e-filliate 320XBTS Wireless Splashproof Earphone User Manual
- June 8, 2024
- E Filliate
Table of Contents
- e-filliate 320XBTS Wireless Splashproof Earphone
- INTRODUCTION
- Controller Functions
- Charging the Wireless Earphones
- Pairing the Wireless Earphones
- Important Safety Information
- Limited Lifetime Warranty
- Federal Communications Commission (FCC) Statement
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
e-filliate 320XBTS Wireless Splashproof Earphone
INTRODUCTION
Thank you for purchasing the Wireless Splashproof Earphones 320XBTS. The earphones allow the user to listen to audio wirelessly from up to 100 feet (30.5m) from a paired phone or tablet. Please read these instructions carefully. It is recommended that you completely charge the earphones before using them for the first time. See “Charging the Wireless Earphones’section for more information. Note that the back of each earpiece is magnetic, so you can connect them for easy storage. Once the earphones are fitted securely in your ears, you can adjust the cord slide for a more secure fit.
Controller Functions
-
On/off: Press and hold the O button for three seconds to turn on/off
-
Music or video pause: Press the O button to pause playing, and press the button again to resume playback
-
Volume increase: Tap the + button
-
Volume decrease: Tap the – button
-
Next song: Press and hold the + button for one to two seconds
-
Previous song: Press and hold the – button for one to two seconds
-
Answer: Press the O button once
-
Hang up:
To reject an incoming call, press and hold the O button for two seconds To end call, press the O button once -
Voice Control- Siri/Google: Double-click the O button
Charging the Wireless Earphones
Charge the wireless earphones by connecting a Micro-USB charging cable to the earphones charging port. Plug the USB connector into a USB port on any computer or USB power adapter. When charging, a red light on the controller will illuminate. Once the light turns blue, the earphones are fully charged. When the earphones’ battery is empty, it will take up to two hours to fully charge.
Pairing the Wireless Earphones
For best results, place the earphones within one meter of your device during pairing. Power on the earphones by pressing and holding the o button on the earphone controller until you see the indicator light alternately flash blue and red. Voice prompts will indicate pairing mode is enabled. The pairing mode will be maintained for three minutes. Enable the Bluetooth function of your device search the Bluetooth device list and select “320XBTS” for pairing and connection. After the earphones are successfully paired to your device, the blue light on the earphones will blink slowly. Voice prompts will confirm pairing is successful. If pairing and connection are unsuccessful beyond three minutes, the earphones will automatically switch to stand-by mode. After pairing is completed, the earphones and your device Will recognize each other without pairing again. To remove the pairing connection, enter the Bluetooth settings of your phone. Select “320XBTS” and select the “Forget” option.
Important Safety Information
This product is splashproof, so it is designed to prevent perspiration or water droplets from affecting the performance during proper use. The earphones should not be submerged in liquid or used in areas with excessive moisture. Avoid operating or storing the earphones near fire, on stoves, or inside sealed cars in hot weather. Exposing them to fire may cause the earphones to generate heat or ignite.
Limited Lifetime Warranty
If this product ever fails, E-filliate will replace it. DO NOT
RETURN PRODUCT TO STORE. Simply call
1-800-592-7031, 8:00 a.m-5:00 p.m ET,
Monday – Friday, or e-mail us using
support@eflliate.com.
Products improperly used, abused or altered are not covered under this policy.
Customer Service
We’re here to help. If you have a problem with this product or have questions
on how to use it, please contact us. You do not need to contact the retailer
you purchased this product from. Please contact one of our service
representatives before shipping merchandise to us.
Federal Communications Commission (FCC) Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
support@efilliate.com
1-800-592-7031
E-filliate Inc.
11321 White Rock Road
Rancho Cordova, CA 95742 USA
Manufactured in China.
Distributed by:
E-filliate Inc.
11321 White Rock Rd.
Rancho Cordova CA 95742 USA