COMMERCIAL ELECTRIC 1007665038 LED Spin Light With 3 Adjustable Heads User Guide

Item # 1007665038
Model # 566011410

USE AND CARE GUIDE
LED SPIN LIGHT ® WITH 3 ADJUSTABLE HEADS

Questions, problems, missing parts? Before returning to the store, call Commercial Electric
Customer Service 8 a.m. ­ 7 p.m., EST, Monday – Friday 9 a.m. – 6 p.m., EST, Saturday
1-877-527-0313
HOMEDEPOT.COM

1007665038 LED Spin Light With 3 Adjustable Heads

THANK YOU We appreciate the trust and confidence you have placed in Commercial Electric through the purchase of this LED light. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs. Thank you for choosing Commercial Electric!

Safety Information

WARNING: Carefully read and understand the information given in this manual before beginning the assembly and installation. Failure to do so so could lead to electric shock, fire, or other injuries which could be hazardous or even fatal.
WARNING: Ensure the electricity to the wires you are working on is shut off. Either remove the fuse or turn off the circuit breaker.
WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTICE: This device is not intended for use with emergency exits or emergency lighting, electronic timers, photocells, or with dimmer switch.
NOTICE: Do not use this Spin Light® with a dimmer switch.

NOTICE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

NOTICE: Added weight of the device may cause instability of a freestanding portable luminaire.

Warranty

WHAT IS COVERED
The manufacturer warrants this lighting fixture to be free from defects in materials and workmanship for a period of five (5) years from date of purchase. This warranty applies only to the original consumer purchaser and only to products used in normal use and service. If this product is found to be defective, the manufacturer’s only obligation, and your exclusive remedy, is the repair or replacement of the product at the manufacturer’s discretion, provided that the product has not been damaged through misuse, abuse, accident, modifications, alterations, neglect, or mishandling.

WHAT IS NOT COVERED
This warranty shall not apply to any product that is found to have been improperly installed, set-up, or used in any way not in accordance with the instructions supplied with the product. This warranty shall not apply to a failure of the product as a result of an accident, misuse, abuse, negligence, alteration, faulty installation, or any other failure not relating to faulty material or workmanship. This warranty shall not apply to the finish on any portion of the product, such as surface and/or weathering, as this is considered normal wear and tear.
The manufacturer does not warrant and specifically disclaims any warranty, whether express or implied, of fitness for a particular purpose, other than the warranty contained herein. The manufacturer specifically disclaims any liability and shall not be liable for any consequential or incidental loss or damage, including but not limited to any labor / expense costs involved in the replacement or repair of said product.
Contact the Customer Service Team at 1-877-527-0313 or visit www.HomeDepot.com.

Pre-Installation

PLANNING INSTALLATION
Read all instructions before installation. Before starting installation of this fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box.
This fixture can be installed two ways: 1) onto a keyless lamp holder, or 2) onto an electrical outlet box. Both installation options are described in this manual. This Guide will first show how to install the fixture onto a keyless lamp holder. This Guide will then show how to install the fixture onto an electrical outlet box.

NOTE: Keep your receipt and these instructions for proof of purchase.

TOOLS REQUIRED

PACKAGE CONTENTS

HARDWARE INCLUDED

NOTE: Hardware not shown to actual size.

Installation to a Keyless Lamp Holder

1. Preparing lamp holder for installation
   • Remove existing bulb.

2. Attaching the fixture to the keyless lamp holder
   • Screw the threaded base on the fixture body (A) clockwise into the keyless lamp holder (not included).

Installation to an Electrical Outlet Box

WARNING: RISK OF ELECTRIC SHOCK. Ensure the electricity to the wires you are working on is shut off. Either remove the fuse or turn off the circuit breaker before removing the existing light fixture or installing the new one.

1. Attaching the mounting screws to the electrical outlet box
   • Attach the mounting screws (BB) directly to the electrical outlet box.

2. Making the electrical connections
   • Connect the white wire from the Speed Mount™ socket (CC) to the white wire from the electrical outlet box.
   • Connect the black wire from the Speed Mount™ socket (CC) to the black wire from the electrical outlet box.
   • Cover the wire connections using the wire connectors (AA).
   • Wrap the wire connections with electrical tape for a more secure connection.
   • Wrap the ground wire from the electrical outlet box around the ground screw on the Speed Mount™ socket (CC) mounting bracket.
   • Position the wires back Ground Screw

3. Attaching the Speed Mount™ socket to the electrical outlet box
   • Select the mounting holes on the Speed Mount™ socket (CC) mounting bracket according to the size of the electrical outlet box.
   • Position the Speed Mount™ socket (CC) over the electrical outlet box, allowing the heads of the mounting screws (BB) to come through the large ends of the keyholes.
   • Turn the Speed Mount™ socket (CC) clockwise until the heads of the mounting screws (BB) slide into the narrow ends of the keyholes.
   • Tighten the mounting screws (BB) to secure the Speed Mount™ socket (CC) to the electrical outlet box.

4. Attaching the fixture body to the Speed Mount™ socket
   • Screw the threaded base on the fixture body (A) clockwise into the Speed Mount™ socket (CC).
   • Restore power at the electrical panel.
   • Turn on the light switch to activate the fixture.

Adjusting the Light Heads

This LED light fixture has three light heads that can each be adjusted to direct the light where desired.
• Move each light head into the desired position with your hand, from 0° with the head pointing straight down to 90°.
NOTE: The factory default setting for the adjustable heads is 0° beam angle, with the three heads positioned together pointing straight down.

Care and Cleaning

CAUTION: Before attempting to clean the fixture, disconnect the power to the fixture by turning the breaker off or removing the fuse from the fuse box.

• Clean the fixture with a soft, dry cloth.
• Do not use cleaners with chemicals, solvents, or harsh abrasives.
• Do not use liquid cleaner on the LEDs, LED driver, or wiring inside the light fixture.

Troubleshooting

WARNING: Before doing any work on the fixture, disconnect the power to the light fixture.
Minor problems often can be fixed without the help of an electrician.

Contact a qualified electrician.
There is a defective switch.| Contact a qualified electrician.
The fuse blows or the circuit breaker trips when the light is turned on.| The wires are crossed or the power wire is grounding out.| Check the wire connections.
Contact a qualified electrician or call Commercial Electric customer service 1-877-527-0313.

Light Distribution

Questions, problems, missing parts? Before returning to the store, call Commercial Electric Customer Service
8 a.m. – 7 p.m., EST, Monday – Friday 9 a.m. – 6 p.m., EST, Saturday 1-877-527-0313
HOMEDEPOT.COM
Retain this manual for future use.

HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>