MOUNTUP MU0036 Universal Swivel TV Stand Instruction Manual
- June 6, 2024
- MOUNTUP
Table of Contents
MOUNT UP MU0036 Universal Swivel TV Stand
Before getting started, let’s make sure this mount is perfect for you!
-
Is your TV VESA equal to/greater than 75x75mm/3×3″ and equal to/less than 400x400mm/16×16″?
-
Does your TV (including accessories) weigh less than 88 LBS ( 40 kg)?
-
Installation Tools (Not Include)
-
Safety Caution
Please read this lnstru::tlon carefully before installation.
If you do not understand have doubts about the safety of the installation, assembly or use of this product, please contact us.- Incorrect installation may result In product damage or body injury. MOUNT UP shall bear no responsibility for eny damage or injury resulting from incorrect installation, incorrect assembly er misuse.
- Do not apply this product to any purpose not indicated by MOUNT UP.
Parts List
FDR TV INSTALLATION
Step 1: Connecting the Support Pillar® to Tempered Glass Base (1)
Put tempered glass base (1) on the tabla. Put washer (A) and MBX25 bolt (A)
under tampered glass base … (1).
Tum plastic cover (G) and support pillar (2) upside down under tempered gins
base (1) and then tighten the bolts (A) with the 5mm allen key (F).
Connecting the TV Plate 3 to Support Pillar 2
Choose TV Screws and Spacers
Attaching TV to TV Plate 3 and Managing the Wires
Product dimension:
CAUTION AND MAINTENANCE:
- Never allow children to climb, stand, hang, or play on any part of stand.
- This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury.
- Check that the bracket is secure and safe to use at regular intervals (at least every three months).