SoundCore Infini Mini Soundbar A3370 User Manual

SoundCore Infini Mini Soundbar A3370

USER MANUAL

Model No.: A3370
51005000986 V02

What’s Included

Safety Instructions

• Avoid dropping.
• Do not disassemble.
• Do not submerge in water.
• Avoid extreme temperatures.
• Do not use the device outdoors during thunderstorms.
• Use original or certified cables.
• Do not use any corrosive cleaner/ oil to clean.
• The product should not be exposed to dripping or splashing water. The adapter shall be installed near the equipment and shall be easily accessible.

At a Glance

1. Status indicator

2. Power button
3. Volume-up control
4. Volume-down control
5. Source input
6.Wall mount holes
7. USB port (Service only)
8. AUX input
9. Optical input
10. Power input

Placement

1. Place the Sound bar on a solid surface.

2. To prevent any hazardous situations, no naked flame sources, such as lighted candles, should be placed on or in the vicinity.

Wall Mount Installation

1. Drill two holes on the wall (approximately 6mm in diameter). The distance between the two holes should be 400mm. Refer to image below:

Insert the two screw plugs into the drilled holes, then place the two screws in the screw plugs.

2. Tighten the screws with screwdriver and leave 4mm screw head outside

3. Hang the Sound bar on the wall.

Remote Control

1. Battery installation

2. Remote control buttons

Using Your Sound bar

1. Turn On/ Off

The Soundbar will automatically switch to standby mode when no audio input is received for over 15 minutes.

a. Connect to your TV

1. Connect optical cable to the optical output port of a stereo audio machine (such as TV/ CD/ VCR/ DVD player … etc).
2. Press the OPT button on the remote control to activate optical mode. The status indicator will be solid green.

Note: the status indicator light will stay on for 10 seconds.

b. AUX-In mode

1. Connect audio cable (3.5mm to RCA stereo audio cable) to the audio output port of a stereo audio machine (such as TV/ CD /VCR/ DVD player … etc).
2. Press the AUX button on the remote control to activate AUX mode. The status indicator will be solid cyan.

Note: the status indicator light will stay on for 10 seconds.

c. Bluetooth mode

1. Press Power button on the remote control to switch on the Sound bar.
2. Press the Bluetooth button on the remote control to activate Bluetooth mode.
3. Turn on the Bluetooth of your device, search for Soundcore lnfini Mini on your Bluetooth list then select connect.

Flashing Blue: Bluetooth mode is activated

Solid Blue: Connected to device

Note: the status indicator light will stay on for 10 seconds.

Warning:

• When turned on, Soundcore lnfini Mini Soundbar will automatically  connect to the last connected device 1f available. If not, press the Bluetooth button to activate Bluetooth mode.
• Having connection problems? Remove Soundcore lnfini Mini from your device’s Bluetooth history and ensure it’s less than 10 meters away. Then try pairing again. To get the best sound quality, make sure there is a clear line of sight between the connected device and your Sound bar.

d. Respond to your TV remote control

Use your own TV remote control to control your Soundbar (Applicable for most of Vizio /LG/ Philips TVs).
Press and hold Volume-down control and Source input button (on Sound bar) for more than 3 seconds to activate the remote control learning mode. The status indicator will flash to white in this stage.
Press Power button on the Soundbar and press the Power button on your TV remote control simultaneously, then the status indicator will flash to red.
Once your Sound bar is responding to your TV remote control, the status indicator on the sound bar will be solid red.

Note: only power, source input and volume of your Sound bar can be controlled by your TV remote control.

Note: refer to below table for setting up the buttons on your TV remote control. You can control power, source input and volume of your Sound bar once the TV remote control buttons are set up.

Note: When not in use, store your Sound bar in a cool place.

1. Press Power button on the remote control to switch on the Sound bar.
2. Press the Bluetooth button on the remote control to activate Bluetooth mode.
3. Turn on the Bluetooth of your device, search for Soundcore lnfini Mini on your Bluetooth list then select connect.

Declaration of Conformity

Hereby, Anker Innovations Limited declares that the radio equipment type A3370 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:
https://www.anker.com/products
Maximum output power: 4.0dBm
Frequency band: 2.4G band (2.4000GHz-2.4835GHz)

Specifications

Specifications are subject to change without notice

• Audio output: 20 W x 2

• Size : 550 x 63 x 94 mm / 21.6 x 2.5 x 3.7 in

• Weight (without packaging): 1190 g/ 42 oz

• Bluetooth version: V2.l + EDR

• Range: 10 m / 33 ft

DOWNLOAD

SoundCore Infini Mini Soundbar A3370 User Manual – [Download PDF]

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>