gekogear Orbit C100 7 Inch Infotainment Display Compatible User Manual

gecko gear Orbit C100 7 Inch Infotainment Display Compatible

DISCLAIMER

1. Please follow the set-up and usage instructions in the print material that came with this Display product.
2. You should not set/install this display at a place that would obstruct or reduce a driver’s view; make sure your usage complies with pertinent vehicle codes of your state, province, territory or country.
3. You should post the required notices of recordation to occupants inside the vehicle, if voices or other information/signal pertaining to in-vehicle activities will be recorded.
4. You should not change the infotainment settings or mode of operation or when the vehicle is in motion.
5. The optional driving warning signals, including any visual or audible reminding signals, should not replace your decision-making and judgment that are needed for the proper operation of the vehicle.
6. You should not leave the monitor in a visible spot when no one is inside the vehicle, to avoid attracting break-ins to steal the unit, or other property.
7. You should examine, check and/or verify the infotainment system at least every six (6) months, including the associated memory cards, to ensure the video reception and recording are working properly. For each use, you should verify that the infotainment unit, the visible lights and the audible sounds are working normally. If there are signs of non-operation or mal-function, you should immediately seek to replace the product and check to see if the product is covered under any applicable warranty.
8. 8. The Orbit C100 unit may have additional functionality, such as transmission and recordation of audible or GPS signal or other identification information. If you have privacy concerns about these functions, make sure you follow the instruction to disable these functions.
9. You should use the infotainment system unit in the way it is intended. You should not use the system unit in a way that would be illegal or that tends to physically damage the unit, or tends to cause danger to the safe operation of the vehicle or the occupants.

THANK YOU!

Thank you for purchasing the Orbit C100.
This user manual contains technical specifications and instructions for use, operate, and install. Please read this manual carefully before using.

PRODUCT OVERVIEW

This product is a high-definition display, with high-quality digital audio, and USB-C charging function.

PACKAGE CONTENTS

• Orbit C100 Display

• Suction Cup

• Car Charger

• User Manual

PRODUCT FEATURES

1. 7” IPS Touch Screen 600*1024
2. 2.4G/5G WIFI Connection
3. Bluetooth 5.0
4. Support Apple Car Play
5. Support Android Auto
6. Built-in Mic/Speaker
7. Support MICRO SD card up to 128GB
8. Voice Control
9. FM Transmission

PRODUCT BUTTON FUNCTION INSTRUCTION

1. 3.5m/Aux Port
2. USB-C Charging Port
3. Micro SD Slot
4. Mount Adjustment Knob
5. Power Button

WHERE TO INSTALL YOUR INFOTAINMENT MONITOR

CONNECTING TO A CAR

The Orbit C100 can be connected to a by using the supplied 12V charger that connects to the 12V port in your car.

BASIC OPERATION

POWER ON:

The Infotainment system will power on automatically when connected to the power source. To turn off or back on press the power button on the back of the monitor.

HOME SCREEN:

Control the volume, Bluetooth connection, settings, and brightness from the home screen.

TOUCHSCREEN NAVIGATION:

You can navigate the screen with the interactive touch screen by tapping and scrolling.

ADJUSTING DISPLAY SETTINGS:

From the home screen, you can adjust the brightness from dim to bright by tapping on the brightness icon on the bottom right and scrolling the slider bar.

ADJUSTING AUDIO SETTINGS:

From the home screen, you can adjust the audio settings by tapping the audio icon on the bottom left and scrolling the slider bar.

USING APPLE CARPLAY

1. Tap on the Car Play feature and follow your I phone’s Bluetooth pairing steps and search for Orbit C100, select it and it will pair.
2. If the pairing sequence does not work, tap on the setting icon and restart or unpair a previous connection.
3. Make calls using Car Play by utilizing Siri or using your vehicle’s built-in controls to make the call.
4. Navigate and receive traffic information using Maps mirrored from your phone onto the monitor.
5. Listen to your favorite music and podcasts using the most popular streaming services.
   

USING ANDROID AUTO

1. Tap on the Android Auto feature and follow your phone’s Bluetooth pairing steps and search for Orbit C100, select it and it will pair.
2. If the pairing sequence does not work, tap on the setting icon and restart or unpair a revious connection.
3. Make calls using Android Auto by utilizing Google assistant or using your vehicle’s built-in controls to make the call.
4. Navigate and receive traffic information using Maps mirrored from your phone onto the monitor.
5. Listen to your favorite music and podcasts using the most popular streaming services.
   

