MOUNTUP MU0047 Long Arm TV Wall Mount Installation Guide
- May 15, 2024
- MOUNTUP
Table of Contents
MOUNTUP MU0047 Long Arm TV Wall Mount
Product Specifications
- Product Dimensions:
- 400mm/15.75″
- 300mm/11.81″
- 200mm/7.87″
- 100mm/3.94″
- Weight: 6.5mm/0.26 lbs
- Load Capacity: MAX 77 lbs (35 kg)
Frequently Asked Questions
- Q: What is the maximum weight capacity for this product?
- A: The maximum weight capacity is 77 lbs (35 kg).
- Q: Can I install this on a drywall alone?
- A: No, this product is designed for use in wood studs or solid concrete walls, not drywall alone.
- Q: How far should I mount the TV from the floor?
- A: Experts suggest a height of 42 inches from the centre of the TV to the floor for optimal viewing.
INSTALLATION INSTRUCTION
- If you have any questions, please feel free to contact our customer support before returning.
Safety Caution
Please read this instruction carefully before installation. If you do not understand these instructions or have doubts about the safety of the installation, assembly or use of this product, please contact us.
- This product is designed for use in wood studs or solid concrete walls.
- DO NOT install into drywall alone.
- The wall must be capable of supporting five times the weight of the TV and mount combined.
- Incorrect installation may result in product damage/property damage or body injury.
We shall bear no responsibility for any damage or injury resulting from
incorrect installation, incorrect assembly or misuse.
WARNING: This product contains small items that could be a choking hazard
if swallowed. Before starting assembly, verify all parts are included and
undamaged. If any parts are missing or damaged, do not return the damaged item
to your dealer; please contact our customer service team. Never use damaged
parts!
Must Check Before Getting Started
- Minimum VESA Pattern (W × H):
- 100mm × 100mm / 4 in × 4 in
- Maximum VESA Pattern (W × H):
- 400mm × 400mm / 16 in × 16 in
WARNING DO NOT exceed the maximum weight indicated. This mounting system is intended for use only within the maximum weights indicated. Use with products heavier than the maximum weights indicated may fail the mount and its accessories, causing possible damage or injury.
Verify Your Wall Construction
CAUTION
Avoid potential personal injuries and property damage! Drywall covering the
wall must not exceed 5/8 in. (16 mm).
Minimum wood stud size: nominal 2 x 4 in. (51 x 102 mm) actual 1 ½ x 3 ½ in.
(38 x 89 mm).
CAUTION
Avoid potential personal injuries and property damage!
Mount the wall plate assembly directly onto the concrete surface (no surface
covering).
CAUTION: DO NOT install into drywall alone.
Product Dimensions
Supplied Parts and Hardware
NOTE: Not all parts and hardware included will be used.
Extra Tools You Need (Not Supplied)
Attach Brackets to TV
Select VESA Plate Configuration
- Measure the width and the height of the square or rectangle formed from the VESA holes pattern. Select the configuration to use based on the measurement from the TV.
Assemble VESA Plate and Extenders (When VESA > 200mm)
- If your TV hole pattern is greater than 200×200mm, attach extenders (3A,3B) to VESA plate (02) using Carriage Bolts (C) and Flange Nuts (D).
Select TV Screws
Need Spacer?
- Yes, choose the appropriate screws, washers, and spacers for your TV.
- No, just choose the screws, washers.
Do not tighten the screws excessively or tighten them by using the Electrodrill, or your TV might be damaged.
Attach Wall Plate to Wall
OPTION A:
Wood Stud Installation
- Locate your studs. Verify and mark the centre of the stud by finding the stud edges using an awl and stud finder.
- Line up the holes with your stud centre line. Level the mounting template and mark the pilot hole locations.
Drill pilot holes using a Ф7/32 in (Ф5.5mm) diameter drill bit.
IMPORTANT:
Do not drill holes into where water pipes or electrical wires are located. Be
sure to drill into the centre of the stud.
- Install wall plate using lag bolts with Socket Wrench, NO Electrodrill.
- No anchors when installed onto the wood studs.
CAUTION
To avoid potential personal injury or property damage:
All 2 lag bolts MUST BE firmly tightened to prevent unwanted movement of the
wall plate assembly. Ensure the wall plate assembly is securely fastened to
the wall before continuing to the next step. To prevent the TV from falling,
the Arrow Must Keep UP at this step!!
OPTION B:
Solid Concrete Wall Installation
- Level the mounting template and mark the pilot hole locations.
Drill pilot holes using a Ф3/8 in (Ф10mm) diameter drill bit.
IMPORTANT:
Do not drill holes into where water pipes or electrical wires are located, or
mortar between blocks.
- Use the hammer to knock anchors (not included) into the concrete wall. Be sure the anchors are seated flush with the concrete surface.
- Install wall plate using lag bolts and anchors (not included) with Socket Wrench, NO Electrodrill.
CAUTION
To avoid potential personal injury or property damage:
All 3 lag bolts MUST BE firmly tightened to prevent unwanted movement of the
wall plate assembly. Ensure the wall plate assembly is securely fastened to
the wall before continuing to the next step. To prevent the TV from falling,
the Arrow Must Keep UP at this step!!
Hang and Secure the TV to Wall Plate
Adjustments (If necessary)
Leveling Adjustment
- If needed, the TV can be levelled ±3 degrees by adjusting the 2 screws with the opened wrench(B).
Tilt Adjustment
- Loosen the tilting bolts ×2.
- Adjust TV to your desired angle.
- Retighten the bolts to fix the intended angle.
Introduction to Applicable Scenarios
Crossing the wall
Wall corner installation
Documents / Resources
|
MOUNTUP MU0047 Long Arm TV Wall
Mount
[pdf] Installation Guide
MU0047 Long Arm TV Wall Mount, MU0047, Long Arm TV Wall Mount, TV Wall Mount,
Wall Mount, Mount
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>