GRANDSTREAM GWN7664LR High-Performance Outdoor Long-Range Wi-Fi 6 Access Point Installation Guide

GWN7664LR High-Performance Outdoor Long-Range Wi-Fi 6 Access Point
Installation Guide

GWN7664LR
High-Performance Outdoor Long-Range
Wi-Fi 6 Access Point
Quick Installation Guide

OVERVIEW

The GWN7664LR is an outdoor 802.11ax 4×4:4 Wi-Fi 6 access point for medium-to- large business and enterprises who need to provide longrange coverage in both indoor  and outdoor spaces. It offers weatherproof casing and heat resistant technology, dual-band 4×4:4 MU-MIMO with DL/UL OFDMA technology and a sophisticated antenna
design for maximum network through that supports 512 clients and an expanded 300-meter coverage range. To ensure easy installation and management, the GWN7664LR includes a built-in controller embedded within the product’s web user interface. It is also supported by GWN.Cloud and GWN Manager, Grandstream’s free cloud and on-premise Wi-Fi management platform. The GWN7664LR is  the ideal Wi-Fi AP for voice-over Wi-Fi deployment and offers a seamless connection with Grandstream’s Wi-Fi capable voice and video IP phones. With support for advanced QoS, low-latency real-time applications, mesh networks, captive portals and dual Gigabit networks ports with  oE/PoE+, the GWN7664LR is an ideal outdoor Wi-Fi access point for enterprises, multiple floor offices, warehouses, hospitals, schools and more.

PRECAUTIONS

• Do not attempt to open, disassemble, or modify the device.
• Do not expose this device to temperatures outside range of -30 °C to 60 °C for operating and -30 °C to 70 °C for storage.
• Do not expose the GWN7664LR to environments outside of the following humidity range: 10-90% RH (non-condensing).
• Do not power cycle your GWN7664LR access point during system boot up or firmware upgrade. You may corrupt firmware images and cause the unit to malfunction.

PACKAGE CONTENTS

GWN7664LR PORTS

PoE/PoE+.
NET/POE 1G| Ethernet RJ45 port (10/100/1Gbps) to your router or another GWN76xx, support PoE/PoE+.
RESET| Factory reset button. Press for 7 seconds to reset factory default settings.

POWERING AND CONNECTING THE GWN7664LR
GWN7664LR can be powered on using PoE/PoE+ switch using following steps:
Step 1: Plug a RJ45 Ethernet cable into the network port of the GWN7664LR.
Step 2: Plug the other end into the uplink port of the power over Ethernet (PoE/PoE+) switch.
RJ45 Ethernet Cable to power over Ethernet (PoE/PoE+) Switch

HARDWARE INSTALLATION

GWN7664LR can be mounted on the wall or on a metal bar, Please refer to the following steps for the appropriate installation.

Wall Mount

1. Connect the Ethernet cable (RJ45) to the correct ports of your GWN7664LR and insert the cover bracket.
2. Connect each antenna to an antenna connector by rotating it clockwise.
3. Attach the Base Bracket with screws (PM 3.0 x 7) on the back of GWN7664LR access point.
4. Insert screws (PA 3.5×33) through the Base Bracket and mark the mounting screw holes on the wall using a pencil.
5. Drill the holes in the spots that you have marked and slide the anchors into the wall. Secure the GWN7664LR access point to the wall by inserting the screws into the anchors.

Pole Mount

1. Connect the Ethernet cable (RJ45) to the correct ports of your GWN7664LR and insert the cover bracket.

2. Connect each antenna to an antenna connector by rotating it clockwise.

3. Attach the Base Bracket with screws (PM 3.0 x 7) on the back of the GWN7664LR access point.
   

4. Open the metal straps by turning the locking mechanism counter-clockwise. You can loosen it by hand or use a flathead screwdriver.

5. Straighten out the end of the metal straps and slide it through the back of the base bracket.

6. Wrap the metal strap around the pole and use a flathead screwdriver to tighten the locking mechanism by turning it clockwise.
   

CONNECT TO GWN7664LR DEFAULT Wi-Fi NETWORK
GWN7664LR can be used as a standalone access point out of the box, or after factory reset with Wi-Fi enabled by default.
After powering the GWN7664LR and connecting it to the network, GWN7664LR will broadcast a default SSID based on its MAC address GWN[MAC’s last 6 digits] and a  random password.
Note: GWN7664LR’s default password information is printed on the sticker in the back of the unit.

ACCESSING THE CONFIGURATION INTERFACE
A computer connected to the GWN7664LR’s SSID, or to the same network as the GWN7664LR can discover and access its configuration interface using one of the below methods:
Method 1: Discover GWN7664LR using its MAC Address

1. Locate the MAC address on the MAC tag of the unit, which is on the underside of the device, or on the package.
2. From a computer connected to the same network as the GWN7664LR, type in the following address using GWN7664LR’s MAC address on your browser https://gwn_.local

Example: If a GWN7664LR has the MAC address C0:74:AD:8C:4D:F8, this unit can be accessed by typing https://gwn_c074ad8c4df8.local on the browser.

Method 2: Discover GWN7664LR using GWN Discovery Tool

1. Download and install GWN Discovery Tool from the following link: https://www.grandstream.com/tools/GWNDiscoveryTool.zip
2. Open the GWN DiscoveryTool, and click on Scan.
3. The tool will discover all GWN76xx Access Points connected to the network showing their MAC and IP addresses.
4. Click on Manage Device to be redirected directly to the GWN7664LR’s configuration interface, or type in manually the displayed IP address on your browser.
5. Enter your username and password to log in. (The default administrator username is “admin” and the default random password can be found on the sticker on the GWN7664LR).

Notes:

• Make sure that the GWN7664LR is not already paired with another GWN76xx Access Point as slave, GWN7000 Router Series or GWN.
  Cloud, otherwise the configuration interface cannot be accessed

• If the GWN7664LR is already paired, make sure to unpair it first, or do a factory reset.

• It is the customer’s responsibility to ensure compliance with local regulations for frequency bands, transmit power and others.

• To manage GWN7664LR over the cloud, please refer to https://www.gwn.cloud.

The GNU GPL license terms are incorporated into the device firmware and can be accessed via the Web user interface of the device at my_device_ip/gpl_license.
It can also be accessed here: https://www.grandstream.com/legal/open-source- software To obtain a CD with GPL source code information please submit a written request to info@grandstream.com Refer to online documents and FAQ for more detailed information: https://www.grandstream.com/our-products

References

• Global Leader in Digital Customer Experience | Concentrix (CNXC)
• Grandstream Networks - Networking & Unified Communications
• Open Source Software
• Products | Grandstream Networks
• gwn

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>