GENERAL USAGE

Wireless Car Play uses Bluetooth to set up the connection between the phone and the vehicle and then it switches to using WIFI for the actual functionality.

After the Bluetooth pairing is successful, the phone’s WIFI will automatically connect to the devices WIFI, and then disconnect the Bluetooth connection by default.

When the car stereo is powered on, it will try to automatically connect to the last connected phone.

Based on the working principle of the Car Play device, please pay attention to the following:

1. When enjoying the wireless Car Play/Android Auto function, the phone’s WIFI will be occupied by the device, other WIFI connections cannot be used during this period. If there is a conflict between other WIFI connections and the device’s WIFI, you may need to manually disconnect the connection of other WIFI to keep the wireless Car Play/Android Auto in use.
2. The auto-connection function of the car stereo requires you to keep the WIFI and Bluetooth of the mobile phone available. In addition, please set the WIFI network of the car stereo to “Auto-Connect”.
3. Since the car stereo will disconnect the Bluetooth connection after pairing, your phone’s Bluetooth may automatically connect to other devices, which may cause the car stereo mic input or sound playing to be unavailable. You may need to manually disconnect your phone from the other Bluetooth connections or switch off the Bluetooth directly to fix it. (Bluetooth plays a pairing role in the setup of the car player. When the pairing is completed, it only needs WIFI to keep working, you can then choose to turn off the Bluetooth or keep it on. However, when you use it again the next time, you still need to turn on Bluetooth, so that the car stereo can be automatically paired and connected.)

Note: In the drop-down menu of the mobile phone, you need to turn off Bluetooth first, and then turn off the WIFI connection to disconnect. If you only turn off the WIFI, and keep the Bluetooth on the car will keep trying to reconnect.

Phone Link

1. Click to enter the mirroring function for iPhone and Android phones.(you must use a supported USB cable to use this feature)
   

FM Transmission Feature

1. When turned on, the device will transmit the sound through the car’s speakers.
2. You must tune both the device and your car’s radio into the same station.
   

General Settings

| You can set the touch calibration (touch screen sensitivity) when the touch screen is not very sensitive; you can choose to restore to factory setting
---|---
| The input password is “112345”.
| You can change the sound effect, available effect: Jazz, Classic, Rock, Pop, Flat, User.
| You can adjust the brightness, contrast, hue, saturation.
| Choose the language (English, Spanish, French, Chinese).
| Setup the time and date for the device.
| You can change the background wallpaper.
| Check the system version of the device.

MAINTENANCE AND CARE

• Use a soft, lint-free cloth to clean the monitor screen.
• You should avoid extended exposure of the monitor to direct sunlight or extreme temperatures (either high or low temperature) which tend to degrade or damage the unit and its normal functionality.
• Store the monitor in a cool, dry place when not in use.

SPECIFICATIONS

Need more information? Visit our website via www.gekogear.com Feel free to contact our service team at support@gekogear.com if you have any additional questions.

LIMITED WARRANTY

Gecko Gear provides a one year limited warranty for all of its products against defects in materials and workmanship. During this period, Gecko Gear will repair or replace any product which proves to be defective. However, my gecko gear will not warrant any product which has been subject to improper handling, abuse, negligence, improper installation or unauthorized repair. The warranty will not cover products installed with components not approved by Gecko Gear and products where the sealed assembly trace has been broken. If you discover a defect, Gecko Gear will, at its option, repair or replace the product free of charge, provided you return it during the warranty period with freight charges prepaid to Gecko Gear. Before returning any product, you must obtain a Return Merchandise Authorization number (RMA). This RMA # must be clearly marked on the outside of the package you are returning for warranty service. Be certain to also include your name, shipping address (no PO Boxes), telephone number, and a copy of the invoice showing proof of purchase in the package.
Disclaimer: Please note that we strongly recommend professional installation of the hardwiring cable. You are free to attempt the installation yourself, however Geko Gear and our affiliates will not be held liable for any product and vehicle damage, or personal injuries sustained by you or others during this installation.

CUSTOMER SUPPORT

SUPPORT
FAQs: https://www.gekogear.com/faq
Email Support: support@gekogear.com
Telephone Support:
Toll Free: 800-795-6788
9:00AM to 5:00PM PST Monday – Friday

References

• gekogear.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>