BOCCI 100.16 100 Series Multi-Light Pendant Instruction Manual

: June 3, 2024
: BOCCI

Table of Contents

BOCCI 100.16 100 Series Multi-Light Pendant
Dimension
Specification
DESCRIPTION
Installation Instruction
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BOCCI 100.16 100 Series Multi-Light Pendant

BOCCI-100.16-100-Series-Multi-Light-Pendant-product

Dimension

Specification

PENDANTS: sixteen
MOUNTING: white powder-coated rectangular canopy 1100mm (43.3”) x 370mm (14.6”) x 53mm (2”) deep
LAMPING: 1.5w LED (2000K, 2500K, 3500K)
COAX: fixed lengths. 3000mm (10’) standard / up to 30500mm (100’) maximum
MATERIALS: blown glass, braided metal coaxial cable, electrical components, white powder-coated canopy
WEIGHT: approximately 54.2kg (119.5lb)
POWER SUPPLIES: Integral

DESCRIPTION

100.16 is a random conﬁ duration of sixteen 100 pendants hung from a rectangular canopy. The drop lengths of the pendants are randomized between a client speciﬁ ed range of heights to variously cluster and scatter. The result is an ambient installation or ﬁ eld of light. 100 brings multiple glass artists together in a performative act. Molten glass bubbles are prepared and then smashed together to produce unpredictable interlocking glass forms.

NOTES

Purchase replacement lamps online at www.bocci.com/shop/bulbs
All chandeliers will be outﬁ fitted with 2500K lamps if not speciﬁ ed.
As an alternative to a built-in power supply, Bocci recommends mounting Power supplies remotely in an easily accessible and hidden location for ease of long-term maintenance.

Installation Instruction

Note: Our technicians test all connections and power supplies before shipping. However, it is possible for ports/power supplies to come loose or damaged during shipping. Test each port before installing the canopy to the ceiling to catch any loose connections or faulty power supplies. Measure and mark the light ﬁxture canopy position on the ceiling.
Note: The client is responsible for providing a robust 16mm (5/8”) plywood backing or wood blocking to securely anchor to the structural substrate. Connections from the plywood to the structural substrate are the client’s responsibility. Measure the plywood so that it ﬁ ts within the canopy side walls (refer to detail above). Anchor the plywood backing to the structural ceiling substrate.
Connect power supplies to line voltage. Connect the black wire to the black and white wire to the white wire. For the ground connection, connect the green wire with a yellow stripe to the bare copper wire or green wire in the junction box.
Note:
Bocci strongly recommends mounting power supplies remotely in a close, accessible and hidden location for ease of long-term maintenance. Installation to be done by certiﬁ ed personnel to ensure compliance with the code.
Anchor the canopy into the plywood backing using the fasteners provided.
Turn power to ﬁ xture on.
Very carefully uncoil the braided coaxial cable in a spool-like manner. Insert your index ﬁngers into opposite sides of the roll then rotate your ﬁngers around each other to unroll the coaxial cable. Use patience: allow the cable to uncoil completely to avoid kinks.
Step 1: Attach the lamp holder to the pendant hardware with the set screw provided.
Plug the lamp into the lamp holder and slide on the diffuser. Do not touch the lamp with your bare hands. Ensure power to the lamp is working correctly.
Each pendant terminates in a “headphone jack” type connector, which plugs into a receiving receptacle in the canopy. Clients are encouraged to compose their own pendant conﬁ duration on site, thus creating a truly unique ﬁ xture. After plugging in each pendant, turn the threaded sheath into place by hand ensuring that it is adequately tightened. Tools are not required.
Check that each lamp is working properly as you go along by keeping power to the ﬁ xture on and lamps plugged in.
Please note that the crisp cut edges of the 100 pendants are fragile and can chip if not handled with care when installing and cleaning. Please ensure they do not have an impact during hanging. The best practice is to install Froomr oddities spindle offs title ﬁn excited to thee contact Bocci:
Bocci recommends wearing gloves during the installation. sales@bocci.co The edges of the glass may be www.bosharp to handlecci.com.
Step 2: Insert the pendant hardware assembly into the pendant.
Step 3: Tighten the 3 screws until they are fully engaged (refer to illustration above).
Give the pendant a gentle pull to ensure the screws are locked onto the pendant. Slide cover cap onto the coaxial cable and place into the inset portion of the pendant hardware.
The cap should sit ﬂat on the pendant hardware. If the screws are sticking out and the cap isn’t sitting ﬂat on the pendant hardware, please check to ensure the screws are fully engaged. Refer to steps 8 & 9 for more details.
Clean ﬁngerprints from surfaces.