NEXIGO N680E 1080p Autofocus Webcam User Manual
- June 9, 2024
- NEXIGO
Table of Contents
N680E 1080p Autofocus Webcam
User Manual
N680E 1080p Autofocus Webcam
1080p Autofocus Webcam
N680E User ManualScan the QR code or visit our link to download the latest
manual here: nexigo.com/manuals
WELCOME TO THE NEXIGO FAMILY!
Thank you for choosing the NexiGo N680E FHD Webcam!
You are now part of an exclusive club: the NexiGo family!
It’s our job to make sure you enjoy your membership. If you have any problems
please contact us at cs@nexigo.com anytime for further
assistance. Make sure to register your
purchase at nexigo.com/warranty within 14 days
of the delivery date to extend your warranty coverage to TWO Years!
From all of us here at NexiGo, we want to welcome you again to the family. We
thank you deeply for your trust and for your business. We know you’ll love it
here. We look forward to serving you again in the near future.
Yours Sincerely,
The NexiGo Team
CONTACT INFORMATION
Website: www.nexigo.com
Manufacturer: Nexight INC
E-mail: cs@nexigo.com
Tel: +1(458) 215-6088
Address: 11075 SW 11th St, Beaverton, OR, 97005, US
NEXIGO WEBCAM SETTINGS SOFTWARE
While all of our cameras are plug-and-play, this free software tool is best for those who want full control over settings like brightness, saturation, exposure, and focus. To download the latest version, head to nexigo.com/software.
PRODUCT OVERVIEW
- FHD Lens
- Power Indicator
- Light Adjustment Touch Control
- Flexible Clip/base
- Noise Reduction Microphone
- 1/4″ Tripod Screw Hole
PACKAGE INCLUDES
1 x FHD Webcam
2 x Privacy Cover
1 x User Manual
SPECIFICATION
Video resolution | 1920×1080@30fps, 1280×720@30fps,640×480@30fps |
---|---|
Sensor | 1/2.7-inch CMOS digital image sensor |
Focus type | Autofocus |
Field of view | D=80°/H=67°/V=42° |
Application support | Chat software: Skype, FaceTime, Zoom, Microsoft Teams, |
Hangouts, etc. Streaming software: Open Broadcaster Software and Xsplit Photo
or video: Using system Camera App (Camera for Windows, Photo Booth for macOS)
System requirements| • Windows 7/8/10/11 or above
• macOS 10.6 or above
• Chrome OS V29.01547 or above
SETTING UP YOUR WEBCAM
1. PLACE/POSITION YOUR WEBCAM
2. CONNECT THE WEBCAM TO YOUR COMPUTER USING THE USB CABLE Notes:
- Make sure you are connected to your network before starting the setup.
- If you cannot use the camera within other apps, you will need to enable access.
• In Windows: Select Settings>Privacy>Camera, turn on allow apps to access
your camera.
• On Mac: Select Apple menu>System Preferences> Security &
Privacy>Privacy>Camera, and select which apps you want to use the camera. If
you still have trouble connecting the Webcam, please refer to the FAQ sections
starting from Page 9.
3A. VIEW YOUR CAMERA: Windows
Windows users can use the Camera app, which is pre-installed with Windows. To
find the Camera app type “camera” (without the quotation marks) in the search
bar at the bottom of the screen and press enter. Alternatively, go to the
Start menu at the bottom right corner of the screen and left click. Scroll
through the list of programs there until you get to the “C” section, the
Camera application will be listed there. To view your webcam video you may
need to select the “NexiGo camera” from the list of other devices. At the top
right or left of your screen click the cycle camera icon (the arrow chasing
itself, not the gear), and keep switching until you get to the NexiGo webcam.
3B. VIEW YOUR CAMERA: Mac
Mac users can use the Photo Booth app, which is pre-installed with the OS.
