BOCCI 14.16 Square Light Instruction Manual

: June 9, 2024
: BOCCI

Table of Contents

BOCCI 14.16 Square Light
Dimensions
DESCRIPTION
Assembly
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BOCCI 14.16 Square Light

BOCCI 14.16 Square Light product

Dimensions

PENDANTS: sixteen
MOUNTING: white powder coated square canopy 600mm (23.6”) x 53mm (2”) deep
LAMPING: 1.5w LED or 10w xenon
COAX: ﬁxed lengths. 3000mm (10’) standard / up to 30500mm (100’) maximum
MATERIALS: cast glass, blown borosilicate glass, braided metal coaxial cable, electrical components, white powder coated canopy
WEIGHT: approximately 40.5kg (89.3lb)
POWER SUPPLIES: integral

DESCRIPTION

14.16 is a random conﬁguration of sixteen 16 pendants hung from a square canopy. The drop lengths of the pendants are randomized between a client speciﬁed range of heights to variously cluster and scatter. The result is an ambient installation or ﬁeld of light.
The 14 is an articulated, seamed cast glass sphere with a frosted cylindrical void that houses a low voltage lamp. Individual pendants are visually quite subtle, but gain tremendous strength when multiplied and clustered in large groups.
NOTES

Purchase replacement lamps online at www.bocci.com/shop/bulbs
Unless otherwise noted when ordering, all chandeliers will be outﬁtted to be xenon compatible.
As an alternative to a built-in power supply, Bocci recommends mounting power supplies remotely in an easily accessible and hidden location for ease of long-term maintenance.

Assembly

Note: All connections and power supplies are tested by our technicians before shipping. However, it is possible for ports/power supplies to come loose or damage during shipping.
Test each port before installing canopy to ceiling to catch any loose connections or faulty power supplies.
Measure and mark the light ﬁxture canopy position on the ceiling
Note: The client is responsible for providing a robust 16mm (5/8”) plywood backing or wood blocking to securely anchor to the structural substrate.
Connections from the plywood to the structural substrate are the client’s responsibility.
Measure the plywood so that it ﬁts within the canopy side walls (refer to detail above).
Anchor the plywood backing to the structural ceiling substrate.
Connect power supplies to line voltage.
Xenon (110V) or LED: connect the black wire to black and white wire to white wire.
Xenon (230V): connect black wire to brown wire and white wire to blue wire.
For the ground connection, connect the green wire with yellow stripe to the bare copper wire or green wire in the junction box.
Note: Bocci strongly recommends mounting power supplies remotely in a close, accessible and hidden location for ease of long term maintenance. Installation to be done by certiﬁed personnel to ensure compliance with the code.
Anchor canopy into the plywood backing using the fasteners provided.
Turn power to ﬁxture on.
Very carefully uncoil the braided coaxial cable in a spool like manner. Insert your index ﬁngers into opposite sides of the roll then rotate your ﬁngers around each other to unroll the coaxial cable.
Use patience: allow the cable to uncoil completely to avoid kinks.
Bocci 10w xenon or 1.5w LED lamps included. Lamping is power supply speciﬁc.
Plug the lamp into the socket. Do not touch the lamp with your bare hands.
Note: when using a dimmer use only low voltage electronic dimmer.
The borosilicate tube is an integral part to the structure of the pendant. Please contact for replacement if it is damaged at any point.
Each pendant terminates in a “headphone jack” type connector, which plugs into a receiving receptacle in the canopy. Clients are encouraged to compose their own pendant conﬁguration on site, thus creating a truly unique ﬁxture. After plugging in each pendant, turn the threaded sheath into place by hand ensuring that it is adequately tightened. Tools are not required.
Check that each lamp is working properly as you go along by keeping power to the ﬁxture on and lamps plugged in.
Clean ﬁngerprints from surfaces.