MOUNTUP MU1004 Dual Monitor Desk Mount Arm Instruction Manual
- June 4, 2024
- MOUNTUP
Table of Contents
MOUNTUP MU1004 Dual Monitor Desk Mount Arm
Safety Caution
Please read this instruction carefully before installation. If you do not understand these instructions or have doubts about the safety of the installation, assembly or use of this product, please contact us.
WARNING:
This product contains small items that could be a choking hazard if swallowed.
Before starting assembly, verify all parts are included and undamaged. For
parts shortages or damage, please contact us.
Before Starting Assembly
When attaching brackets to the flat screen, be careful not to over-tighten screws and be sure that screws do not bottom out in the mounting holes.
Please make sure you don’t tighten the screws much excessively or it may cause your monitor damage.
Hardware Included
ASSEMBLY
Step 1-1 Assemble the stand
Assemble the pole and the base together using the included 4mm Allen key.
Step 1-2 Assemble the stand
Assemble the monitor arm and the pole toghther. 
Attach the cable clips 05 and 06 to the stand, then secure M-E to the screws C to the stand to prevent monitor arm turn over forward. Using the 5mm Allen key to fasten the bolt for fixing the monitor arm on the stand.
Step 2 Attach the VESA plates to the monitors
Step 3 Attach the monitors to the stand
Hang the monitors onto the monitor arm then using the 3mm Allen key to turn the screws L to adjust the monitors to the same level if necessary.
WARNING:
Hang 2 monitors onto the arm at the sam time to prevent
Step 4 Tilting Adjustment
Loosen tilting bolts, pull the monitor to your desired angle, then fasten tilting bolts with the 5mm Allen key.
Step 5 Switch screen horizontally and vertically
If needed, the monitor can be rotated ±90 degrees for switching screens horizontally and vertically for turn the monitors directly.
360° Rotation
This function works better for monitors with a center of gravity.
Note:
To ensure stability, the tightness of the rotating axis has been preset, so it
would be kind of difficult to rotate the VESA plate.
Suggestion:
Please attach the monitor first, then hold the two sides of it with both
hands, and rotate vigorously. If that doesn’t work out, please do not hesitate
to ask for our help via Amazon.
Manage tools and cables
Set the desired angle of the monitors
Product dimensions
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>