This will allow you to preview the camera images, capture still frames, and
record video clips. To begin, select the Finder button, click Applications,
and select Photo Booth.Alternately, click the Search button in your menu bar,
type “photo booth” (without the quotation marks), and press return. To see an
image from your camera in Photo Booth, you may need to select the camera from
the list of attached devices in the app. At the top of your screen, click
Camera in the app menu, and select the Full HD Webcam from the list of
options.
4. VIDEO CALLING REQUIREMENTS
- A computer with speakers (or a headset), your NexiGo webcam, and a microphone;
- Install a video-calling application such as Skype, FaceTime, Zoom, or Hangouts. (Both parties need a webcam and the same video application.)
FCC REQUIREMENT
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
FAQ
Q1: How do I know if my camera is being recognized by the system?****
– A: Connect the camera to any USB 2.0 or USB 3.0 port.
– It will take a few seconds for the camera to be recognized after it is
connected to the system. To ensure the camera has been installed correctly on
a Windows computer; check under Control Panel>System and Security>Device
Manager.
To verify the webcam is connected on a Mac computer, click the Apple Menu (in
the top left corner of your screen) and then click About this Mac. Click on
System Report from the pop-up window that appears. The System Information
window for your Mac will appear. Navigate to the USB section and check if the
webcam is listed as a connected device (like the photo below):
Q2: What is the video recording frame-rate?****
– A: The NexiGo webcam captures clear images and can record video at 1080p/30fps in a well-lit environment. The quality of the signal can be affected by low bandwidth availability or insuffcient lighting. This can cause the frame rate to drop to 1080p/20fps, or possibly even lower.
Q3: What can I do if the images or video are an abnormal color? How to adjust image parameters such as brightness or contrast?****
– A: Please ensure that the light in your environment is free of unique tones
or intense light sources. Things such as walls/floors/other large-area non-
standard light sources, including areas with colored or intense light. In such
environments photographed pictures are subjected to color cast due to the
lighting impact of these light sources.
– For Windows & Mac:
– Using the NexiGo Webcam Settings Software, you can adjust the image
parameter you want according to your needs.
– Note: Download the NexiGo Webcam Settings Software from
nexigo.com/software.
Q4: Why is my video not in 1080p in my video calling application?****
– A: Check the video output settings in your video capture software, these may be set to a lower capture format. There are various constraints on the system that could impede the ability to attain a 1080p video calling session. They center around processing power (i.e. CPU speed) and available network bandwidth. In all cases, review the requirements from the video calling application. They will guide as to the system performance required as well as the necessary bandwidth.
Q5: How to use the webcam privacy shutter?
A: Step 1. Remove 3M tape backing on the back of the privacy cover.
Step 2. Attach the cover to the top of the webcam and press firmly.
Step 3. Open/close the cover as needed.
Q6: Why does my screen go blank or black while trying to preview images?****
– A: There are several reasons this could happen:
– 1. There is something wrong with the USB port. Please use a different USB
port or another PC and test the camera again.
– 2. The PC does not recognize the camera device.
– 3. The operating system and computer configuration do not satisfy the
requirements of the camera. Please check your system specifications.
– 4. The video preview feature of the application is not turned on, or the
application has a privacy feature that prohibits access to the camera. Please
try with a different application.
Q7: Why is there flickering or banding on the video feed when I use the webcam?****
– A: This might be due to lighting inconsistencies in your room. To resolve this, download the NexiGo Webcam Setting Software from nexigo.com/software. In the software, select your NexiGo webcam in the device selection bar, then change the powerline frequency to either 50Hz or 60Hz depending on your needs. For example, if your screen flicks at 50Hz, you can switch to 60Hz to solve it.
Note: The camera defaults to indoor mode. Please do not aim the camera directly at the light source.
Get in touch with FREE online services.
facebook.com/letsnexigo
Register to get EXTRA ONE YEAR warranty. Only valid in registering within 14
days of product
delivery.nexigo.com/warranty
References
- NexiGo Warranty Registration | NexiGo
- NexiGo | Home Theater Projectors & Video Collaborations
- NexiGo Warranty Registration | NexiGo
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>