which wil shut the heater off in case it is tipped over. If, at any time, the heater does tip over, put the heater back in the upright position. The heater will resume its normal peration.

RESET INSTRUCTIONS

If the unit shuts down please operate as follows.

1. Turn the unit off
2. Unplug unit wait 10 minutes
3. Plug in and turn on

IF YOUR HEATER FAILS TO OPERATE

• Be sure it is plugged in and that the electrical outlet is working. Check for any obstruction. If you find an obstruction turn the heater OFF. Unplug the heater and wait at least ten minutes for it to cool. Carefully remove the obstruction. Plug the heater back in and restart it as described under OPERATION.
• If you still notice the same defect above mentioned, remove the plug from the socket and have the appliance serviced by authorized service personnel only.

CARE AND MAINTENANCE

We recommend that the heater be cleaned at least once a month and before off- season storage.

• Turn the heater OFF and unplug it. Allow it to cool.
• Use a dry cloth to clean the external surfaces of the heater.

DO NOT USE WATER, WAX, POLISH ORANY CHEMICAL SOLUTION.

• Clean your heater using the above-mentioned steps, then pack the heater in its original container and store it in a cool dry place.
• This heater does not disassemble.

SPECIFICATIONS

Not exceed than 105%

SERVICE AND SUPPORT
In the event of a waranty claim or if service is required for this heater, please contact us at the following:
Tel: 1-866-646-4332

ONE (1) YEAR LIMITED WARRANTY

Please read all instructions before attempting to use this product. Midea America corporation warrants as limited herein to the original purchaser of retail that each new Electric quartz heater, shall be free of defects in material and workmanship for a period of one (1) year from the date of original purchase. This one (1) year warranty is limited to the heating elements, motor, and electric control circuit board. In the event of malfunctions or failure of your Electric quartz heater, simply deliver or send the heater, postage prepaid along with PROOF OF PURCHASE, within the warranty period of one (1) year, to Midea America Corporation. Midea America Corporation reserves the right to inspect the claimed defective part or parts to determine if the defect or malfunction complaint is covered by this warranty. Midea America Corporaon Care center shall, within sixty (60) days after receipt of the product,at its option, repair and/or replace the defective part or parts free of charge. This warranty shall only cover defects arising from normal usage. Midea America corporation Care center assumes no responsibility whatsoever if the Electric quartz heater should fail during the warranty period by reason of

• Misuse, negligence, physical damage or accidents.
• Lack of maintenance (see instructions for proper maintenance).
• Repair by any unauthorized party during the warranty period.
• Damage caused by connection to an improper input voltage (see specification label on your heater).

Midea America Corporation Care center makes no further warranties or representations, express or implied except those contained herein. No representative or dealer is authorized to assume any other liability regarding the Electric quartz heater. The duration of the implied warranty granted under State law, including warranties of merchantability and fitness for particular purpose are limited in duration should the duration of the express warranty grant it hereunder.Midea America Corporation Care center shall in no event be liable for direct, indirect, special or consequential damages. Some states do not allow limitations on how long an implied warranty lasts, andlor the above limitations or exclusion may not apply to you. This warranty gives you specific legal rights and you may have other rights which vary from state to state.

Free 3 months
extension” of the original limited warranty period! Simply text a picture of your proof of purchase to: 1-844-224-1614
The warranty extension is for the three months immediately following the completion of the product’s original warranty period.

FAQS

How do I reset my Pelonis Infrared Quartz Heater?

If the unit shuts down, turn the unit off, unplug unit wait 10 minutes, plug in and turn on.

What are the safety features of the Pelonis Infrared Quartz Heater?

The Pelonis Infrared Quartz Heater includes a Safety off Switch for overheat protection, which is activated when the internal temperature exceeds normal operating temperatures. It also includes a Safety Tip-Over Protection Feature which will shut the heater off in case it is tipped over.

How should I operate the Pelonis Infrared Quartz Heater?

Place the heater on a firm, level surface free from obstructions, and at least 3 ft. (0.9m) away from any wall or combustible material. With the Power and Setting Control in the O position, plug the heater into a 120V outlet. Always operate the heater in the upright position. To turn the heater on, while turning the Power and Setting Control to the desired position (1 for 500W 2 for 100OW 3 for 1500W). When the room reaches a comfortable temperature, slowly turn the Thermostat Control counter-clockwise until the heater goes off. This is the point at which the thermostat setting equals the room temperature. At this setting, the thermostat will automatically turn the heater on and off to maintain this selected temperature. Turn the Power and Setting Control to 0 and unplug the heater when you finish using it.

What are the electrical ratings for the Pelonis Infrared Quartz Heater?

The Pelonis Infrared Quartz Heater is rated 12.5 amps (1500W) at 120V, 60 Hz.

What is the warranty for the Pelonis Infrared Quartz Heater?

The Pelonis Infrared Quartz Heater comes with a one-year limited warranty. Midea America corporation warrants as limited herein to the original purchaser of retail that each new Electric quartz heater shall be free of defects in material and workmanship for a period of one (1) year from the date of original purchase. Additionally, there is a free three-month warranty extension.

How should I care and maintain my Pelonis Infrared Quartz Heater?

We recommend that the heater be cleaned at least once a month and before off- season storage. Turn the heater OFF and unplug it. Allow it to cool. Use a dry cloth to clean the external surfaces of the heater. DO NOT USE WATER, WAX, POLISH OR ANY CHEMICAL SOLUTION. Clean your heater using the above-mentioned steps, then pack the heater in its original container and store it in a cool dry place. This heater does not disassemble.

Can I use my Pelonis Infrared Quartz Heater in a bathroom or laundry area?

No, this heater is not intended for use in bathrooms, laundry areas, and similar indoor locations. Never locate the heater where it may fall into a bathtub or other water container.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>