BOCCI 28.1 Random Pendant Lamp Instructions
- June 4, 2024
- BOCCI
Table of Contents
BOCCI 28.1 Random Pendant Lamp
DIMANTION
SPECIFICATION
- PENDANTS: one
- MOUNTING: shallow brushed nickel canopy 116mm (4.5”) in diameter x 7mm (0.3”) deep
- LAMPING: 1.5w LED or 20w xenon
- COAX: adjustable. 3000mm (10’) standard / up to 30500mm (100’) maximum
- MATERIALS: blown glass, braided metal coaxial cable, electrical components, brushed nickel canopy
- WEIGHT: approximately 1.3kg (3lb)
- POWER integral (power supply housed within junction box). Power
- SUPPLIES: supplies included
DESCRIPTION
The 28.1 is a single 28 pendant fi xture with a shallow brushed nickel canopy
designed to fi t over a new or existing 4” octagonal junction box. The canopy
is 116mm (4.5”) in diameter and 7mm (0.3”) deep, which creates a subtle profi
le that minimizes the impact in the application surface. The pendant drop
lengths on this light fi xture are adjustable up to the specifi ed maximum.
28 is an exploration of specifi city in manufacturing. Instead of designing
form itself, here the intent was to design a system of making that yields
form. Individual 28 pendants result from a complex glass blowing technique
whereby air pressure is intermittently introduced into and then removed from a
glass matrix which is intermittently heated and then rapidly cooled. The
result is
a distorted spherical shape with a composed collection of imploded inner
shapes, one of which acts as a shade for the light source.
Standard 28s are made with clear glass exterior spheres and milk-white
interior lamp holder cavities. 28s are possible with infi nite versatility in
colour compositions, sizes and shapes.
NOTES
- + Purchase replacement lamps online at www.bocci.com/shop/bulbs
- + Unless otherwise noted when ordering, all fixtures will be outfitted to be xenon compatible
PRODUCT INSTALLATION INSTRUCTIONS
-
Very carefully uncoil the braided coaxial cable in a spool-like manner. Insert your index fingers into opposite sides of the roll then rotate your fingers around each other to unroll the coaxial cable.
Use patience: allow the cable to uncoil completely to avoid kinks. -
Determine the overall drop for the pendant fi xture.
-
Thread the coaxial cable through the canopy, use a 2mm Allen key to loosen the setscrew in the canopy and gently feed the cable through until you have reached your desired drop length.
Use Allen key to tighten the setscrew to hold the strain relief and secure the coaxial cable at its new length. Perform a gentle tug test to ensure it is secure.
DO NOT OVERTIGHTEN.
Note: The strain relief is a black plastic collar around the coaxial cable. There is a single slot opening on the side of the strain relief component. It is essential that this opening is oriented at 90 degrees to set screw chamber. There can be no contact between the set screw and the cable.
RISK OF ELECTRIC SHORT! -
Xenon (110V) or LED: connect the black wire to black and white wire to white wire.
Xenon (230V): connect black wire to brown wire and white wire to blue wire.
Connect the coaxial cable to the open slots in the terminal block on the 12V side of the power supplies.
For multiple pendant installations, ensure that the braided outer wires are all connected to one 12V output wire and all inner insulated wires are connected to the other or a short will occur.
Once all coaxial connections are made, lift the fi xture into position and connect the line voltage to the open slot in the appropriate terminal block. -
The client is responsible
to ensure fasteners are attached to a robust structural substrate.
Tuck the power supply and wiring into the octagonal box, if available, and place canopy over top, lining up the fastener holes or connecting directly to structural ceiling surface. Affi x canopy with fasteners provided.
Turn power to fi xture on. -
Bocci lamps are included. Plug the lamp into the socket. Do not touch the lamp with your bare hands. Ensure power to lamp is working correctly.
Remove the center cap from 28 pendant. Install 28 pendant by sliding the center cap onto the coaxial cable, gently insert the lamp into the pedant, then tighten the center cap connection by hand.
DO NOT OVERTIGHTEN.
Remove the protective fi lm from the center cap after assembly.
Note: when using a dimmer use only low voltage electronic dimmer. -
Clean fingerprints from surfaces.
For additional assistance, please contact Bocci:
europe@bocci.com
www.bocci.com
US Patent # D687,740
EU Patent # 001695834-001 to 004
Made in Vancouver, Canada
© 2021, Bocci Design and Manufacturing Inc. All rights reserved. Any inquiries
should be directed to: info@bocci.com